TELEMECANIQUE

Soft starter for asynchronous motor - ATS01 - 3 A - 110..480V - 0.55..1.1 KW

SOFT START 110-480VAC 3A ATS01

SQDATS01N103FT ATS01N103FT 785901534181
64.72 / EACH
  • Certifications: B44.1-96/ASME A17.5 For Starter Wired To The Motor Delta Terminal, CCC, CSA, C-tick, GOST, UL
  • Country of Origin: Germany
  • Current: 15 A
  • Depth: 100 mm, 3.94 in
  • Height: 100 mm, 3.94 in
  • Number of Phases: 1
  • Standard: EN/IEC 60947-4-2
  • Warranty Length: 18 mth
  • Weight: 0.16 kg, 0.35 lb
  • Width: 0.91 in, 23 mm
This Altistart 01 soft starter is DIN rail mounted and can feed single or 3-phase asynchronous motors with a rating up to 3A. This Altistart 01 can be used for a motor rated power up to 1.1kW or 1.5hp for 3-phase (110V to 480V AC) and up to 0.37kW for single phase (110V to 230V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 22.5mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
  • Product Description
  • Specifications
This Altistart 01 soft starter is DIN rail mounted and can feed single or 3-phase asynchronous motors with a rating up to 3A. This Altistart 01 can be used for a motor rated power up to 1.1kW or 1.5hp for 3-phase (110V to 480V AC) and up to 0.37kW for single phase (110V to 230V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 22.5mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
  • Offer Sustainability
    • Mercury Free : Yes
    • Toxic Heavy Metal Free : Yes
    • WEEE : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    • EU RoHs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
    • California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    • REACh Free Of SVHC : Yes
  • Ordering And Shipping Details
    • GTIN : 00785901534181
    • Country Of Origin : DE
    • Nbr. Of Units In Pkg. : 1
    • Returnability : Yes
    • Category : 22392 - ATSU01/ATS01 LOW HP SOFT STARTERS
    • Discount Schedule : I11
  • Main
    • Range Of Product : Altistart 01
    • Device Short Name : ATS01
    • Utilisation Category : AC-53B EN/IEC 60947-4-2
    • Product Specific Application : Simple machine
    • Motor Power Hp : 0.5 hp, 3 phase 230 V || 0.5 hp, 3 phase 460 V || 1.5 hp, 3 phase 460 V
    • [Us] Rated Supply Voltage : 110...480 V - 10...10 %
    • Type Of Start : Start with voltage ramp
    • Icl Starter Rating : 3 A
    • Product Or Component Type : Soft starter
    • Product Destination : Asynchronous motors
    • Motor Power kW : 0.37 kW, 3 phase 230 V || 0.55 kW, 3 phase 230 V || 1.1 kW, 3 phase 400 V || 0.37 kW, 1 phase 230 V
    • Current Consumption : 15 A at nominal load
    • Network Number Of Phases : 1 phase
    • Power Dissipation In W : 19 W in transient state || 4 W at full load and at end of starting
  • Contractual Warranty
    • Warranty : 18 months
  • Environment
    • Electromagnetic Compatibility : Conducted and radiated emissions level B CISPR 11 || Conducted and radiated emissions level B IEC 60947-4-2 || Damped oscillating waves level 3 conforming to IEC 61000-4-12 || Electrostatic discharge level 3 conforming to IEC 61000-4-2 || EMC immunity EN 50082-1 || EMC immunity EN 50082-2 || Harmonics IEC 1000-3-2 || Harmonics IEC 1000-3-4 || Immunity to conducted interference caused by radio-electrical fields level 3 IEC 61000-4-6 || Immunity to electrical transients level 4 conforming to IEC 61000-4-4 || Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 || Micro-cuts and voltage fluctuation IEC 61000-4-11 || Voltage/current impulse level 3 conforming to IEC 61000-4-5
    • Ambient Air Temp For Storage : -13…158 °F (-25…70 °C) EN/IEC 60947-4-2
    • Product Certifications : CSA || GOST || C-tick || UL || CCC || B44.1-96/ASME A17.5 for starter wired to the motor delta terminal
    • Relative Humidity : 5…95 % without condensation or dripping water EN/IEC 60068-2-3
    • Pollution Degree : 2 EN/IEC 60947-4-2
    • Ambient Air Temp For Op : 14…104 °F (-10…40 °C) without derating) || 104…122 °F (40…50 °C) with current derating of 2 % per °C)
    • Vibration Resistance : 1 gn 13…150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3…13 Hz)EN/IEC 60068-2-6
    • IP Degree Of Protection : IP20
    • Operating Altitude : <= 3280.84 ft (1000 m) without derating || > 3280.84 ft (1000 m) with current derating of 2.2 % per additional 100 m
    • Shock Resistance : 15 gn 11 ms EN/IEC 60068-2-27
    • Standards : EN/IEC 60947-4-2
  • Complementary
    • Motor Starter Type : Soft starter
    • Depth : 3.94 in (100 mm)
    • Supply Frequency : 50...60 Hz - 5...5 %
    • Supply Voltage Limits : 99…528 V
    • Tightening Torque : 7.08 lbf.in (0.8 N.m)
    • Output Voltage : <= power supply voltage
    • Marking : CE
    • Height : 3.94 in (100 mm)
    • Width : 0.91 in (23 mm)
    • Assembly Style : With heat sink
    • Network Frequency : 47.5...63 Hz
    • Uc Control Circuit Voltage : 110 V AC +/- 10 % 30 mA || 24 V AC/DC +/- 10 % 25 mA || 240 V AC +/- 10 % 65 mA
    • Starting Time : 1 s / 100 || 5 s / 20 || Adjustable from 1 to 5 s
    • Operating Position : Vertical +/- 10 degree
    • Electrical Connection : Cage type connector - rigid 1 2.5 mm² AWG 14 control circuit || Cage type connector - rigid 1 2.5 mm² AWG 14 power circuit || Cage type connector - rigid 2 1 mm² AWG 17 control circuit || Cage type connector - rigid 2 1 mm² AWG 17 power circuit || Cage type connector - flexible with cable end 1 2.5 mm² AWG 14 control circuit || Cage type connector - flexible with cable end 1 2.5 mm² AWG 14 power circuit || Cage type connector - flexible without cable end 1 2.5 mm² AWG 14 control circuit || Cage type connector - flexible without cable end 1 2.5 mm² AWG 14 power circuit || Cage type connector - flexible with cable end 2 0.75 mm² AWG 18 control circuit || Cage type connector - flexible with cable end 2 0.75 mm² AWG 18 power circuit || Cage type connector - flexible without cable end 2 1 mm² AWG 17 control circuit || Cage type connector - flexible without cable end 2 1 mm² AWG 17 power circuit
    • Function Available : Integrated bypass
    • Product Weight : 0.35 lb(US) (0.16 kg)
    • Starting Torque : 30...80 % of starting torque of motor connected directly on the line supply
    • Motor Power Range Ac-3 : 0…0.5 kW 200…240 V 1 phase || 0…0.5 kW 200…240 V 3 phase || 0.55…1 kW 200…240 V 3 phase || 1.1…2 kW 380…440 V 3 phase
    • Compatibility Code : ATS01N1
    • Discrete Output Current : 2 A DC-13 || 3 A AC-15