2 Inch Form 7 (T) Conduit Body, Body Material Gray Iron with Zinc Plating and Baked on Epoxy Powder Coat with BlueKote Internal Coating for Use with Rigid/IMC Conduit

• Bodies are designed with a flat back, allowing more cubic inch capacity.
• Eliminates rough internal surfaces that can cut into cable jacket, insulation and conductors during pulling and also reduces installation time and risk of installer strain.
• Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes.
• T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7 bodies and covers.
• Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks.

• North American Specifications (UNSPSC)
• Type : Form 7 Conduit Body
• UNSPSC : 39131708 Electrical conduit fitting body
• Finish : Zinc Plated with Epoxy Powder Coat
• Application : Conduit Bodies are Installed In Conduit Systems to Connect Sections, Act As Pull Outlets When Conductors are Being Installed and Provide Easy Access for Splices In Branch Conductors.
• Standard : UL E2969, CSA
• Form : 7
• IGCC : 5563 Electrical conduit fitting body
• Brand Name : T&B
• Hub Size : 2 Inch
• Material : Gray Iron
• Special Features : BlueKote Teflon Based Internal Finish Provides a Slick, Easy-Glide Internal Surface Which Significantly Lowers The Amount of Force Necessary to Pull Wires.
• Packaging
• Outer Dimensions (inches) : 23.3x7x10.25
• Weight Uom : 600 lbs. per 100
• Inner Quantity : 2
• Outer Quantity : 10
• Inner Dimensions (inches) : 12.8x4.8x3.8