-
Country of Origin:
Mexico
-
Depth:
446 mm
-
Enclosure Type:
Weatherproof Enclosure Indoor/outdoor
-
Fuse Type:
H, K
-
Height:
1892 mm
-
Number of Poles:
3
-
Warranty Length:
18 mth
-
Width:
597 mm
Well-Guard pumping plant panels are designed for pumping applications. These panels provide extra space for field installation of auxiliary equipment. These panels use Type S non-reversing magnetic starters. Panel has a 400A fusible disconnect switch for Class H or K fuses. This panel has a 3 pole NEMA Size 5 non-reversing starter that has a 270 ampere rating. This NEMA Size 5 starter has maximum of 200 HP rating three phase. This non-reversing NEMA motor starter has a Motor Logic overload relay with a 90A to 270A range to sense over current conditions. This NEMA starter has a 10 kA maximum SCCR (Short Circuit Current Rating) per UL508A when protected by an appropriate circuit breaker or fuse. The starters in these panels are available with a wide variety of replaceable coil voltages. The starter in this device has a 440/480 VAC 50/60 Hz operating coil wired for common control. A painted sheet steel NEMA 3R rainproof enclosure is used to protect this starter. Enclosure is 75.50 inches tall, 22.00 inches wide and 17.55 inches deep. A wide variety of accessories are available for Type S starters. This pump panel is supplied with a START momentary push button and a HAND/OFF/AUTO selector switch. These NEMA pump panels with Type S starters are UL listed and marked Suitable for use as Service Equipment. They are also CSA certified.