This Altivar 212 variable speed drive can feed 3-phase asynchronous motors. Its protection index is IP21 and it has a built-in EMC filter. It works at a rated power up to 5.5kW / 7.5hp and a rated voltage from 380V to 480V AC. Its design is based on eco-

• Insulation Resistance
• >= 1 mOhm 500 V DC for 1 minute
• Power Range
• 4-6 kW 380-440 V 3 phase
• 4-6 kW 480-500 V 3 phase
• Connector Type
• 1 RJ45
• 1 open style
• Analogue Input Type
• VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits
• VIA switch-configurable voltage 0...10 V
• Continuous Output Current
• 12 A 380 V
• 12 A 460 V
• Prop 65
• WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Analogue Output Type
• FM switch-configurable voltage 0...10 V DC 7620 Ohm 10 bits
• FM switch-conf
• Response Time
• FM 2 ms +/- 0.5 ms analog
• FLA, FLC 7 ms +/- 0.5 ms discrete
• FLB, FLC 7 ms
• Communication Service
• read device identification (43)
• read holding registers (03) 2 words maximum
• write multiple registers (16) 2 words maximum
• write single register (06)
• monitoring inhibitable
• time out setting from 0.1 to 100 s
• Standards
• IEC 61800-3 category C3
• IEC 61800-3 category C2
• EN 61800-3 category C3
• EN 55011 class A group 1
• IEC 61800-3 environments 1 category C2
• IEC 61800-3 environments 1 category C3
• IEC 61800-3 environments 2 category C1
• IEC 61800-3 environments 2
• Ip Degree Of Protection
• IP20 on upper part without blanking plate on cover IEC 61800-5-1
• IP20 on upper part without blanking plate on cover IEC 6180
• Discrete Input Type
• F programmable 24 V DC level 1 PLC 4700 Ohm
• F programmable 24 V DC level 1 PLC
• Electrical Connection
• VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 2.5-2.5 mm² / AWG 14
• VIA, VIB, FM, FLA, FLB,
• Line Current
• 10.9 A 380 V
• 8.6 A 480 V
• Motor Slip Compensation
• not available in voltage/frequency ratio motor control
• automatic whatever the load
• adjustable
• Maximum Switching Current
• 5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R)
• 5 A 250 V AC resistive cos phi = 1 L/R = 0
• Frequency Resolution
• display unit 0.1 Hz
• analog input 0.024/50 Hz
• Protection Type
• overheating protection drive
• thermal power stage drive
• short-circuit between motor phases drive
• input phase breaks drive
• overcurrent
• Supply
• internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 A overload and short-circuit protection
• internal s
• Accessories
• VW3A21212
• TCSMCNAM3M002P
• Sampling Duration
• 2 ms +/- 0.5 ms F discrete
• 2 ms +/- 0.5 ms R discrete
• 2 ms +/- 0.5 ms RES discrete
• 2 ms +/-
• Linearity Error
• VIA +/- 0.15 % of maximum value input
• VIB +/- 0.15 % of maximum value input
• FM +/- 0.2 % output
• FM +/-
• Communication Port Protocol
• METASYS N2
• LonWorks
• BACnet
• Modbus
• APOGEE FLN
• Vibration Resistance
• 1.5 mm (f= 3-13 Hz) conforming to IEC 60068-2-6
• 1 gn (f= 13-200 Hz) conforming to EN/IEC 60068-2-8
• 1 gn (f=
• Option Card
• communication card LonWorks
• Persona Type Names
• End User
• Contractor
• Original Equipment Manufacturer
• OEM - Control Panelbuilder
• Panel Builder
• Environmental Characteristic
• classes 3C1 conforming to IEC 60721-3-3
• classes 3S2 conforming to IEC 60721-3-3
• Type Of Cable
• without mounting kit 1 IEC cable 45 °C, copper 90 °C / XLPE/EPR
• without mounting kit 1 IEC cable 45 °C, copper 90 °C / XLPE/EP
• Electromagnetic Compatibility
• electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
• radiated radio-frequency electro
• Supply Frequency
• 50...60 Hz - 5...5 %
• Apparent Power
• 9.1 kVA 380 V
• Relative Humidity
• 5-95 % without condensation IEC 60068-2-3
• 5-95 % without dripping water IEC 60068-2-3
• 5-95 % without dripping water IEC 60068-
• Persona Type Ids
• EU
• LC
• OM
• OM8
• PB
• Dielectric Strength
• 3535 V DC between earth and power terminals
• 5092 V DC between control and power terminals
• 5092 V DC between control and
• Us Rated Supply Voltage
• 380...480 V - 15...10 %
• Tightening Torque
• 1.3 N.m, 11.5 lb.in L1/R, L2/S, L3/T)
• 0.6 N.m VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)
• Minimum Switching Current
• 3 mA 24 V DC configurable relay logic
• Operating Altitude
• 3280.84...9842.52 ft (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m
• 3280.84...9842.52 ft (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network with current derat
• Noise Level
• 51 dB 86/188/EEC
• Discrete Input Logic
• positive logic (source) F, R, RES), <= 5 V, >= 11 V
• negative logic (sink) F, R, RES), >= 16 V, <=
• Asynchronous Motor Control Profile
• voltage/frequency ratio, 2 points
• voltage/frequency ratio, 5 points
• voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo)
• flux vector control without sensor, standard
• voltage/frequency ratio - Energy Saving, quadratic U/f
• Transient Overtorque
• 120-120 % of nominal motor torque +/- 10 % 60 s
• Discrete Output Type
• configurable relay logic FLA, FLC) NO - 100000 cycles
• configurable relay logic FLB, FLC) NC
• Shock Resistance
• 15 gn 11 ms IEC 60068-2-27
• Maximum Transient Current
• 13.2 A 60 s
• Discrete And Process Manufacturing
• building - HVAC compressor for scroll
• building - HVAC fan
• building - HVAC pump
• Local Signalling
• 1 LED (red) for DC bus energized
• Ambient Air Temperature For Operation
• -10-40 °C (without derating)
• 40-50 °C (with derating factor)
• Speed Accuracy
• +/- 10 % of nominal slip 0.2 Tn to Tn
• Product Certifications
• NOM 117
• CSA
• C-tick
• UL
• Switching Frequency
• 6...16 kHz adjustable
• 12...16 kHz with derating factor

• Complementary Attributes
• Maximum Horse Power Rating : 7.5 hp
• Important Information Attributes
• Local Data Status : Publishable
• Local Publishable Date : 2025-10-15
• Html Descr : Altivar 212 VFD7.5 HPContinuous Output Current: 12 ampsAC Line Input Line Voltage: 380/480 VAC Three Phase Input/OutputEnclosure Rating: IP20The Alitvar 212 drive includes: 3 logic inputs2 analog inputs
• Manufacturer : Schneider Electric
• Device Type : Variable speed drive - VSD Compacts
• Serviceability : No
• Traceability : Yes
• Field Service Division : IDIBS
• Average Life Duration : 10 year(s)
• Legacy WEEE Scope : In
• WEEE Product Category : 5
• Scope Perimeter : At least in Europe
• EOLI Availability Display : Yes
• End Of Life Doc Ref : ENVEOLI110204EN
• ROHS Eur In Scope : No
• ROHS Eur Status : Compliant with Exemptions
• ROHS Eur Conformity Date : 1916
• ROHS Eur Full Compliance Status : Pro-active compliance (Product out of EU RoHS legal scope)
• ROHS Eur Full Compliance Status Id : PRO_ACTIVE_COMPLIANCE
• China ROHS In Scope : Yes
• China ROHS Label : 5
• With Recycled Cardboard : Yes
• Without Single Use Plastic : Yes
• Product Contributes To Saved And Avoided Emissions : YES_SSI2
• Return Indicator : Y
• WD Status : 1 - GSC certified
• Tier Id : 4
• Tier : 4
• Function Option Id : ADVANCED
• Function Option : Advanced
• Market Segmentation Id : INDUSTRIAL
• Market Segmentation : Industrial
• Assembly Style : with heat sink
• Braking To Standstill : by DC injection
• Data Format : 8 bits, 1 stop, odd even or no configurable parity
• Device Short Name : ATV212
• Emc Filter : Class C2 EMC filter integrated
• Functionality : mid
• Isolation : electrical between power and control
• Marking : CE
• Motor Power Kw : 5.5 kW
• Motor Starter Type : variable speed drive
• Network Frequency : 47.5...63 Hz
• Nominal Switching Frequency : 12 kHz
• Number Of Addresses : 1-247
• Operating Position : vertical +/- 10 degree
• Package Weight Lbs : 3.069 kg
• Phase : 3 phase
• Power Dissipation In W : 215 W
• Product Availability : Stock - Normally stocked in distribution facility
• Product Destination : asynchronous motors
• Product Or Component Type : variable speed drive
• Product Specific Application : pumps and fans in HVAC
• Prospective Line Isc : 22 kA
• Range Of Product : Altivar 212
• Regulation Loop : adjustable PI regulator
• Returnability : Yes
• Specific Application : HVAC
• Speed Range : 1-10
• Supply Voltage Limits : 323-528 V
• Sustainable Packaging : Yes
• Torque Accuracy : +/- 15 %
• Transmission Frame : RTU
• Transmission Rate : 9600 bps or 19200 bps
• Type Of Polarization : no impedance
• Weee Label : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• Relationshiptype : Compatible relationship
• General Attributes
• Phase : 3 phase
• Product Or Component Type : variable speed drive
• Range Of Product : Altivar 212
• Output Attributes
• Analogue Output Number : 1
• Discrete Output Number : 2
• Output Voltage : <= power supply voltage
• Speed Drive Output Frequency : 0.5-200 Hz
• Surge Protection And Filtering Attributes
• Emc Filter : Class C2 EMC filter integrated
• Environment Attributes
• ROHS Exemption Information : Yes
• China ROHS Url : https://checkaproduct.se.com/DistantRequestDispatcher.aspx?action=exportPdfRoHSChina&pid=61737758&lang=en-us
• Take Back : No
• Recycled Metal Content At Cr Level : 0 %
• China ROHS Regulation : X
• Mercury Free : Yes
• Air Flow : 74 m3/h
• Ambient Air Temperature For Storage : -25-70 °C
• Circularity Profile : ENVEOLI110204EN
• Environmental Disclosure : ENVPEP110204EN
• Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
• Packaging Made With Recycled Cardboard : Yes
• Packaging Without Single Use Plastic : Yes
• Contractual Warranty Attributes
• Warranty Period : 18 months
• Warranty : 18 months
• Input Attributes
• Analogue Input Number : 2
• Specifications
• Country of Origin : Indonesia
• Height : 7.24 in
• Width : 5.59 in
• Depth : 5.91 in