-
Certifications:
CB, CCC, EAC, IEC, TR, UA, UKCA
-
Contact Configuration:
1 NO + 1 NC, 2 NO + 2 NC
-
Depth:
99 mm
-
Height:
85 mm
-
Impedance:
2.5 MOhm - Ith 25 A 50 Hz For Power Circuit
-
Net Weight:
0.365 kg
-
Standard:
DIN 5510-2, EN 45545: R22 HL3, EN 45545: R26 HL3, EN/IEC 60947-4-1, EN/IEC 60947-5-1
-
Storage Temperature:
-60-80 °C
-
Warranty Length:
18 mth
-
Width:
45 mm
This TeSys D contactor has been designed for motor control in railway applications. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 25A resistive load rating. Contactor is supplied with a low consumption 72 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product. Contactor is also compliant with the railway European standard EN 45545 R22HL3.
