-
Certifications:
BV, CB, CCC, CSA, DNV-GL, EAC, LROS (Lloyds Register Of Shipping), RINA, UKCA, UL
-
Contact Configuration:
2 NO + 2 NC
-
Depth:
196 mm
-
Height:
127 mm
-
Impedance:
0.8 MOhm - Ith 125 A 50 Hz For Power Circuit
-
Net Weight:
2.91 kg
-
Standard:
CSA C22.2 No 14, EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL 508
-
Warranty Length:
18 mth
-
Width:
96 mm
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 125A resistive load rating. Contactor is supplied with a 220 VDC coil. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.78 inches wide and 7.72 inches deep. It weighs 6.42 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
