TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 65A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 20HP at 200 to 208VAC, 20HP at 240VAC, 40HP at 480VAC and 50HP at 600VAC three phase. Contactor is also rated for 5HP at 115VAC and 10HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 125A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 200 VAC 60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.90 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards.

• Prop 65
• WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

• Environment
• Product Certifications : LROS (pending) || UL || BV || CCC || GL || CSA || RINA || GOST || DNV || UKCA
• Net Weight : 1.4 kg
• Flame Retardance : V1 conforming to UL 94
• Operating Altitude : 9842.52 ft (3000 m) without derating
• Width : 75 mm
• Depth : 119 mm
• Permissible Ambient Air Temperature Around The Device : -5-60 °C || -40-70 °C at Uc
• Height : 127 mm
• Standards : CSA C22.2 No 14 || IEC 60947-5-1 || EN 60947-4-1 || UL 508 || IEC 60947-4-1 || EN 60947-5-1
• Climatic Withstand : IACS E10 exposure to damp heat
• Ip Degree Of Protection : IP2X IEC 60529 || IP2X VDE 0106
• Mechanical Robustness : shocks contactor opened 10 Gn for 11 ms) || shocks contactor closed 15 Gn for 11 ms) || vibrations contactor opened 2 Gn, 5...300 Hz) || vibrations contactor closed 4 Gn, 5...300 Hz)
• Fire Resistance : 850 °C IEC 60695-2-1
• Contractual warranty
• Warranty : 18 months
• Environmental data
• Mercury Free : Yes
• Reach Regulation : Free of Substances of Very High Concern above the threshold
• Reach Free Of Svhc : Yes
• Weee : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• Take-Back : No
• Sustainable Packaging : Yes
• Carbon Footprint (Kg Co2 Eq, Total Life Cycle) : 82.93338411
• Rohs Exemption Information : Yes
• Packaging Made With Recycled Cardboard : Yes
• Environmental Disclosure : ENVPEP110205EN
• Packaging Without Single Use Plastic : Yes
• Toxic Heavy Metal Free : Yes
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
• Circularity Profile : N/A
• Pvc Free : Yes
• Eu Rohs Directive : Compliant
• Complementary
• Non-Overlap Time : 1.5 ms on de-energisation between NC and NO contacts || 1.5 ms on energisation between NC and NO contacts
• Minimum Switching Current : 5 mA for control circuit
• Power Dissipation Per Pole : 6.4 W AC-1
• Average Impedance : 1 mOhm - Ith 80 A 50 Hz for power circuit
• Auxiliary Contact Composition : 1 NO + 1 NC
• Terminals Description Iso N°1 : (21-22)NC || (13-14)NO || (A1-A2)CO
• Mounting Support : plate || rail
• Insulation Resistance : > 10 MOhm for control circuit
• Inrush Power In Va : 140-140 VA cos phi 0.75 (at 20 °C) || 160-160 VA cos phi 0.75 (at 20 °C)
• [Uimp] Rated Impulse Withstand Voltage : 8 kV IEC 60947
• Pole Contact Composition : 3 NO
• Connections - Terminals : control circuit: screw clamp terminal 1 1-4 mm² - cable stiffness: solid without cable end || control circuit: screw clamp terminal 2 1-4 mm² - cable stiffness: solid without cable end || control circuit: screw clamp terminal 1 1-2.5 mm² - cable stiffness: flexible without cable end || control circuit: screw clamp terminal 2 1-2.5 mm² - cable stiffness: flexible without cable end || control circuit: screw clamp terminal 1 1-4 mm² - cable stiffness: flexible with cable end || control circuit: screw clamp terminal 2 1-4 mm² - cable stiffness: flexible with cable end || power circuit: connector 1 2.5-35 mm² - cable stiffness: solid with cable end || power circuit: connector 2 2.5-35 mm² - cable stiffness: solid with cable end || power circuit: connector 1 2.5-35 mm² - cable stiffness: flexible without cable end || power circuit: connector 2 2.5-25 mm² - cable stiffness: flexible without cable end || power circuit: connector 1 2.5-35 mm² - cable stiffness: flexible with cable end || power circuit: connector 2 2.5-35 mm² - cable stiffness: flexible with cable end
• Coil Technology : without built-in bidirectional peak limiting diode suppressor
• Maximum Operating Rate : 3600 cyc/h at 60 °C
• Auxiliary Contacts Type : mirror contact 1 NC IEC 60947-4-1 || mechanically linked 1 NO + 1 NC IEC 60947-5-1
• Hold-In Power Consumption In Va : 13-13 VA 50 Hz cos phi 0.3 (at 20 °C) || 15-15 VA 60 Hz cos phi 0.3 (at 20 °C)
• Overvoltage Category : III
• Maximum Horse Power Rating : 10 hp at 230/240 V AC 60 Hz for 1 phase motors conforming to CSA || 10 hp at 230/240 V AC 60 Hz for 1 phase motors conforming to UL || 20 hp at 200/208 V AC 60 Hz for 3 phase motors conforming to CSA || 20 hp at 200/208 V AC 60 Hz for 3 phase motors conforming to UL || 20 hp at 230/240 V AC 60 Hz for 3 phase motors conforming to CSA || 20 hp at 230/240 V AC 60 Hz for 3 phase motors conforming to UL || 5 hp at 115 V AC 60 Hz for 1 phase motors conforming to CSA || 5 hp at 115 V AC 60 Hz for 1 phase motors conforming to UL || 50 hp at 460/480 V AC 60 Hz for 3 phase motors conforming to CSA || 50 hp at 460/480 V AC 60 Hz for 3 phase motors conforming to UL || 50 hp at 575/600 V AC 60 Hz for 3 phase motors conforming to CSA || 50 hp at 575/600 V AC 60 Hz for 3 phase motors conforming to UL
• Motor Power Kw : 30 kW at 440 V AC 50/60 Hz || 30 kW at 380...400 V AC 50/60 Hz || 37 kW at 500 V AC 50/60 Hz || 37 kW at 660...690 V AC 50/60 Hz || 18.5 kW at 220...230 V AC 50/60 Hz || 30 kW at 415 V AC 50/60 Hz || 37 kW at 1000 V AC 50/60 Hz
• [Ui] Rated Insulation Voltage : control circuit 600 V CSA || control circuit 600 V UL || power circuit 600 V CSA || power circuit 600 V UL || control circuit 690 V IEC 60947-1 || power circuit 690 V IEC 60947-1
• Protective Cover : with
• [Ith] Conventional Free Air Thermal Current : 10 A (at 60 °C) for control circuit || 80 A (at 60 °C) for power circuit
• Control Circuit Voltage Limits : 0.3...0.6 Uc (60-60 °C):drop-out AC 50/60 Hz || 0.85...1.1 Uc (60-60 °C):operational AC 60 Hz
• Control Circuit Type : AC 60 Hz
• Safety Reliability Level : B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
• Rated Breaking Capacity : 1000 A at 440 V for power circuit conforming to IEC 60947
• Irms Rated Making Capacity : 140 A AC for control circuit conforming to IEC 60947-5-1 || 1000 A at 440 V for power circuit conforming to IEC 60947
• Associated Fuse Rating : 10 A gG for control circuit conforming to IEC 60947-5-1 || 125 A gG at <= 690 V coordination type 1 for power circuit || 125 A gG at <= 690 V coordination type 2 for power circuit
• Operating Time : 12...26 ms closing || 4...19 ms opening
• Minimum Switching Voltage : 17 V for control circuit
• Tightening Torque : control circuit 1.2 N.m screw clamp terminal flat Ø 6 mm || control circuit 1.2 N.m screw clamp terminal Philips No 2 || power circuit 5 N.m screw clamp terminal flat Ø 6 mm || power circuit 5 N.m screw clamp terminal flat Ø 8 mm || control circuit 1.2 N.m screw clamp terminal pozidriv No 2
• Mechanical Durability : 6000000 cycles
• Compatibility Code : LC1D
• Heat Dissipation : 4-5 W at 50/60 Hz for control circuit
• Specifications
• Country of Origin : Czechia
• Width : 75 mm
• Height : 127 mm
• Weight : 1.4 kg
• [Uc] Control Circuit Voltage : 200 V AC 60 Hz
• [Ue] Rated Operational Voltage : power circuit <= 690 V AC 25...400 Hz
• Contactor Application : motor control || resistive load
• Product Or Component Type : contactor
• Utilisation Category : AC-3 || AC-4 || AC-1 || AC-2 || AC-3e
• [Ie] Rated Operational Current : 80 A (at <60 °C) at <= 440 V AC AC-1 for power circuit || 65 A (at <60 °C) at <= 440 V AC AC-3 for power circuit || 65 A (at <60 °C) at <= 440 V AC AC-3e for power circuit
• Poles Description : 3P
• Range Of Product : TeSys Deca
• Range : TeSys
• Device Short Name : LC1D