TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 50A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 15HP at 200 to 208VAC, 15HP at 240VAC, 40HP at 480VAC and 40HP at 600VAC three phase. Contactor is also rated for 3HP at 115VAC and 7.5HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 110A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 48 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.87 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards.

• Prop 65
• WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

• Environment
• Product Certifications : CCC || BV || CSA || GOST || UL || DNV || GL || LROS (Lloyds register of shipping) || UKCA
• Net Weight : 2.185 kg
• Flame Retardance : V1 conforming to UL 94
• Operating Altitude : 0...9842.52 ft (0...3000 m)
• Width : 85 mm
• Depth : 176 mm
• Height : 127 mm
• Standards : UL 508 || IEC 60947-5-1 || EN 60947-4-1 || EN 60947-5-1 || CSA C22.2 No 14 || IEC 60947-4-1
• Climatic Withstand : IACS E10 exposure to damp heat
• Ip Degree Of Protection : IP2X VDE 0106 || IP2X IEC 60529
• Mechanical Robustness : shocks contactor closed 15 Gn for 11 ms) || vibrations contactor opened 2 Gn, 5...300 Hz) || vibrations contactor closed 4 Gn, 5...300 Hz) || shocks contactor opened 10 Gn for 11 ms)
• Fire Resistance : 850 °C IEC 60695-2-1
• Contractual warranty
• Warranty : 18 months
• Environmental data
• Mercury Free : Yes
• Reach Regulation : Free of Substances of Very High Concern above the threshold
• Reach Free Of Svhc : Yes
• Weee : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• Take-Back : No
• Sustainable Packaging : Yes
• Carbon Footprint (Kg Co2 Eq, Total Life Cycle) : 84.65613776
• Rohs Exemption Information : Yes
• Packaging Made With Recycled Cardboard : Yes
• Environmental Disclosure : ENVPEP110205EN
• Packaging Without Single Use Plastic : Yes
• Toxic Heavy Metal Free : Yes
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
• Circularity Profile : N/A
• Pvc Free : Yes
• Eu Rohs Directive : Compliant
• Complementary
• Non-Overlap Time : 1.5 ms on energisation between NC and NO contacts || 1.5 ms on de-energisation between NC and NO contacts
• Minimum Switching Current : 5 mA for control circuit
• Power Dissipation Per Pole : 9.6 W AC-1 || 3.7 W AC-3e || 3.7 W AC-3
• Auxiliary Contact Composition : 1 NO + 1 NC
• Mounting Support : rail || plate
• Hold-In Power Consumption In W : 7.4-7.4 W 20 °C
• Insulation Resistance : > 10 MOhm for control circuit
• Inrush Power In Va : 160-160 VA cos phi 0.75 (at 20 °C)
• [Uimp] Rated Impulse Withstand Voltage : 8 kV IEC 60947
• Pole Contact Composition : 3 NO
• Connections - Terminals : control circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: rigid without cable end || control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: flexible without cable end || control circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: flexible without cable end || control circuit: screw clamp terminals 1 1-2.5 mm² - cable stiffness: flexible with cable end || control circuit: screw clamp terminals 2 1-2.5 mm² - cable stiffness: flexible with cable end || power circuit: screw terminals 1 2.5-25 mm² - cable stiffness: rigid || power circuit: screw terminals 2 2.5-16 mm² - cable stiffness: rigid without cable end || power circuit: screw terminals 1 2.5-25 mm² - cable stiffness: flexible without cable end || power circuit: screw terminals 2 2.5-16 mm² - cable stiffness: flexible without cable end || power circuit: screw terminals 1 2.5-25 mm² - cable stiffness: flexible with cable end || power circuit: screw terminals 2 2.5-10 mm² - cable stiffness: flexible with cable end || control circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: rigid || control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: rigid
• Coil Technology : built-in bidirectional peak limiting diode suppressor
• Maximum Operating Rate : 3600 cyc/h at 60 °C
• Inrush Power In W : 19-19 W 20 °C)
• Auxiliary Contacts Type : mirror contact 1 NC IEC 60947-4-1 || mechanically linked 1 NO + 1 NC IEC 60947-5-1
• Hold-In Power Consumption In Va : 15-15 VA 50 Hz cos phi 0.3 (at 20 °C)
• Overvoltage Category : III
• Maximum Horse Power Rating : 7.5 hp at 230/240 V AC 60 Hz for 1 phase motors || 15 hp at 200/208 V AC 60 Hz for 3 phase motors || 15 hp at 230/240 V AC 60 Hz for 3 phase motors || 40 hp at 460/480 V AC 60 Hz for 3 phase motors || 40 hp at 575/600 V AC 60 Hz for 3 phase motors || 3 hp at 115 V AC 60 Hz for 1 phase motors
• Motor Power Kw : 25 kW at 415 V AC 50 Hz (AC-3) || 30 kW at 440 V AC 50 Hz (AC-3) || 30 kW at 500 V AC 50 Hz (AC-3) || 33 kW at 660...690 V AC 50 Hz (AC-3) || 15 kW at 220...230 V AC 50 Hz (AC-3) || 11 kW at 400 V AC 50 Hz (AC-4) || 30 kW at 1000 V AC 50 Hz (AC-3) || 22 kW at 380...400 V AC 50 Hz (AC-3e) || 25 kW at 415 V AC 50 Hz (AC-3e) || 30 kW at 440 V AC 50 Hz (AC-3e) || 30 kW at 500 V AC 50 Hz (AC-3e) || 33 kW at 660...690 V AC 50 Hz (AC-3e) || 15 kW at 220...230 V AC 50 Hz (AC-3e) || 30 kW at 1000 V AC 50 Hz (AC-3e) || 22 kW at 380...400 V AC 50 Hz (AC-3)
• [Ui] Rated Insulation Voltage : control circuit 600 V UL || power circuit 600 V CSA || power circuit 600 V UL IEC 60947-1 || control circuit 690 V IEC 60947-1 || power circuit 690 V CSA IEC 60947-1 || control circuit 600 V CSA
• Rated Operational Power In W : 12 W 48 V DC-13 10000000 cycles - control circuit || 38 W 48 V DC-13 3000000 cycles - control circuit
• Protective Cover : with
• [Ith] Conventional Free Air Thermal Current : 80 A (at 60 °C) for power circuit || 10 A (at 60 °C) for control circuit
• Control Circuit Voltage Limits : 0.8...1.1 Uc (-40-60 °C):operational AC 50 Hz || 0.85...1.1 Uc (-40-60 °C):operational AC 60 Hz || 1...1.1 Uc (60-70 °C):operational AC 50/60 Hz || 0.75...1.25 Uc (-40-60 °C):operational DC || 0.1...0.3 Uc (-40-70 °C):drop-out DC
• Control Circuit Type : DC standard
• Safety Reliability Level : B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1 || B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1
• Rated Breaking Capacity : 900 A at 440 V for power circuit conforming to IEC 60947
• Irms Rated Making Capacity : 140 A AC for control circuit conforming to IEC 60947-5-1 || 900 A at 440 V for power circuit conforming to IEC 60947 || 250 A DC for control circuit conforming to IEC 60947-5-1
• Associated Fuse Rating : 100 A gG at <= 690 V coordination type 1 for power circuit || 100 A gG at <= 690 V coordination type 2 for power circuit conforming to IEC 60947-5-1 || 10 A gG for control circuit conforming to IEC 60947-5-1
• Time Constant : 34 ms
• Operating Time : 12...26 ms closing || 50 ms closing || 20 ms opening
• Minimum Switching Voltage : 17 V for control circuit
• Tightening Torque : control circuit 1.7 N.m screw clamp terminal Philips No 2 || power circuit 5 N.m screw terminal flat Ø 6 to Ø 8 mm || control circuit 1.7 N.m screw clamp terminal pozidriv No 2 || control circuit 1.7 N.m screw clamp terminal flat Ø 6 mm
• Mechanical Durability : 10000000 cycles
• Compatibility Code : LC1D
• Specifications
• Country of Origin : Czechia
• Width : 85 mm
• Height : 127 mm
• Weight : 2.185 kg
• [Uc] Control Circuit Voltage : 48 V DC
• [Ue] Rated Operational Voltage : power circuit <= 690 V AC 25...400 Hz
• Contactor Application : motor control
• Product Or Component Type : contactor
• Utilisation Category : AC-2 || AC-4 || AC-3 || AC-3e
• [Ie] Rated Operational Current : 80 A (at <60 °C) at <= 440 V AC AC-1 for power circuit || 50 A (at <60 °C) at <= 440 V AC AC-3e for power circuit || 50 A (at <60 °C) at <= 440 V AC AC-3 for power circuit
• Poles Description : 3P
• Range Of Product : TeSys Deca
• Range : TeSys
• Device Short Name : LC1D