This Power Plug-In Relay reflects Schneider Electric expertise in relay since 1924 by helping to reduce the size of enclosures and at the same time increasing machine reliability. It has large choice of number of contacts for high rated current use Its rated current is 15 A, is controlled with a 120 V AC circuit and has a latching of 2 C/O. They are intendedfor industrial machines, packaging, textile, heating, ventilation and air conditioning system.

• Environment
• Product Certifications : CSA || UL || EAC
• Standards : CSA C22.2 No 14 || UL 508 || EN/IEC 61810-1
• Ambient Air Temperature For Operation : -40-55 °C
• Dielectric Strength : 1500 V AC between contacts with micro disconnection || 2000 V AC between coil and contact with reinforced || 2000 V AC between poles with basic
• Vibration Resistance : 3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 5 gn +/- 1 mm 10-150 Hz)5 cycles not operating
• Shock Resistance : 15 gnin operation || 30 gnnot operating
• Ip Degree Of Protection : IP40 conforming to EN/IEC 60529
• Ambient Air Temperature For Storage : -40-85 °C
• Contractual warranty
• Warranty : 18 months
• Offer Sustainability
• Rohs Exemption Information : Yes
• Environmental Disclosure : ENVPEP1406038EN
• Sustainable Offer Status : Green Premium product
• Reach Regulation : Free of Substances of Very High Concern above the threshold
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Reach Free Of Svhc : Yes
• Weee : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• China Rohs Regulation : X
• Circularity Profile : N/A
• Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
• Complementary
• Maximum Switching Capacity : 3750 VA || 420 W
• Safety Reliability Data : B10d = 100000
• Operating Rate : <= 1200 cycles/hour under load || <= 18000 cycles/hour no-load
• Protection Category : RT I
• Test Levels : level A group mounting
• Electrical Durability : 100000 cycles resistive
• Contacts Material : AgNi
• Average Coil Consumption In Va : 1.1 60 Hz
• Shape Of Pin : flat
• Reset Time : 20 ms at nominal voltage
• Net Weight : 0.036 kg
• Maximum Switching Voltage : 250 V IEC
• Average Resistance : 4430 Ohm at 20 °C +/- 15 %
• Device Presentation : complete product
• Rated Operational Voltage Limits : 96...132 V AC
• Pollution Degree : 3
• [Ie] Rated Operational Current : 15 A 277 V AC) UL || 15 A 28 V DC) UL || 15 A 250 V AC) NO IEC || 15 A 28 V DC) NO IEC || 7.5 A 250 V AC) NC IEC || 7.5 A 28 V DC) NC IEC
• [Ui] Rated Insulation Voltage : 250 V IEC || 300 V CSA || 300 V UL
• Mechanical Durability : 10000000 cycles
• Operating Position : any position
• Operating Time : 20 ms at nominal voltage
• Load Current : 15 A 250 V AC || 15 A 28 V DC
• Drop-Out Voltage Threshold : >= 0.15 Uc AC
• [Uimp] Rated Impulse Withstand Voltage : 4 kV 1.2/50 µs
• Minimum Switching Capacity : 170 mW 10 mA, 17 V
• Specifications
• Utilisation Coefficient : 20 %
• [Uc] Control Circuit Voltage : 120 V AC 50/60 Hz
• Range Of Product : Harmony Electromechanical Relays
• Product Or Component Type : plug-in relay
• Status Led : with
• Control Type : without lockable test button
• Series Name : Power
• Contacts Type And Composition : 2 C/O
• Device Short Name : RPM
• [Ithe] Conventional Enclosed Thermal Current : 15 A -40-55 °C