NEMA Motor Starter, Type S, nonreversing, Size 1, 27A, 10 HP at 460 VAC, 5 kA SCCR, 2 phase, 4 pole, melting alloy, 120 VAC coil, open

NEMA Motor Starter, Type S, nonreversing, Size 1, 27A, 10 HP at 460 VAC, 5 kA SCCR, 2 phase, 4 pole, melting alloy, 120 VAC coil, open

SQD8536SCO4V02S 8536SCO4V02S 785901862215
718.37 / EACH
  • Certifications: CSA, NEMA, UL Listed
  • Contact Configuration: Without
  • Depth: 107 mm
  • Height: 172 mm
  • Line Rated Current: 27 A
  • NEMA: 1
  • Number of Phases: 2
  • Warranty Length: 18 mth
  • Width: 115 mm
Type S NEMA motor starters are used for full voltage starting and stopping of AC squirrel cage motors. Type S motor starters have ratings up to 810 amperes. This 4 pole NEMA Size 1 non-reversing starter has a 27 ampere rating. This NEMA Size 1 motor starter has 2 phase ratings of 7.5 HP at 200 and 230 VAC and 10 HP at 460 and 575 VAC. This non-reversing NEMA motor starter has a melting alloy type overload relay that uses Type B thermal units to sense over current conditions. This NEMA starter has a 5 kA maximum SCCR (Short Circuit Current Rating) per UL508A when protected by an appropriate circuit breaker or fuse. Type S motor starters are available with replaceable coils in a wide variety of voltages. This starter has a 110/120 VAC 50/60 Hz operating coil wired for separate control. This NEMA starter is an open device without an enclosure. This starter is 6.77 inches tall, 4.53 inches wide and 4.22 inches deep. A wide variety of accessories are available for Type S starters. Type S non-reversing NEMA motor starters are UL listed and CSA certified.
  • Product Description
  • Specifications
Type S NEMA motor starters are used for full voltage starting and stopping of AC squirrel cage motors. Type S motor starters have ratings up to 810 amperes. This 4 pole NEMA Size 1 non-reversing starter has a 27 ampere rating. This NEMA Size 1 motor starter has 2 phase ratings of 7.5 HP at 200 and 230 VAC and 10 HP at 460 and 575 VAC. This non-reversing NEMA motor starter has a melting alloy type overload relay that uses Type B thermal units to sense over current conditions. This NEMA starter has a 5 kA maximum SCCR (Short Circuit Current Rating) per UL508A when protected by an appropriate circuit breaker or fuse. Type S motor starters are available with replaceable coils in a wide variety of voltages. This starter has a 110/120 VAC 50/60 Hz operating coil wired for separate control. This NEMA starter is an open device without an enclosure. This starter is 6.77 inches tall, 4.53 inches wide and 4.22 inches deep. A wide variety of accessories are available for Type S starters. Type S non-reversing NEMA motor starters are UL listed and CSA certified.
  • Poles Description : 4P
  • Product Certifications : UL Listed || CSA || NEMA
  • [Uc] Control Circuit Voltage : 110 V AC 50 Hz || 120 V AC 60 Hz
  • Line Rated Current : 27 A
  • Rated Power In Hp : 7.5 HP 200 V AC || 7.5 HP 230 V AC || 10 HP 460 V AC || 10 HP 575 V AC
  • Maximum Depth : 107 mm
  • Control Type : no control units
  • Thermal Overload Type : melting alloy 2
  • Nema Size : 1
  • Motor Starter Type : non reversing
  • Auxiliary Contact Composition : without
  • Warranty : 18 months
  • Product Or Component Type : motor starter
  • Range Of Product : S
  • Maximum Height : 172 mm
  • Electrical Connection : screw clamp terminals
  • Nema Degree Of Protection : not rated (open device)
  • Maximum Width : 115 mm
  • [Ue] Rated Operational Voltage : 600 V AC
  • Phase : 2 phases
  • Local Signalling : without pilot light
  • Control Circuit : separate control circuit