Type S NEMA motor starters are used for full voltage starting and stopping of AC squirrel cage motors. Type S motor starters have ratings up to 810 amperes. This 3 pole NEMA Size 1 non-reversing starter has a 27 ampere rating. This NEMA Size 1 motor starter has 3 phase ratings of 7.5 HP at 200 and 230 VAC and 10 HP at 460 and 575 VAC. This non-reversing NEMA motor starter has a melting alloy type overload relay that uses Type B thermal units to sense over current conditions. This NEMA starter has a 5 kA maximum SCCR (Short Circuit Current Rating) per UL508A when protected by an appropriate circuit breaker or fuse. Type S motor starters are available with replaceable coils in a wide variety of voltages. This starter has a 220/240 VAC 50/60 Hz operating coil wired for common control. A painted sheet steel NEMA 12/3R dusttight and driptight industrial use enclosure is used to protect this starter. Enclosure is 12.75 inches tall, 6.38 inches wide and 8.53 inches deep. A wide variety of accessories are available for Type S starters. Type S non-reversing NEMA motor starters are UL listed and CSA certified.
- Environment
- Product Certifications : UL Listed || CSA || NEMA
- Nema Degree Of Protection : NEMA 12 painted sheet steel
- Contractual warranty
- Offer Sustainability
- Pvc Free : Yes
- Reach Regulation : Reference contains Substances of Very High Concern above the threshold
- California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- China Rohs Regulation : Product out of China RoHS scope. Substance declaration for your information.
- Eu Rohs Directive : Not compliant
- Complementary
- Thermal Overload Type : melting alloy 3
- Height : 324 mm
- Auxiliary Contact Composition : without
- Nema Size : 1
- [Uc] Control Circuit Voltage : 220 V AC 50 Hz || 240 V AC 60 Hz
- Rated Power In Hp : 7.5 HP 200 V AC || 7.5 HP 230 V AC || 10 HP 460 V AC || 10 HP 575 V AC
- Control Type : no control units
- Phase : 3 phase
- Local Signalling : without pilot light
- Poles Description : 3P
- Electrical Connection : screw clamp terminals
- Line Rated Current : 27 A
- Control Circuit : common control circuit
- Width : 162 mm
- Depth : 217 mm
- [Ue] Rated Operational Voltage : 600 V AC
- Specifications
- Range Of Product : S
- Product Or Component Type : motor starter
- Motor Starter Type : non reversing