NEMA Starter, Type S, reversing, vertical, Size 1, 27A, 10 HP at 575 VAC, 5 kA SSCR, 2 phase, 4 pole, melting alloy overload, 120 VAC coil, open

NEMA Starter, Type S, reversing, vertical, Size 1, 27A, 10 HP at 575 VAC, 5 kA SSCR, 2 phase, 4 pole, melting alloy overload, 120 VAC coil, open

SQD8736SCO9V02S 8736SCO9V02S 785901571421
1467.57 / EACH
  • Certifications: CSA, UL Listed
  • Contact Configuration: Without
  • Depth: 134.87 mm
  • Height: 292.61 mm
  • Line Rated Current: 27 A
  • NEMA: 1
  • Number of Phases: 2
  • Warranty Length: 18 mth
  • Width: 138.94 mm
Type S NEMA reversing magnetic starters are used for full voltage starting, stopping, and reversing AC squirrel cage motors. NEMA 8736 reversing starters are available in NEMA Sizes 00 to 7 and have ratings up to 810 amperes. NEMA reversing starters consist of two 8502S NEMA contactors that are mechanically and electrically interlocked and an overload relay. Sizes 0-5 reversing starters are available in either horizontal or vertical arrangements. This reversing starter is arranged vertically. This 4 pole NEMA Size 1 reversing starter has an 27 ampere rating. This two phase NEMA Size 1 reversing starter has 7.5 HP at 200 and 230 VAC and 10 HP at 460 and 575 VAC ratings. This reversing NEMA motor starter has a melting alloy type overload relay that uses Type B thermal units to sense over current conditions. This NEMA starter has a 5 kA maximum SCCR (Short Circuit Current Rating) per UL508A when protected by an appropriate circuit breaker or fuse. Type S motor starters are available with replaceable coils in a wide variety of voltages. This starter has a 110/120 VAC 50/60 Hz operating coil wired for separate control. This NEMA reversing starter is an open device without an enclosure. This starter is 11.52 inches tall, 5.47 inches wide and 5.31 inches deep. A wide variety of accessories are available for Type S starters. Type S reversing NEMA motor starters are UL listed and CSA certified.
  • Product Description
  • Specifications
Type S NEMA reversing magnetic starters are used for full voltage starting, stopping, and reversing AC squirrel cage motors. NEMA 8736 reversing starters are available in NEMA Sizes 00 to 7 and have ratings up to 810 amperes. NEMA reversing starters consist of two 8502S NEMA contactors that are mechanically and electrically interlocked and an overload relay. Sizes 0-5 reversing starters are available in either horizontal or vertical arrangements. This reversing starter is arranged vertically. This 4 pole NEMA Size 1 reversing starter has an 27 ampere rating. This two phase NEMA Size 1 reversing starter has 7.5 HP at 200 and 230 VAC and 10 HP at 460 and 575 VAC ratings. This reversing NEMA motor starter has a melting alloy type overload relay that uses Type B thermal units to sense over current conditions. This NEMA starter has a 5 kA maximum SCCR (Short Circuit Current Rating) per UL508A when protected by an appropriate circuit breaker or fuse. Type S motor starters are available with replaceable coils in a wide variety of voltages. This starter has a 110/120 VAC 50/60 Hz operating coil wired for separate control. This NEMA reversing starter is an open device without an enclosure. This starter is 11.52 inches tall, 5.47 inches wide and 5.31 inches deep. A wide variety of accessories are available for Type S starters. Type S reversing NEMA motor starters are UL listed and CSA certified.
  • Maximum Height : 292.61 mm
  • [Uc] Control Circuit Voltage : 110 V AC 50 Hz || 120 V AC 60 Hz
  • Poles Description : 4P
  • Electrical Connection : screw clamp terminals
  • Line Rated Current : 27 A
  • Nema Size : 1
  • Product Or Component Type : starter
  • Auxiliary Contact Composition : without
  • Wiring Mode : 2 wires
  • Control Circuit : separate control circuit
  • Nema Degree Of Protection : not rated (open device)
  • Range Of Product : S
  • Warranty : 18 months
  • Motor Starter Type : reversing
  • [Ue] Rated Operational Voltage : 600 V AC
  • Rated Power In Hp : 7.5 HP 200 V AC || 7.5 HP 230 V AC || 10 HP 460 V AC || 10 HP 575 V AC
  • Thermal Overload Type : melting alloy 2
  • Maximum Depth : 134.87 mm
  • Local Signalling : without pilot light
  • Installation Direction : vertical
  • Maximum Width : 138.94 mm
  • Phase : 2 phases
  • Product Certifications : UL Listed || CSA
  • Control Units : no control units