SQUARE D

motion servo drive, Lexium 28, single and three phase, 200 to 240V, 50W

Lexium28 IO and CAN drive - 50

SQDLXM28AUA5M3X LXM28AUA5M3X 3606480711756
847.21 / EA
http://schema.org/OutOfStock
  • Connection Type: RJ45 CN4)CANopen, CANmotion
  • Country of Origin: USA
  • Depth: 146 mm
  • Height: 150 mm
  • Net Weight: 1 kg
  • Operating Position: Vertical
  • Weight: 1 kg
  • Width: 55 mm
QTY
  • Features
  • Specifications
  • Prop 65
    • WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • Complementary
    • [Us] Rated Supply Voltage : 200...240 V - 10...15 %)three phase || 200...240 V - 20...15 %)single phase
    • Network Frequency : 47.5...63 Hz
    • Type Of Cable : shielded motor cable 0-55 °C) copper
    • Absolute Accuracy Error : 0.1 %
    • Discrete Input Logic : positive or negative CN1)
    • Continuous Output Current 2 : 0.64 A
    • Continuous Output Current 3 : 0.64 A
    • Height : 150 mm
    • Electrical Isolation : between power and control
    • Output Current 3S Peak : 2 A 220 V
    • Physical Interface : RS485 Modbus Serial line slave
    • Product Compatibility : servo motor BCH2 40 mm, 1 50 W
    • Status Led : 1 LED (Red) charge || 1 LED (Green) RUN || 1 LED (Red) error
    • Discrete Output Number : 5 logic output CN1)12...24 V DC || 1 pulse train output (PTO) CN1)
    • Discrete Input Voltage : 24 V DC logic
    • Transmission Rate : 250 kbit/s 100-250 m CANopen, CANmotion || 500 kbit/s 4-100 m CANopen, CANmotion || 1 Mbit/s 4-4 m CANopen, CANmotion
    • Discrete Output Voltage : 12...24 V DC
    • Discrete Input Number : 8 programmable CN1) || 1 pulse train input (PTI) CN1) || 2 fast capture CN1) || 1 safety function STO CN9)
    • Signalling Function : servo status and fault codes five 7-segment display units
    • Marking : CE || CSA || cULus
    • Output Current 3S Peak 2 : 2 A 220 V
    • Connector Type : RJ45 CN4)CANopen, CANmotion
    • Phase : single phase || three phase
    • Net Weight : 1 kg
    • Output Current 3S Peak 3 : 2 A 220 V
    • Communication Interface : CANopen, Integrated || CANmotion, Integrated
    • Electrical Connection : spring terminal 0.82...1 mm², AWG 18 L1-L2) || spring terminal 0.82...1 mm², AWG 18 R, S, T) || spring terminal 0.82...1 mm², AWG 18 U, V, W, PE) || spring terminal 0.82...1 mm², AWG 18 PA/+, PBe)
    • Analogue Input Number : 2
    • Switching Frequency : 16 kHz
    • Supply Voltage Description : single phase 220 V AC 50...60 Hz || three phase 220 V AC 50...60 Hz
    • Discrete Output Logic : positive or negative CN1)
    • Type Of Cooling : natural convection
    • Communication Iinterface : pulse train output || CANopen DS402 || CANmotion || pulse train input
    • Emc Filter Compatibility : type 020 || type 022
    • Supply Voltage Limits : 200-255 V three phase || 170-255 V single phase
    • Method Of Access : slave
    • Control Signal Type : servo motor encoder feedback CN2
    • Field Weakening : false
    • Safety Function : STO (safe torque off), Integrated
    • Number Of Addresses : 1-127 CANopen, CANmotion
    • Output Voltage : <= power supply voltage
    • Operating Position : vertical
    • Emc Filter : without EMC filter
    • Maximum Leakage Current : 1.3 mA
    • Width : 55 mm
    • Overvoltage Category : III
    • Depth : 146 mm
    • Nominal Power : 0.05 kW 220 V 16 kHz
    • Continuous Output Current : 0.64 A 16 kHz
    • Switching Frequency 2 : 16 kHz
    • Protection Type : against reverse polarity inputs signal || against short-circuits outputs signal || overcurrent motor || overvoltage motor || undervoltage motor || overheating motor || overload motor || overspeed motor
    • Switching Frequency 3 : 16 kHz
    • Network Number Of Phases : 1 || 3
    • Analogue Input Type : V_REF voltage analog input - 10...10 V 10 kOhm 14 bits || T_REF voltage analog input
    • Continuous Power : 50 W 220 V
    • Drive Voltage Drop Coefficient : 1
    • Supply Frequency : 50/60 Hz - 5...5 %
    • Safety Level : SIL 2 IEC 61800-5-2 2007 || SIL 2 IEC 61508-1 2010 || PL d/category 3 ISO 13849-1 2008 || SIL 2 ISO 13849-1 2009/AC || SIL 2 IEC 60204-1 2006 || SIL 2 IEC 60204-1 2009/A1 || SIL 2 IEC 60204-1 2010/AC || SIL 2 IEC 62061 2012
  • Environmental data
    • Packaging Made With Recycled Cardboard : No
    • Environmental Disclosure : ENVPEP1409001EN
    • Packaging Without Single Use Plastic : No
    • California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    • Minimum Percentage Of Recycled Plastic Content : 0
    • Circularity Profile : ENVEOLI1409001EN
    • Take-Back : No
    • Pvc Free : Yes
    • Carbon Footprint (Kg Co2 Eq, Total Life Cycle) : 253.3783449864
  • Environment
    • Product Certifications : CSA || CE || cULus
    • Ambient Air Temperature For Operation : 0-55 °C
    • Standards : IEC 61800-5-1
    • Electromagnetic Compatibility : conducted emission - test level: level 3 category C3 conforming to IEC 61800-3
    • Vibration Resistance : 3M4 3 mm 9-200 Hz)IEC 60721-3-3
    • Shock Resistance : 10 gn, type I IEC 60721-3-3
    • Ambient Air Temperature For Storage : -25-65 °C
    • Relative Humidity : 5-95 % without condensation
    • Ip Degree Of Protection : IP20
    • Operating Altitude : <= 3280.84 ft (1000 m) without derating || > 3280.84...6561.68 ft (> 1000...2000 m) 1 % per 100 m
  • Specifications
    • Country of Origin : United States
    • Width : 55 mm
    • Height : 150 mm
    • Weight : 1 kg
    • Line Current : 0.8 A 262.8 % 220 V, single phase || 0.8 A 227 % 220 V, three phase
    • Range Of Product : Lexium 28
    • Format Of The Drive : compact housing
    • Product Or Component Type : motion servo drive
    • Device Short Name : LXM28A