This Harmony RM35-T control relay allows monitoring of motor voltage and temperature control. This modular control relay is ideal for monitoring of electrical values with voltage and temperature variation in control of moving equipment's. It applies to a wide type of industrial automation applications such as hoisting, packaging, lifts, textile, water. It has one of market medium form-factors with 35mm width, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 3-pole DIN device. It also offers a selectable memory function, integral LED for indicating control status, sealable cover, with simple and precise settings with screw trimmers. It provides automatic shutdown management and fault information to user for a quick fault identification and troubleshooting. Multi function controller for wide choice selected in hard-wired logic automated systems, ideal for refurbishment of old installations without using a PLC. 0 0 0 0 0 0 0 0 0 0 0 0

• Prop 65
• WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

• Complementary Attributes
• Maximum Resistance : 1500 Ohm temperature sensor 20 °C
• Maximum Switching Current : 5 A AC, 5 A DC
• Maximum Switching Voltage : 250 V AC, 250 V DC
• Minimum Switching Current : 10 mA 5 V DC
• Uc Control Circuit Voltage : <= 3.6 V temperature control circuit T1-T2 terminals open), <= 3.6 V temperature control circuit T1-T2 terminals open), <= 3.6 V temperature control circuit T1-T2 terminals open), <= 3.6 V temperature control circuit T1-T2 terminals open), <= 3.6 V temperature control circuit T1-T2 terminals open), <= 3.6 V temperature control circuit T1-T2 terminals open), 24...240 V
• Ui Rated Insulation Voltage : 400 V IEC 60664-1
• Us Rated Supply Voltage : 24...240 V AC/DC 50/60 Hz, non self-powered
• Control Circuit Frequency : 50...60 Hz +/- 10 %
• Line Rated Current : 5 A
• Maximum Power Consumption In W : 0.5 W DC
• Important Information Attributes
• Persona Type Ids : BM9, EU, LC, OM, OM8, PB, SC, SI, VR
• Persona Type Names : Charge Point Operator, End User, Contractor, Original Equipment Manufacturer, OEM - Control Panelbuilder, Panel Builder, Electrician, System Integrator, IT Channel Partner
• Market Segmentation Id : COMMERCIAL, INDUSTRIAL
• Market Segmentation : Commercial, Industrial
• Dielectric Test Voltage : 2 kV AC 50 Hz, 1 min
• Electromagnetic Compatibility : emission standard for industrial environments conforming to IEC 61000-6-4, emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3, immunity for industrial environments conforming to IEC 61000-6-2
• Immunity To Microbreaks : 20 ms 20.4 V
• Insulation Resistance : > 500 MOhm 500 V DC between supply and relay output IEC 60255-5, > 500 MOhm 500 V DC between supply and relay output IEC 60255-5, > 500 MOhm 500 V DC between supply and relay output IEC 60255-5, > 500 MOhm 500 V DC between supply and relay output IEC 60255-5, > 500 MOhm 500 V DC between supply and relay output IEC 60255-5, > 500 MOhm 500 V DC between measurement and relay output IEC 60664-1, > 500 MOhm 500 V DC between measurement and relay output IEC 60664-1, > 500 MOhm 500 V DC between measurement and relay output IEC 60664-1, > 500 MOhm 500 V DC between measurement and relay output IEC 60664-1, > 500 MOhm 500 V DC between measurement and relay output IEC 60664-1, > 1 MOhm 500 V DC between supply and measurement IEC 60255-5, > 1 MOhm 500 V DC between supply and measurement IEC 60255-5, > 1 MOhm 500 V DC between supply and measurement IEC 60255-5, > 1 MOhm 500 V DC between supply and measurement IEC 60255-5, > 1 MOhm 500 V DC between supply and measurement IEC 60255-5, > 500 MOhm 500 V DC between supply and relay output IEC 60664-1, > 500 MOhm 500 V DC between supply and relay output IEC 60664-1, > 500 MOhm 500 V DC between supply and relay output IEC 60664-1, > 500 MOhm 500 V DC between supply and relay output IEC 60664-1, > 500 MOhm 500 V DC between supply and relay output IEC 60664-1, > 500 MOhm 500 V DC between measurement and relay output IEC 60255-5, > 500 MOhm 500 V DC between measurement and relay output IEC 60255-5, > 500 MOhm 500 V DC between measurement and relay output IEC 60255-5, > 500 MOhm 500 V DC between measurement and relay output IEC 60255-5, > 500 MOhm 500 V DC between measurement and relay output IEC 60255-5, > 1 MOhm 500 V DC between supply and measurement IEC 60664-1, > 1 MOhm 500 V DC between supply and measurement IEC 60664-1, > 1 MOhm 500 V DC between supply and measurement IEC 60664-1, > 1 MOhm 500 V DC between supply and measurement IEC 60664-1, > 1 MOhm 500 V DC between supply and measurement IEC 60664-1> 500 MOhm 500 V DC between supply and relay output IEC 60255-5, > 500 MOhm 500 V DC between supply and relay output IEC 60255-5, > 500 MOhm 500 V DC between supply and relay output IEC 60255-5, > 500 MOhm 500 V DC between supply and relay output IEC 60255-5, > 500 MOhm 500 V DC between supply and relay output IEC 60255-5, > 500 MOhm 500 V DC between measurement and relay output IEC 60664-1, > 500 MOhm 500 V DC between measurement and relay output IEC 60664-1, > 1 MOhm 500 V DC between supply and measurement IEC 60255-5, > 1 MOhm 500 V DC between supply and measurement IEC 60255-5
• Local Signalling : LED (green) for power ON, LED (yellow) for phase of relay (R2), LED (yellow) for temperature of relay (R1)
• Measurement Range : 208...480 V AC, 15...3100 Ohm
• Mounting Support : 35 mm symmetrical DIN rail conforming to IEC 60715
• Non Dissipating Shock Wave : 4 kV
• Operating Position : any position without derating
• Operating Rate : <= 360 operations/hour full load, <= 360 operations/hour full load<= 360 operations/hour full load, <= 360 operations/hour full load
• Overvoltage Category : III conforming to IEC 60664-1
• Power Consumption In Va : 0-4 VA 24...240 V AC
• Relay Monitored Parameters : phase sequence, motor temperature via PTC probe, phase failure detection
• Reset Time : 10000 ms output
• Response Time : > 50 ms (input Y1 (contact Y1-T1) and push-button), > 50 ms (input Y1 (contact Y1-T1) and push-button)> 50 ms (input Y1 (contact Y1-T1) and push-button), > 50 ms (input Y1 (contact Y1-T1) and push-button)
• Shock Resistance : 15 gn 11 ms IEC 60255-21-1
• Short Circuit Current : 0.007 A temperature sensing circuit T1-T2 terminals short circuited)
• Supply Voltage Limits : 20.4-264 V AC, 20.4-264 V DC
• Tightening Torque : 0.6-1 N.m IEC 60947-1
• Time Delay Type : without
• Utilisation Category : AC-12 IEC 60947-5-1, AC-13 IEC 60947-5-1, AC-14 IEC 60947-5-1, AC-15 IEC 60947-5-1, DC-12 IEC 60947-5-1, DC-13 IEC 60947-5-1
• Vibration Resistance : 0.35 mm (f= 5-57.6 Hz) conforming to IEC 60068-2-6, 1 gn (f= 57.6-150 Hz) conforming to IEC 60255-21-1
• Voltage Range : 176...528 V
• Connections Terminals : screw terminals, 1 x 0.5...1 x 4 mm² AWG 20...AWG 11) solid without cable end, screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end, screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 12) flexible with cable end, screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) flexible with cable end, screw connectors
• Carbon Footprint Of The Distribution Phase A4 : 0.01713040285049447, 0 kg CO2 eq.
• Carbon Footprint Of The End Of Life Phase C1 To C4 : 0.2 kg CO2 eq., 0.245929828388598
• Carbon Footprint Of The Installation Phase A5 : 0.042505461023851075, 0 kg CO2 eq.
• Carbon Footprint Of The Manufacturing Phase A1 To A3 : 9 kg CO2 eq., 8.821162012798137
• Carbon Footprint Of The Use Phase B2 B3 B4 B6 : 20 kg CO2 eq., 20.104799999999997
• Certificate Agency : GL, UL, GOST, C-tick, CSA
• Local Data Status : Publishable
• Local Publishable Date : 2026-03-26
• Return Indicator : Y
• Stocking Flag : N
• Stock Policy : 2
• Weee Scope : Out
• Weee Product Category : 5
• Scope Perimeter : At least in Europe
• Eoli Availability Display : Yes
• End Of Life Doc Ref : ENVEOLI1601004EN
• Reach Full Compliance Status : Reference contains Substances of Very High Concern above the threshold
• Reach Full Compliance Status Id : CONTAINS_SVHC
• Reach Compliance Directive : Reference contains Substances of Very High Concern above the threshold
• Rohs Eur In Scope : No
• Rohs Eur Status : Compliant By Exemption
• Rohs Eur Conformity Date : 1918
• Rohs Eur Full Compliance Status : Compliant By Exemption
• China Rohs In Scope : Yes
• China Rohs Label : 5
• With Recycled Cardboard : Yes
• Without Single Use Plastic : Yes
• Product Contributes To Saved And Avoided Emissions : No
• Tier Id : 1
• Tier : 1
• Function Option Id : STANDARD
• Function Option : Standard
• Product Kit Identifier : N
• Compatibility Code : RM3
• Contacts Type And Composition : 2 NO
• Control Type : without test button
• Electrical Durability : 10000 cycles
• Housing Material : polycarbonate
• Marking : CE
• Measurement Voltage Limits : 176-528 V AC
• Mechanical Durability : 30000000 cycles
• Product Availability : Stock - Normally stocked in distribution facility
• Product Or Component Type : motor temperature control relay
• Product Specific Application : for 3-phase supply
• Range Of Product : Harmony Control Relays
• Relay Name : RM35TM
• Relay Type : motor temperature control relay
• Reset Threshold : 1650 Ohm +/- 10 % temperature control circuit
• Resistance Across Terminals : 602 mOhm
• Returnability : Yes
• Run Up Delay At Power Up : 500 ms
• Software Version : v5.9.4
• Supply Frequency : 50/60 Hz +/- 10 %
• Sustainable Packaging : Yes
• Switching Capacity In Va : 1250 VA
• Total Lifecycle Carbon Footprint : 29 kg CO2 eq.
• Tripping Threshold : 3100 Ohm +/- 10 % temperature control circuit
• Warranty In Months : 18
• Pep Code : ENVPEP1601004EN
• Database Version : 2022-01
• Pep Verification Date : 2025-02-23
• Pcr Version : PEP-PCR-ed4-2021 09 06
• Psr Version : PSR-0005-ed2-2016 03 29
• Type Of Verification For The Pep : Independent internal review
• Data Source : extrapolated product
• Functional-unit Description : RM35 relay used to measure and monitor the abnormal operating& 10conditions such as on current, voltage, frequency, phase, speed, temperature and liquid level that the machine will not be allowed to run when a fault is occurred. It allows the user to initiate the necessary corrective actions before serious and costly breakdowns can occur.This product will be in 80% active mode with power consumption of 1W during 10 years of lifetime, adhering to IEC 60255-1 standard.
• Functional-unit Quantity : 1
• Functional-unit Unit : Unit
• Reference Lifetime, In Y : 10
• Energy Model - Manufacturing [A1-a3] : Electricity Mix; Production mix; Low voltage; ID
• Energy Model - Installation [A5] : Electricity Mix; Production mix; Low voltage; UE-27
• Energy Model - Use [B6] : Electricity Mix; Production mix; Low voltage; UE-27
• Energy Model - End Of Life [C1-c4] : Electricity Mix; Production mix; Low voltage; UE-27
• Offer Owner Code : 190786
• Pn : 1
• Width Nominal : 35 mm
• Environment Attributes Main
• Ambient Air Temperature For Storage : -40-70 °C, -40-70 °C
• Directives : 73/23/EEC - low voltage directive, 89/336/EEC - electromagnetic compatibility
• Ip Degree Of Protection : IP20 IEC 60529 terminals), IP30 IEC 60529 casing)
• Relative Humidity : 95-95 % 55-55 °C IEC 60068-2-30
• Take Back : No
• Recycled Metal Content At Cr Level : 0 %
• China Rohs Regulation : X
• Mercury Free : Yes
• Carbon Footprint : 29.231527705061076
• Ambient Air Temperature For Operation : -20-50 °C-20-50 °C
• Circularity Profile : ENVEOLI1601004EN
• Environmental Disclosure : ENVPEP1601004EN
• Eu Rohs Directive : Compliant By Exemption
• Packaging Made With Recycled Cardboard : Yes
• Packaging Without Single Use Plastic : Yes
• Reach Regulation : Reference contains Substances of Very High Concern above the threshold
• Pep Code : ENVPEP1601004EN
• Pep Verification Date : 2025-02-23
• Pcr Version : PEP-PCR-ed4-2021 09 06
• Psr Version : PSR-0005-ed2-2016 03 29
• Type Of Verification For The Pep : Independent internal review
• General Attributes
• Product Or Component Type : motor temperature control relay
• Range Of Product : Harmony Control Relays
• ETIM
• ETIM 8 : EC001446
• ETIM 9 : EC001446
• Output Attributes
• Nominal Output Current : 5 A
• Output Contacts : 2 NO
• Contractual Warranty Attributes
• Warranty Period : 18 months
• Warranty : 18 months
• Specifications
• Country of Origin : Brazil, France, Indonesia, United States