Square D™ load center surge protective devices, SDSA1175FE, are easy to install plug-in units that install as quickly as a standard circuit breaker. The surge suppressors use two pole spaces in a QO™ or Homeline™ load center, or NQ panelboard. US and Canadian UL® Listed as Type 2 SPD to the UL 1449 standard. Complies with requirements of NEC® Article 285, CSA 233.1-87, and CSA C22.2 No. 8- M1986 as appropriate.

• Prop 65
• "WARNING: This product can expose you to chemicals including: Nickel (Metallic), which is known to the State of California to cause cancer, and Toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov"

• Environment
• Product Certifications : UL Listed
• Nema Degree Of Protection : NEMA 3R
• Contractual warranty
• Warranty : 18 months
• Environmental data
• Packaging Made With Recycled Cardboard : No
• Packaging Without Single Use Plastic : No
• California Proposition 65 : "WARNING: This product can expose you to chemicals including: Nickel (Metallic), which is known to the State of California to cause cancer, and Toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov"
• Take-Back : No
• Eu Rohs Directive : Under investigation
• Complementary
• Service Feed Location : OH
• Height : 14.00 in
• Meter Socket Rated Current : 200 A
• [Ue] Rated Operational Voltage : 600 V AC
• Bypass Type : no bypass
• Electrical Connection : lugs 0.5" hex
• Phase : 1 phase
• Enclosure Material : steel
• Wiring Configuration : 3-wire
• Width : 8.00 in
• Depth : 4.38 in
• Number Of Jaws : 4 without jaw release
• Box Number : 3R
• Specifications
• Country of Origin : United States
• Width : 8.00 in
• Height : 14.00 in
• Product Or Component Type : Meter Socket
• Hub Type : A ACP closing plate
• Meter Socket Type : ringless