integrated drive ILA with servo motor - 24..36 V - CANopen - PCB connector

Intg. servo CAN. 24-36V multi.

SQDILA1F572PB2A0 ILA1F572PB2A0 3389119225526
2336.81 / EA
http://schema.org/OutOfStock
Mayer-DDS-integrated drive ILA with servo motor - 24..36 V - CANopen - PCB connector-1
  • Motor Type: AC Synchronous Servo Motor
  • Shaft Diameter: 9 mm
  • Shaft End: Untapped
  • Shaft Length: 20 mm
  • Warranty Length: 18 mth
This product is part of the Lexium ILA, ILE, ILS range, an offer of integrated drives for motion control. This is an integrated drive with an AC synchronous servo motor without gearbox, without holding brake. The feedback is given by a multi-turn encoder. Its nominal speed is 2600rpm at 24VDC, 4300rpm at 36VDC. Its nominal torque is 0.45Nm. It embeds 4 signals which can be used as input or output. This integrated drive consists of control electronics with a communication interface for CANopen DS301 bus, and an AC synchronous servo motor. Its transmission rates are 50, 100, 125, 250, 500, 800 and 1000kbauds. The electrical connection is made on a printed circuit board connector. Its motor flange size is 57mm. It installs with 4x 5.2mm mounting holes. The circle diameter of the mounting holes is 66.6mm. It weighs 1.7kg. It integrates a CANopen DS301 interface. This product is certified by cUL, TÜV and UL. It is compatible with pre-assembled cables for CANopen interface and power supply. Those mounting positions are allowed per IEC 60034-7 as IM B5 shaft horizontal, IM V1 shaft vertical, shaft end down, IM V3 shaft vertical, shaft end up. Lexium-integrated drives are used to create decentralized motion control solutions in very compact units. integrated Drives for motion control with stepper, servo or brushless DC motor.
QTY
  • Features
  • Specifications
  • Features
    • STO safety function prevents unintended machine starts as per IEC/EN 61800-5-2 for operator safety
    • 25% reduction in installation time with Lexium commissioning tool
    • Everything integrated into a single and compact device reducing control cabinet space
    • Smart monitoring and control on CANopen bus
    • Compact design with 40% decrease in wiring
  • Prop 65
    • WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • Communications & Management Attributes
    • Communication Interface : CANopen DS301, Integrated
  • Physical Attributes
    • Motor Flange Size : 57 mm
    • Shaft Length : 20 mm
  • Conformance Attributes
    • Product Certifications : UL, TÜV, cUL
    • Standards : IEC 50347, EN 61800-3 : 2001-02, IEC 61800-3, IEC 61800-3, Ed 2, IEC 50178, EN 61800-3:2001, second environment, IEC 60072-1
  • Complementary Attributes
    • Maximum Axial Force FA : 104 N force pressure), 104 N tensile force)
    • Maximum Switching Current : 100 mA per output, 200 mA total
    • Maximum Radial Force FR : 107 N
  • Important Information Attributes
    • Coefficient 1 1 : -0.001570167 N.m/rpm, -0.001570167 N.m/rpm
    • Coefficient 1 3 : -2.4503311E-11 N.m/rpm3, -2.4503311E-11 N.m/rpm3
    • Coefficient 2 1 : -0.000559 N.m/rpm, -0.000559 N.m/rpm
    • Coefficient 2 3 : -2.69719471E-12 N.m/rpm3, -2.69719471E-12 N.m/rpm3
    • Current Consumption : 7000 mA maximum continuous, 8500 mA peak
    • Nominal Speed : 2600 rpm 24 V, 4300 rpm 36 V
    • Protection Type : short circuit of the output voltage, overload of output voltage, safe torque off
    • Supply Voltage Description : single phase 36 V DC, single phase 24 V DC
    • Us Rated Supply Voltage2 : 36 V, 24 V
    • Carbon Footprint Of The Distribution Phase A4 : 0.4421131478, 0.4 kg CO2 eq.
    • Carbon Footprint Of The End Of Life Phase C1 To C4 : 0.5 kg CO2 eq., 0.4506897478
    • Carbon Footprint Of The Installation Phase A5 : 0.0264473722, 0 kg CO2 eq.
    • Carbon Footprint Of The Manufacturing Phase A1 To A3 : 29 kg CO2 eq., 28.5265173913
    • Carbon Footprint Of The Use Phase B2 B3 B4 B6 : 446 kg CO2 eq., 446.3584732824
    • Local Data Status : Publishable
    • Local Publishable Date : 2026-01-12
    • Device Type : Motion - integrated drive
    • Serviceability : Yes
    • Traceability : Yes
    • Field Service Division : IDIBS
    • Average Life Duration : 15 year(s)
    • Legacy WEEE Scope : In
    • Scope Perimeter : At least in Europe
    • EOLI Availability Display : Yes
    • End Of Life Doc Ref : ENVEOLI2011004EN
    • Reach Full Compliance Status : Reference contains Substances of Very High Concern above the threshold
    • Reach Full Compliance Status Id : CONTAINS_SVHC
    • Reach Compliance Directive : Reference contains Substances of Very High Concern above the threshold
    • ROHS EUR In Scope : No
    • ROHS EUR Status : Compliant with Exemptions
    • ROHS EUR Full Compliance Status : Pro-active compliance (Product out of EU RoHS legal scope)
    • ROHS EUR Full Compliance Status Id : PRO_ACTIVE_COMPLIANCE
    • China ROHS In Scope : Yes
    • With Recycled Cardboard : Yes
    • Without Single Use Plastic : No
    • Product Contributes To Saved And Avoided Emissions : No
    • Return Indicator : N
    • Associated Fuse Rating : 10 A
    • Centring Collar Diameter : 50 mm
    • Circle Diameter Of The Mounting Holes : 66.6 mm
    • Coefficient 1 0 : 2.7616526 N.m
    • Coefficient 1 2 : 3.21136E-07 N.m/rpm²
    • Coefficient 2 0 : 2.02364193 N.m
    • Coefficient 2 2 : 5.425111E-08 N.m/rpm²
    • Coefficient M0 : 9.3023265E-06 N.m/rpm
    • Coefficient M0 Max : 6.25E-06 N.m/rpm
    • Compatibility Code : ILA
    • Continuous Stall Torque : 0.45 N.m
    • Curve Type : lin
    • Device Short Name : ILA
    • Electrical Connection : printed circuit board connector
    • Feedback Type : multi turn encoder
    • Gear Box Type : without
    • Holding Brake : without
    • Marking : CE
    • Motor Type : AC Synchronous Servo Motor
    • Mounting Holes Diameter : 5.2 mm
    • Mounting Support : flange
    • Network Type : DC
    • Nominal Torque : 0.45 N.m
    • Package Weight Lbs : 2.320 kg
    • Peak Stall Torque : 0.72 N.m
    • Phase : single phase
    • Product Availability : Non-Stock - Not normally stocked in distribution facility
    • Product Or Component Type : motion integrated drive
    • Range Of Product : Lexium integrated drive
    • Returnability : No
    • Rotor Inertia : 0.18 kg.cm²
    • Second Shaft : without second shaft end
    • Service Life In Hours : 20000 h bearing
    • Shaft Diameter : 9 mm
    • Shaft End : untapped
    • Shock Resistance : 150 m/s² 1000 shocks IEC 60068-2-29
    • Sizing Reference : ILA1_572P
    • Speed Feedback Resolution : 16384 points/turn x 4096 turns
    • Supply Voltage Limits : 18-40 V
    • Sustainable Packaging : No
    • Total Lifecycle Carbon Footprint : 476 kg CO2 eq.
    • Transmission Rate : 50, 100, 125, 250, 500, 800 and 1000 kbauds
    • Type Of Cooling : natural convection
    • Vibration Resistance : 20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
    • Voltage 1 : 24 V
    • Voltage 1 Speed 1 : 2583.62 rpm
    • Voltage 1 Speed 1 Max : 2004.079 rpm
    • Voltage 2 : 36 V
    • Voltage 2 Speed 2 : 4293.17 rpm
    • Voltage 2 Speed 2 Max : 3206.42 rpm
    • Voltage State 0 Guaranteed : -3...4.5 V
    • Voltage State 1 Guaranteed : 15...30 V
    • Weee Label : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    • Winding Type : medium speed of rotation and medium torque
    • Accuracy Error Angular2 : 0.05 °
    • Medium Desc : integrated drive ILA with servo motor - 24..36 V - CANopen - PCB connector
    • Stocking Flag : Y
    • Product Kit Identifier : N
    • Accuracy Error Angular3 : 0.05 °
    • Pep Code : ENVPEP2011004EN
    • Database Version : 2016-11
    • Pep Verification Date : 2020-11-01
    • Pcr Version : PCR-ed3-EN-2015 04 02
    • Type Of Verification For The Pep : Independent internal review
    • Data Source : extrapolated product
    • Functional Unit Description : To coordinate and synchronize motion control with stepper, servo or burshless DC motor 70% of the time for 10 years
    • Functional Unit Unit : unit
    • Energy Model Manufacturing A1 A3 2 : Energy model used: Germany
    • Energy Model Installation A5 2 : Electricity mix; AC; < 1kV; EU-27
    • Energy Model Use B6 2 : Electricity mix; AC; < 1kV; EU-27
    • Energy Model End Of Life C1 C4 2 : Electricity mix; AC; < 1kV; EU-27
    • Global Commercial Status : Commercialised
  • Environment Attributes Main
    • Take Back : No, Nej
    • Ambient Air Temperature For Operation : 50-65 °C (with power derating of 2 % per °C), 0-50 °C (without derating)
    • EU ROHS Directive : Compliant By Exemption , Pro-active compliance (Product out of EU RoHS legal scope)
    • IP Degree Of Protection : IP41 shaft bushing: conforming to IEC 60034-5, IP54 total except shaft bushing: conforming to IEC 60034-5
    • Operating Altitude : <= 3280.84 ft (1000 m) without derating, <= 3280.84 ft (1000 m) without derating, <= 3280.84 ft (1000 m) without derating, <= 3280.84 ft (1000 m) without derating
    • Permissible Ambient Air Temperature Around The Device : 105 °C power amplifier, 110 °C motor
    • ROHS Exemption Information : Yes
    • Recycled Metal Content At Cr Level : 0 %
    • China ROHS Regulation : X
    • Mercury Free : Yes
    • Carbon Footprint : 475.8042409416
    • Ambient Air Temperature For Storage : -25-70 °C
    • Circularity Profile : ENVEOLI2011004EN
    • Environmental Disclosure : ENVPEP2011004EN
    • Packaging Made With Recycled Cardboard : Yes
    • Packaging Without Single Use Plastic : No
    • Reach Regulation : Reference contains Substances of Very High Concern above the threshold
    • Relative Humidity : 15-85 % without condensation
    • Pep Code : ENVPEP2011004EN
    • Pep Verification Date : 2020-11-01
    • Pcr Version : PCR-ed3-EN-2015 04 02
    • Type Of Verification For The Pep : Independent internal review
  • General Attributes
    • Phase : single phase
    • Product Or Component Type : motion integrated drive
    • Range Of Product : Lexium integrated drive
  • Output Attributes
    • Discrete Output Voltage : 23...25 V
  • Contractual Warranty Attributes
    • Warranty Period : 18 months
    • Warranty : 18 months
  • Input Attributes
    • Discrete Input Current : 10-10 mA at 24 V on/STO_A safety input, 3-3 mA at 24 V on/STO_B safety input, 2-2 mA at 24 V 24 V signal interface
    • Input Output Type : 4 signals (each be used as input or output)