SQUARE D

Inductive proximity sensors XS, inductive sensor XS7 15x32x8, PBT, Sn5mm, 12...24 VDC, M8 0.15 m

INDUCTIVE PROXIMITY SENSORS XS

SQDXS7F1A1NAL01M8 XS7F1A1NAL01M8 3389110139877
109.00 / EA
http://schema.org/OutOfStock
  • Cable Length: 0.15 m
  • Certifications: CSA, C-tick, UL
  • Current: 10 mA
  • Depth: 8 mm
  • Enclosure Material: PBT
  • Height: 32 mm
  • Material: Plastic
  • Net Weight: 0.045 kg
  • Warranty Length: 18 mth
  • Width: 15 mm
QTY
  • Product Description
  • Specifications
This XS flat (15 x 32 x 8 mm) inductive proximity sensor has a PBT case. It has a supply voltage of 12V to 24V DC. This general purpose rectangular inductive proximity sensor is mountable directly on a surface, thanks to its 2 screw fixing points. It provides mechanical resistance and chemical withstand thanks to PBT case. It has a yellow LED for output status indication for easier sensor setup and troubleshooting. IP67 protection makes this product ready for the harshest environments. It can operate in very cold (-25°C) and hot environments (+70°C). It has a standard M8 connector, compatible with all existing market sensor cabling. It is C-Tick, CSA, UL certified.
  • Specifications
    • Electrical Connection : remote male connector M8, 3 pins
    • [Us] Rated Supply Voltage : 12...24 V DC reverse polarity protection
    • Discrete Output Type : NPN
    • Discrete Output Function : 1 NO
    • Type Of Output Signal : discrete
    • Range Of Product : Telemecanique Inductive proximity sensors XS
    • Cable Length : 0.15 m
    • Sensor Name : XS7
    • Material : plastic
    • Size : 8 mm
    • Wiring Technique : 3-wire
    • Ip Degree Of Protection : IP68 conforming to IEC 60529
    • Series Name : general purpose
    • Body Type : fixed
    • Sensor Type : inductive proximity sensor
    • Detector Flush Mounting Acceptance : flush mountable
    • Switching Capacity In Ma : <= 100 mA DC overload and short-circuit protection
    • Sensor Design : flat form 15 x 32 x 8
    • Enclosure Material : PBT
    • Output Circuit Type : DC
  • Contractual warranty
    • Warranty : 18 months
  • Complementary
    • Current Consumption : <= 10 mA no-load
    • Height : 32 mm
    • Maximum Delay Response : 0.1 ms
    • Status Led : output state 1 LED yellow)
    • Operating Zone : 0-4 mm
    • Maximum Voltage Drop : <2 V closed)
    • Marking : CE
    • Net Weight : 0.045 kg
    • Switching Frequency : <= 2000 Hz
    • Differential Travel : 1...15% of Sr
    • Maximum Delay Recovery : 0.1 ms
    • Maximum Delay First Up : 5 ms
    • Supply Voltage Limits : 10-36 V DC
    • Wire Insulation Material : PvR
    • Detection Face : frontal
    • Width : 15 mm
    • Front Material : PBT
    • Depth : 8 mm
  • Offer Sustainability
    • Rohs Exemption Information : Yes
    • Mercury Free : Yes
    • Environmental Disclosure : ENVPEP071001EN
    • Sustainable Offer Status : Green Premium product
    • Reach Regulation : Reference contains Substances of Very High Concern above the threshold
    • California Proposition 65 : WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    • Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
  • Environment
    • Product Certifications : CSA || UL || C-tick
    • Ambient Air Temperature For Operation : -25-70 °C
    • Vibration Resistance : 25 gn +/- 2 mm 10-55 Hz)IEC 60068-2-6
    • Shock Resistance : 50 gn 11 ms IEC 60068-2-27
    • Ambient Air Temperature For Storage : -40-85 °C