SQUARE D

Individual meter socket, ringless socket, horn bypass, 4 jaws no release, UG, 200 A, up to 600 VAC single phase 3W

METER SOCKET RINGLESS HORN UG

SQDUHTRS223A UHTRS223A 785901911685
308.44 / EACH
  • Certifications: UL
  • Depth: 4.94 in
  • Enclosure Material: Steel
  • Height: 13 in
  • Mounting Type: Surface
  • Number of Phases: 1
  • Warranty Length: 18 mth
  • Width: 13 in
Individual Meter Sockets are available for single or three phase with a 600 VAC maximum. These individual meter sockets can be with and without horn or lever bypass. The sockets have a 10 kA short circuit current rating as standard but could have a higher rating with utility approval. Units are supplied with a bonded neutral. Units are supplied with a hub opening in top end wall which requires the use of a bolt on hub or a closing plate. This ringless meter socket has four jaws with a horn bypass and without jaw release. This meter socket is for single phase 3 wire systems up to 600 VAC. This meter socket has a 200 A rating. This unit can be for a feed from an underground service. This unit has a NEMA 3R surface mounting enclosure that is 13.00 inches tall, 13.00 inches wide and 4.94 inches deep. The main lugs, the load lugs and the neutral lug will accept one 8 AWG to 2/0 AWG copper or aluminum wire. The ground will accept 14 AWG to 2 AWG copper or aluminum wire. This individual meter socket is UL Listed.
  • Product Description
  • Specifications
Individual Meter Sockets are available for single or three phase with a 600 VAC maximum. These individual meter sockets can be with and without horn or lever bypass. The sockets have a 10 kA short circuit current rating as standard but could have a higher rating with utility approval. Units are supplied with a bonded neutral. Units are supplied with a hub opening in top end wall which requires the use of a bolt on hub or a closing plate. This ringless meter socket has four jaws with a horn bypass and without jaw release. This meter socket is for single phase 3 wire systems up to 600 VAC. This meter socket has a 200 A rating. This unit can be for a feed from an underground service. This unit has a NEMA 3R surface mounting enclosure that is 13.00 inches tall, 13.00 inches wide and 4.94 inches deep. The main lugs, the load lugs and the neutral lug will accept one 8 AWG to 2/0 AWG copper or aluminum wire. The ground will accept 14 AWG to 2 AWG copper or aluminum wire. This individual meter socket is UL Listed.
  • Environment
    • Nema Degree Of Protection : NEMA 3R
    • Product Certifications : UL Listed
  • Offer Sustainability
    • Eu Rohs Directive : Under investigation
    • California Proposition 65 : WARNING: This product can expose you to chemicals including: Nickel (Metallic), which is known to the State of California to cause cancer, and Toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • Product Or Component Type : Meter Socket
  • Meter Socket Type : ringless
  • Hub Type : solid top
  • Contractual warranty
    • Warranty : 18 months
  • Complementary
    • Enclosure Material : steel
    • Device Mounting : surface
    • Bypass Type : horn bypass
    • Wiring Configuration : 3-wire
    • [Ue] Rated Operational Voltage : 600 V AC
    • Meter Socket Rated Current : 200 A
    • Electrical Connection : lugs 0.5" hex
    • Number Of Jaws : 4 without jaw release
    • Service Feed Location : UG
    • Phase : 1 phase
    • Maximum Width : 13 in
    • Box Number : 2R
    • Awg Gauge : AWG 1/0...350 kcmil 1 aluminium/copper)line || AWG 14...AWG 2 1 aluminium/copper)service ground
    • Maximum Depth : 4.94 in
    • Maximum Height : 13 in