This TeSys D contactor has been designed for motor control in railway applications. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 9A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 2HP at 200 to 208VAC, 2HP at 240VAC, 5HP at 480VAC and 7.5HP at 600VAC three phase. Contactor is also rated for 0.33HP at 115VAC and 1HP at 240VAC single phase. Contactor is supplied with a low consumption 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as stanard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.15 inches tall, 1.77 inches wide and 3.74 inches deep. It weighs 1.06 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
- Complementary
- Product Certifications : IEC || CCC || EAC || UA || TR || UKCA
- Non-Overlap Time : 1.5 ms on de-energisation between NC and NO contact || 1.5 ms on energisation between NC and NO contact
- Minimum Switching Current : 5 mA for signalling circuit
- Power Dissipation Per Pole : 1.56 W AC-1 || 0.2 W AC-3 || 0.2 W AC-3e
- Average Impedance : 2.5 mOhm - Ith 25 A 50 Hz for power circuit
- Auxiliary Contact Composition : 1 NO + 1 NC
- [Ith] Conventional Free Air Thermal Current : 10 A (at 60 °C) for signalling circuit || 25 A (at 60 °C) for power circuit
- Control Circuit Voltage Limits : 0.1...0.25 Uc -40-70 °C drop-out DC || 0.7...1.25 Uc -40-70 °C operational DC
- Mounting Support : rail || plate
- Contact Compatibility : M5
- Control Circuit Type : DC low consumption
- Standards : EN/IEC 60947-4-1 || EN/IEC 60947-5-1 || EN 45545: R22 HL3 || EN 45545: R26 HL3 || DIN 5510-2
- Safety Reliability Level : B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
- Hold-In Power Consumption In W : 4-4 W 20 °C
- Insulation Resistance : > 10 MOhm for signalling circuit
- Rated Breaking Capacity : 250 A at 440 V for power circuit conforming to IEC 60947
- Irms Rated Making Capacity : 250 A at 440 V for power circuit conforming to IEC 60947 || 140 A AC for signalling circuit conforming to IEC 60947-5-1 || 250 A DC for signalling circuit conforming to IEC 60947-5-1
- Associated Fuse Rating : 10 A gG for signalling circuit conforming to IEC 60947-5-1 || 25 A gG at <= 690 V coordination type 1 for power circuit || 20 A gG at <= 690 V coordination type 2 for power circuit
- [Uimp] Rated Impulse Withstand Voltage : 6 kV IEC 60947
- Pole Contact Composition : 3 NO
- Connections - Terminals : control circuit: lugs-ring terminals - external diameter: 8 mm || power circuit: lugs-ring terminals - external diameter: 9.5 mm
- Coil Technology : with integral suppression device
- Time Constant : 37 ms
- Operating Time : 77 ±15 % ms closing || 25 ±20 % ms opening
- Minimum Switching Voltage : 17 V for signalling circuit
- Maximum Operating Rate : 3600 cyc/h 60 °C
- Tightening Torque : control circuit 1.7 N.m lugs-ring terminals flat Ø 6 mm M3.5 || control circuit 1.7 N.m lugs-ring terminals Philips No 2 M3.5 || power circuit 1.7 N.m lugs-ring terminals Philips No 2 M3.5 || power circuit 1.7 N.m lugs-ring terminals flat Ø 6 mm M3.5 || control circuit 1.7 N.m lugs-ring terminals pozidriv No 2 M3.5 || power circuit 1.7 N.m lugs-ring terminals pozidriv No 2 M3.5
- Electrical Durability : 0.6 Mcycles 25 A AC-1 <= 440 V || 2 Mcycles 9 A AC-3 <= 440 V || 2 Mcycles 9 A AC-3e <= 440 V
- Mechanical Durability : 30 Mcycles
- Inrush Power In W : 4-4 W 20 °C)
- Auxiliary Contacts Type : mechanically linked 1 NO + 1 NC IEC 60947-5-1 || mirror contact 1 NC IEC 60947-4-1
- Compatibility Code : LC1D
- Operating Altitude : 0...9842.52 ft (0...3000 m)
- Overvoltage Category : III
- Motor Power Kw : 2.2 kW at 220/230 V AC 50 Hz (AC-3) || 4 kW at 380/400 V AC 50 Hz (AC-3) || 4 kW at 415 V AC 50 Hz (AC-3) || 4 kW at 440 V AC 50 Hz (AC-3) || 5.5 kW at 500 V AC 50 Hz (AC-3) || 5.5 kW at 660/690 V AC 50 Hz (AC-3) || 2.2 kW at 220/230 V AC 50 Hz (AC-3e) || 4 kW at 380/400 V AC 50 Hz (AC-3e) || 4 kW at 415 V AC 50 Hz (AC-3e) || 4 kW at 440 V AC 50 Hz (AC-3e) || 5.5 kW at 500 V AC 50 Hz (AC-3e) || 5.5 kW at 660/690 V AC 50 Hz (AC-3e)
- [Ui] Rated Insulation Voltage : power circuit 690 V IEC 60947-4-1 || signalling circuit 690 V IEC 60947-1
- Protective Cover : with
- Specifications
- [Ue] Rated Operational Voltage : power circuit <= 690 V AC 25...400 Hz
- Range Of Product : TeSys Deca
- Contactor Application : resistive load || motor control
- Product Or Component Type : contactor
- Range : TeSys || TeSys Deca
- Utilisation Category : AC-1 || AC-3 || AC-3e
- [Ie] Rated Operational Current : 9 A (at <60 °C) at <= 440 V AC AC-3 for power circuit || 25 A (at <60 °C) at <= 440 V AC AC-1 for power circuit || 9 A (at <60 °C) at <= 440 V AC AC-3e for power circuit
- Poles Description : 3P
- Device Short Name : LC1D
- Offer Sustainability
- Rohs Exemption Information : Yes
- Mercury Free : Yes
- Environmental Disclosure : ENVPEP2205004
- Sustainable Offer Status : Green Premium product
- Pvc Free : Yes
- Reach Regulation : Reference contains Substances of Very High Concern above the threshold
- California Proposition 65 : WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
- Weee : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- China Rohs Regulation : Product out of China RoHS scope. Substance declaration for your information.
- Circularity Profile : N/A
- Eu Rohs Directive : Compliant with Exemptions
- Environment
- Height : 77 mm
- Climatic Withstand : IACS E10 || IEC 60947-1 Annex Q category D
- Net Weight : 0.32 kg
- Ambient Air Temperature For Storage : -60-80 °C
- Mechanical Robustness : vibrations contactor open 2 Gn, 5...300 Hz) || vibrations contactor closed 4 Gn, 5...300 Hz) || shocks contactor open 10 Gn for 11 ms) || shocks contactor closed 15 Gn for 11 ms)
- Fire Resistance : 850 °C IEC 60695-2-1
- Width : 45 mm
- Depth : 95 mm