TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 50A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 15HP at 200 to 208VAC, 15HP at 240VAC, 40HP at 480VAC and 40HP at 600VAC three phase. Contactor is also rated for 3HP at 115VAC and 7.5HP at 240VAC single phase. Contactor is supplied with a 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 6.93 inches deep. It weighs 4.82 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards.

• Prop 65
• WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

• Environment
• Product Certifications : LROS (Lloyds register of shipping) || GOST || CCC || RINA || GL || UL || DNV || CSA || BV
• Net Weight : 2.185 kg
• Flame Retardance : V1 conforming to UL 94
• Operating Altitude : 0...9842.52 ft (0...3000 m)
• Width : 85 mm
• Depth : 176 mm
• Height : 127 mm
• Standards : EN 60947-5-1 || UL 508 || IEC 60947-4-1 || IEC 60947-5-1 || CSA C22.2 No 14 || EN 60947-4-1
• Climatic Withstand : IACS E10 exposure to damp heat
• Ip Degree Of Protection : IP2X IEC 60529 || IP2X VDE 0106
• Mechanical Robustness : shocks contactor opened 10 Gn for 11 ms) || shocks contactor closed 15 Gn for 11 ms) || vibrations contactor opened 2 Gn, 5...300 Hz) || vibrations contactor closed 4 Gn, 5...300 Hz)
• Fire Resistance : 850 °C IEC 60695-2-1
• Contractual warranty
• Warranty : 18 months
• Environmental data
• Mercury Free : Yes
• Reach Regulation : Free of Substances of Very High Concern above the threshold
• Reach Free Of Svhc : Yes
• Minimum Percentage Of Recycled Plastic Content : 0
• Take-Back : No
• Global Warming ; Total Life Cycle​ : 85 kg CO2 eq.
• Carbon Footprint (Kg Co2 Eq, Total Life Cycle) : 84.65613776
• Rohs Exemption Information : Yes
• Packaging Made With Recycled Cardboard : Yes
• Environmental Disclosure : ENVPEP110205EN
• Packaging Without Single Use Plastic : No
• Toxic Heavy Metal Free : Yes
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
• Circularity Profile : N/A
• Pvc Free : Yes
• Eu Rohs Directive : Compliant
• Complementary
• Non-Overlap Time : 1.5 ms on de-energisation between NC and NO contacts || 1.5 ms on energisation between NC and NO contacts
• Minimum Switching Current : 5 mA for control circuit
• Power Dissipation Per Pole : 3.7 W AC-3 || 9.6 W AC-1 || 3.7 W AC-3e
• Auxiliary Contact Composition : 1 NO + 1 NC
• Mounting Support : rail || plate
• Hold-In Power Consumption In W : 7.4-7.4 W 20 °C
• Insulation Resistance : > 10 MOhm for control circuit
• [Uimp] Rated Impulse Withstand Voltage : 8 kV IEC 60947
• Pole Contact Composition : 3 NO
• Connections - Terminals : control circuit: lugs - external diameter: 8 mm || power circuit: lugs - external diameter: 16 mm
• Coil Technology : built-in bidirectional peak limiting diode suppressor
• Maximum Operating Rate : 3600 cyc/h at 60 °C
• Inrush Power In W : 19-19 W 20 °C)
• Auxiliary Contacts Type : mechanically linked 1 NO + 1 NC IEC 60947-5-1 || mirror contact 1 NC IEC 60947-4-1
• Overvoltage Category : III
• Maximum Horse Power Rating : 3 hp at 115 V AC 60 Hz for 1 phase motors || 7.5 hp at 230/240 V AC 60 Hz for 1 phase motors || 15 hp at 200/208 V AC 60 Hz for 3 phase motors || 15 hp at 230/240 V AC 60 Hz for 3 phase motors || 40 hp at 460/480 V AC 60 Hz for 3 phase motors || 40 hp at 575/600 V AC 60 Hz for 3 phase motors
• Motor Power Kw : 22 kW at 380...400 V AC 50 Hz || 25 kW at 415 V AC 50 Hz || 30 kW at 440 V AC 50 Hz || 30 kW at 500 V AC 50 Hz || 33 kW at 660...690 V AC 50 Hz || 15 kW at 220...230 V AC 50 Hz || 30 kW at 1000 V AC 50 Hz
• [Ui] Rated Insulation Voltage : control circuit 600 V CSA || control circuit 600 V UL || power circuit 600 V CSA || power circuit 600 V UL || control circuit 690 V IEC 60947-1 || power circuit 690 V IEC 60947-1
• Rated Operational Power In W : 14 W 24 V DC-13 10000000 cycles - control circuit || 48 W 24 V DC-13 3000000 cycles - control circuit || 96 W 24 V DC-13 1000000 cycles - control circuit
• Protective Cover : with
• [Ith] Conventional Free Air Thermal Current : 10 A (at 60 °C) for control circuit || 80 A (at 60 °C) for power circuit
• Control Circuit Voltage Limits : 0.1...0.3 Uc (-40-70 °C):drop-out DC || 0.75...1.25 Uc (-40-60 °C):operational DC || 1...1.25 Uc (60-70 °C):operational DC
• Control Circuit Type : DC standard
• Safety Reliability Level : B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
• Rated Breaking Capacity : 900 A at 440 V for power circuit conforming to IEC 60947
• Irms Rated Making Capacity : 250 A DC for control circuit conforming to IEC 60947-5-1 || 900 A at 440 V for power circuit conforming to IEC 60947
• Associated Fuse Rating : 10 A gG for control circuit conforming to IEC 60947-5-1 || 100 A gG at <= 690 V coordination type 1 for power circuit || 100 A gG at <= 690 V coordination type 2 for power circuit
• Time Constant : 34 ms
• Operating Time : 20 ±20 % ms opening || 50 ±15 % ms closing
• Minimum Switching Voltage : 17 V for control circuit
• Tightening Torque : control circuit 1.7 N.m lugs Philips No 2 || control circuit 1.7 N.m lugs flat Ø 6 mm || power circuit 2.5 N.m lugs flat Ø 8 mm || control circuit 1.7 N.m lugs pozidriv No 2
• Mechanical Durability : 10000000 cycles
• Compatibility Code : LC1D
• Specifications
• Country of Origin : Czechia
• Width : 85 mm
• Height : 127 mm
• Weight : 2.185 kg
• [Uc] Control Circuit Voltage : 24 V DC
• [Ue] Rated Operational Voltage : power circuit <= 690 V AC 25...400 Hz
• Contactor Application : motor control || resistive load
• Product Or Component Type : contactor
• Utilisation Category : AC-4 || AC-1 || AC-2 || AC-3 || AC-3e
• [Ie] Rated Operational Current : 50 A (at <60 °C) at <= 440 V AC AC-3 for power circuit || 80 A (at <60 °C) at <= 440 V AC AC-1 for power circuit || 50 A (at <60 °C) at <= 440 V AC AC-3e for power circuit
• Poles Description : 3P
• Range Of Product : TeSys Deca
• Range : TeSys
• Device Short Name : LC1D