TeSys D Green contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 50A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 15HP at 200 to 208VAC, 15HP at 240VAC, 40HP at 480VAC and 40HP at 600VAC three phase. Contactor is also rated for 3HP at 115VAC and 7.5HP at 240VAC single phase. Equipped with an electronic 24V DC coil, low consumption, for a direct control by a PLC output 24V DC / 500mA. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 2.20 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
- Environment
- Product Certifications : CCC || CSA || EAC || UL || KC || DNV-GL || LROS (Lloyds register of shipping) || UKCA
- Height : 122 mm
- Standards : EN/IEC 60947-4-1 || EN/IEC 60947-5-1 || UL 60947-4-1 || CSA C22.2 No 60947-4-1 || IEC 60335-1
- Climatic Withstand : IACS E10 exposure to damp heat || IEC 60947-1 Annex Q category D exposure to damp heat
- Net Weight : 0.997 kg
- Flame Retardance : V1 conforming to UL 94
- Ip Degree Of Protection : IP20 front face IEC 60529
- Mechanical Robustness : vibrations contactor open 2 Gn, 5...300 Hz) || vibrations contactor closed 4 Gn, 5...300 Hz) || shocks contactor open 10 Gn for 11 ms) || shocks contactor closed 15 Gn for 11 ms)
- Operating Altitude : 0...9842.52 ft (0...3000 m)
- Fire Resistance : 850 °C IEC 60695-2-1
- Width : 55 mm
- Depth : 120 mm
- Permissible Ambient Air Temperature Around The Device : -40-60 °C || 60-70 °C with derating
- Contractual warranty
- Offer Sustainability
- Rohs Exemption Information : Yes
- Mercury Free : Yes
- Environmental Disclosure : ENVPEP1607010EN
- Sustainable Offer Status : Green Premium product
- Reach Regulation : Reference contains Substances of Very High Concern above the threshold
- Weee : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- China Rohs Regulation : Product out of China RoHS scope. Substance declaration for your information.
- Circularity Profile : ENVEOLI1607010EN
- Eu Rohs Directive : Compliant with Exemptions
- Halogen Content Performance : Halogen free plastic parts & cables product
- Complementary
- Non-Overlap Time : 1.5 ms on de-energisation between NC and NO contact || 1.5 ms on energisation between NC and NO contact
- Minimum Switching Current : 5 mA for signalling circuit
- Power Dissipation Per Pole : 9.6 W AC-1 || 3.7 W AC-3 || 3.7 W AC-3e
- Average Impedance : 1.5 mOhm - Ith 80 A 50 Hz for power circuit
- Auxiliary Contact Composition : 1 NO + 1 NC
- [Ith] Conventional Free Air Thermal Current : 80 A (at 60 °C) for power circuit || 10 A (at 60 °C) for signalling circuit
- Control Circuit Voltage Limits : <= 0.1 Uc -40-70 °C drop-out DC || 0.8...1.2 Uc -40-60 °C operational DC || 1...1.2 Uc 60-70 °C operational DC
- Mounting Support : plate || rail
- Control Circuit Type : DC DC low consumption
- Safety Reliability Level : B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
- Pollution Degree : 3
- Hold-In Power Consumption In W : 0.5-0.5 W 20 °C
- Insulation Resistance : > 10 MOhm for signalling circuit
- Rated Breaking Capacity : 900 A at 440 V for power circuit conforming to IEC 60947
- Irms Rated Making Capacity : 900 A at 440 V for power circuit conforming to IEC 60947 || 140 A AC for signalling circuit conforming to IEC 60947-5-1 || 250 A DC for signalling circuit conforming to IEC 60947-5-1
- Associated Fuse Rating : 10 A gG for signalling circuit conforming to IEC 60947-5-1 || 100 A gG at <= 690 V coordination type 1 for power circuit || 100 A gG at <= 690 V coordination type 2 for power circuit
- [Uimp] Rated Impulse Withstand Voltage : 6 kV IEC 60947
- Pole Contact Composition : 3 NO
- Connections - Terminals : power circuit: lugs-ring terminals - external diameter: 16.5 mm || control circuit: lugs-ring terminals - external diameter: 8 mm
- Coil Technology : built-in bidirectional peak limiting
- Operating Time : 55...65 ms closing || 20...80 ms opening
- Minimum Switching Voltage : 17 V for signalling circuit
- Maximum Operating Rate : 3600 cyc/h 60 °C
- Signalling Circuit Frequency : 25...400 Hz
- Tightening Torque : control circuit 1.7 N.m lugs-ring terminals flat Ø 6 mm M3.5 || control circuit 1.7 N.m lugs-ring terminals Philips No 2 M3.5 || power circuit 6 N.m lugs-ring terminals hexagonal 10 mm M6 || power circuit 6 N.m lugs-ring terminals pozidriv No 2 M4 || control circuit 1.7 N.m lugs-ring terminals pozidriv No 2 M3.5
- Electrical Durability : 1.8 Mcycles 42 A AC-3 <= 440 V || 0.5 Mcycles 80 A AC-1 <= 440 V || 1.8 Mcycles 42 A AC-3e <= 440 V
- Mechanical Durability : 6 Mcycles
- Inrush Power In W : 11-11 W 20 °C)
- Auxiliary Contacts Type : mechanically linked 1 NO + 1 NC IEC 60947-5-1 || mirror contact 1 NC IEC 60947-4-1
- Compatibility Code : LC1D
- Overvoltage Category : III
- Maximum Horse Power Rating : 3 hp at 115 V AC 60 Hz for 1 phase motors || 7.5 hp at 230/240 V AC 60 Hz for 1 phase motors || 15 hp at 200/208 V AC 60 Hz for 3 phase motors || 15 hp at 230/240 V AC 60 Hz for 3 phase motors || 40 hp at 460/480 V AC 60 Hz for 3 phase motors || 40 hp at 575/600 V AC 60 Hz for 3 phase motors
- Motor Power Kw : 15 kW at 220...230 V AC 50 Hz (AC-3) || 22 kW at 380...400 V AC 50 Hz (AC-3) || 25 kW at 415 V AC 50 Hz (AC-3) || 30 kW at 440 V AC 50 Hz (AC-3) || 30 kW at 500 V AC 50 Hz (AC-3) || 33 kW at 660...690 V AC 50 Hz (AC-3) || 15 kW at 220...230 V AC 50 Hz (AC-3e) || 22 kW at 380...400 V AC 50 Hz (AC-3e) || 25 kW at 415 V AC 50 Hz (AC-3e) || 30 kW at 440 V AC 50 Hz (AC-3e) || 30 kW at 500 V AC 50 Hz (AC-3e) || 33 kW at 660...690 V AC 50 Hz (AC-3e)
- [Ui] Rated Insulation Voltage : power circuit 690 V IEC 60947-4-1 || signalling circuit 690 V IEC 60947-1
- [Icw] Rated Short-Time Withstand Current : 84 A 40 °C - 10 min for power circuit || 208 A 40 °C - 1 min for power circuit || 400 A 40 °C - 10 s for power circuit || 810 A 40 °C - 1 s for power circuit || 100 A - 1 s for signalling circuit || 120 A - 500 ms for signalling circuit || 140 A - 100 ms for signalling circuit
- Heat Dissipation : 0.5-0.5 W
- Protective Cover : with
- Specifications
- [Uc] Control Circuit Voltage : 24 V DC
- [Ue] Rated Operational Voltage : power circuit <= 690 V AC 25...400 Hz
- Range Of Product : TeSys Deca
- Contactor Application : resistive load || motor control
- Product Or Component Type : contactor
- Range : TeSys || TeSys Deca
- Utilisation Category : AC-1 || AC-3 || AC-3e
- [Ie] Rated Operational Current : 80 A (at <60 °C) at <= 440 V AC-1 for power circuit || 50 A (at <60 °C) at <= 440 V AC-3 for power circuit || 50 A (at <60 °C) at <= 440 V AC-3e for power circuit
- Poles Description : 3P
- Device Short Name : LC1D