Electronic pressure sensors, Pressure sensors XM, transmitter, XMLP, 10 bar, G1/4 A male, 0,5...4,5 V, DIN, set of 1

ELECTRONIC PRESSURE SENSORS, P

SQDXMLP010BC11F 3389119638630
124.27 / EA
http://schema.org/OutOfStock
  • Certifications: CE, CULus, EAC, RCM
  • Current: 7 mA
  • Diameter: 26 mm
  • Length: 60.6 mm
  • Net Weight: 0.106 kg
  • Standard: EN/IEC 61326-2-3, NSF ANSI 61
QTY
  • Specifications
  • Specifications
    • Pressure Sensor Type : pressure transmitter
    • Analogue Output Function : 0.5...4.5 V, 3-wire
    • Type Of Output Signal : analogue
    • Controlled Fluid : air -30-135 °C) || fresh water 0-135 °C) || hydraulic oil -30-135 °C) || gas -30-135 °C) || refrigeration fluid -30-135 °C)
    • Range Of Product : OsiSense XM
    • Electrical Connection : 1 male connector EN 175301-803-A (ex DIN43650) 3 pins
    • Pressure Sensor Size : 10-10 bar
    • Quantity Per Set : set of 1
    • Electrical Circuit Type : control circuit
    • Product Or Component Type : electronic pressure sensors
    • Type Of Packing : individual
    • [Us] Rated Supply Voltage : 5 V DC SELV 4.5-5.5 V)
    • Local Display : without
    • Pressure Sensor Name : XMLP
    • Current Consumption : < 7 mA
    • Fluid Connection Type : G 1/4A (male) DIN 3852-E
  • Complementary
    • Accuracy : 0.1 % of the measuring range
    • Diameter : 26 mm
    • [Uimp] Rated Impulse Withstand Voltage : 0.5 kV
    • Mechanical Durability : 10000000 cycles
    • Drift Of The Zero Point : +/- 0.02 % of measuring range/°K
    • Operating Position : any position
    • Measurement Accuracy : +/- 0.5 % of the measuring range
    • Electromagnetic Compatibility : electrical fast transient/burst immunity test EN/IEC 61000-4-4 2 kV || electrostatic discharge immunity test EN/IEC 61000-4-2 8 kV air, 4 kV contact || 1.2/50 µs shock waves immunity test EN/IEC 61000-4-5 1 kV 42 Ohm || immunity to magnetic fields EN/IEC 61000-4-8 100 A/m 50 Hz || susceptibility to electromagnetic fields EN/IEC 61000-4-3 10 V/m 80...3000 MHz || radiated RF fields EN/IEC 61000-4-6 10 V 0.01...80 MHz
    • Protection Type : reverse polarity || load short-circuit
    • Drift Of The Sensitivity : +/- 0.02 % of measuring range/°K
    • Maximum Permissible Accidental Pressure : 30 bar
    • Materials In Contact With Fluid : fluorocarbon FPM || stainless steel AISI 316L
    • Length : 60.6 mm
    • Destruction Pressure : 60 bar
    • Net Weight : 0.106 kg
    • Response Time On Output : <= 2 ms 10...90 % of full scale
    • Pressure Setting Range : 0-10 bar
  • Offer Sustainability
    • Rohs Exemption Information : Yes
    • Mercury Free : Yes
    • Environmental Disclosure : ENVPEP1511013EN
    • Sustainable Offer Status : Green Premium product
    • Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
    • Reach Regulation : Free of Substances of Very High Concern above the threshold
    • California Proposition 65 : WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    • Reach Free Of Svhc : Yes
  • Environment
    • Product Certifications : EAC || CE || cULus || RCM
    • Ambient Air Temperature For Operation : -30-85 °C
    • Ambient Air Temperature For Storage : -50-100 °C
    • Standards : NSF ANSI 61 || EN/IEC 61326-2-3
    • Shock Resistance : 100 gn 11 ms EN/IEC 60068-2-27
    • Vibration Resistance : 20 gn 15-2000 Hz) EN/IEC 60068-2-6
    • Protective Treatment : TC
    • Ip Degree Of Protection : IP65 conforming to EN/IEC 60529