Altivar Solar variable speed drive range is designed to improve pump performance and increase pump availability while reducing the total system cost. They are robust, simple to commission, and easily integrated into different machine layouts and cabinets. It controls motors of 15kW/20HP power rating with a three-phase supply voltage of 200…240V 50/60Hz. It embeds dedicated functions for synchronous motors, ATV logic, and pumping and safety functions. Altivar Solar VSD integrates the Modbus and CANopen communication protocols as standard. The Altivar Solar VFDs have a compact control block design. Its dimensions are 180mm (width) x 330mm (depth) x 198mm (height) and it weighs 6.9kg. Altivar Solar drives bring key benefits to our solar pump system builders. It conforms to IEC/EN/UL 61800-5-1, EN/IEC 61800-3 (Environments 1 and 2, category C2, C3), IEC 60721-3, IEC 61508, and IEC 13849-1. It is certified CE, UKCA, UR (UL recognized component), UL 61800-5-1, RCM, and RoHS EU and China. These drives have a dedicated compatibility mode function, enabling customers to replace a legacy product ATV312 Solar without changing the PLC program. Our Altivar Solar Sizer tool will help you design your Solar system. The Altivar Solar range achieves superior upgradable performance by enhancing its embedded functionality and performance capacity for hardware and software. It is a Green Premium product designed to take environmental considerations beyond current directives and regulations and complies with RoHS and REACH.

• Prop 65
• WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

• Environment
• Product Certifications : CE || UR || UKCA || RCM
• Maximum Deflection Under Vibratory Load (During Operation) : 1.5 mm at 2...13 Hz
• Standards : IEC 61800-5-1
• Regulation Loop : adjustable PID regulator
• Permitted Relative Humidity (During Operation) : class 3K5 according to EN 60721-3
• Operating Altitude : 3280.84...6561.68 ft (1000...2000 m) with current derating 1 % per 100 m || <= 3280.84 ft (1000 m) without derating
• Overvoltage Category : II
• Environmental Class (During Operation) : class 3C3 according to IEC 60721-3-3 || class 3S2 according to IEC 60721-3-3
• Maximum Acceleration Under Shock Impact (During Operation) : 150 m/s² at 11 ms
• Pollution Degree : 2
• Electromagnetic Compatibility : electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 || conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 || voltage dips and interruptions immunity test conforming to IEC 61000-4-11
• Ambient Air Temperature For Operation : -10-50 °C without derating || 50-60 °C with derating factor
• Volume Of Cooling Air : 156.0 m3/h
• Marking : CE || UR || UKCA || RCM
• Maximum Acceleration Under Vibrational Stress (During Operation) : 10 m/s² at 13...200 Hz
• Noise Level : 58 dB
• Ambient Air Temperature For Storage : -25-70 °C
• Assembly Style : with heat sink
• Operating Position : vertical +/- 10 degree
• Ambient Air Transport Temperature : -25-70 °C
• Speed Accuracy : +/- 10 % of nominal slip 0.2 Tn to Tn
• Complementary
• Prospective Line Isc : 22 kA
• Network Frequency : 50-60 Hz
• Power Dissipation In W : fan 551 W 200 V 4 kHz
• Line Current : 79.7 A 200 V heavy duty) || 67.1 A 240 V heavy duty)
• Analogue Output Type : software-configurable current AQ1 0...20 mA 800 Ohm 10 bits || software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits
• Discrete Output Type : open collector DQ+ 0-1 kHz 30 V DC 100 mA || open collector DQ- 0-1 kHz 30 V DC 100 mA
• Electrical Connection : screw terminal 0.5...1.5 mm² analog input || screw terminal analog output || screw terminal
• Asynchronous Motor Control Profile : voltage/frequency ratio, 5 points || flux vector control without sensor, standard || voltage/frequency ratio - Energy Saving, quadratic U/f || flux vector control without sensor - Energy Saving || voltage/frequency ratio, 2 points
• Maximum Switching Current : relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 250 V AC || relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 30 V DC || relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R2A, R2C resistive, cos phi = 1 5 A 250 V AC || relay output R2A, R2C resistive, cos phi = 1 5 A 30 V DC
• 4 Quadrant Operation Possible : true
• Relative Symmetric Network Frequency Tolerance : 5 %
• Apparent Power : 27.9 kVA 240 V heavy duty)
• Net Weight : 6.9 kg
• With Safety Function Safe Direction (Sdi) : false
• Type Of Polarization : no impedance
• Relay Output Type : configurable relay logic R1A 1 NO 100000 cycles || configurable relay logic R1B 1 NC 100000 cycles || configurable relay logic R1C || configurable relay logic R2A 1 NO 100000 cycles || configurable relay logic R2C
• Switching Frequency : 2...16 kHz adjustable || 4...16 kHz with derating factor
• Maximum Transient Current : 99.0 A 60 s
• Analogue Input Number : 3
• Motor Slip Compensation : automatic whatever the load || adjustable 0...300 % || not available in voltage/frequency ratio (2 or 5 points)
• Discrete Output Number : 3
• With Safety Function Safe Position (Sp) : false
• Method Of Access : slave CANopen
• With Safety Function Safely Limited Position (Slp) : false
• With Safety Function Safe Operating Stop (Sos) : false
• Number Of Addresses : 1-247 || 1-127
• Discrete Input Number : 7
• Local Signalling : 1 LED (red) for drive fault || 1 LED (red) for CANopen error || 1 LED (green) for CANopen run
• Short-Circuit Protection : thermal protection
• With Sft Fct Safe Stop 2 (Ss2) : false
• With Safety Function Safe Stop 1 (Ss1) : true
• Width : 180 mm
• Depth : 198.0 mm
• Analogue Input Type : AI1 voltage 0...10 V DC 30 kOhm 10 bits || AI2 bipolar differential voltage +/- 10 V DC 30 kOhm 10 bits || AI3 current 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration) 250 Ohm 10 bits
• Maximum Output Frequency : 0.599 kHz
• With Safety Function Safe Brake Management (Sbc/Sbt) : false
• Height : 330 mm
• Acceleration And Deceleration Ramps : linear || U || S || CUS || ramp switching || acceleration/deceleration ramp adaptation || acceleration/deceleration automatic stop with DC injection || automatic adaptation of ramp if braking capacity exceeded, by using resistor || linear adjustable separately from 0.01 to 6000 s
• Maximum Output Voltage : 240 V
• Base Load Current At High Overload : 8.0 A
• With Safety Function Safe Speed Monitor (Ssm) : false
• Relay Output Number : 2
• Transient Overtorque : 170-200 % of nominal motor torque
• With Safety Function Safe Torque Off (Sto) : true
• Data Format : 8 bits, configurable odd, even or no parity
• Analogue Output Number : 1
• Minimum Switching Current : relay output R1A, R1B, R1C, R2A, R2C 5 mA 24 V DC
• Discrete Input Logic : positive logic (source) || negative logic (sink)
• With Safety Function Safe Programmable Logic : false
• Brake Chopper Integrated : true
• Nominal Switching Frequency : 4 kHz
• Braking To Standstill : by DC injection
• Discrete Input Type : STO safe torque off, 24 V DC1.5 kOhm || DI1...DI6 logic inputs, 24 V DC 30 V) || DI5 programmable as pulse input 0-30 kHz, 24 V DC 30 V)
• Protection Type : input phase breaks drive || overcurrent between output phases and earth drive || overheating protection drive || short-circuit between motor phases drive || thermal protection drive
• With Safety Function Safely Limited Speed (Sls) : true
• Braking Torque : 170 % with braking resistor
• Synchronous Motor Control Profile : vector control without sensor
• Power Factor : 0.618 at 230 V
• Environmental data
• Weee Label : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• Reach Regulation : Reference contains Substances of Very High Concern above the threshold
• Take-Back : No
• Carbon Footprint Of The Manufacturing Phase [A1 To A3] : 88.59265615605855
• Sustainable Packaging : Yes
• Total Lifecycle Carbon Footprint : 15 999 kg CO2 eq.
• Carbon Footprint (Kg Co2 Eq, Total Life Cycle) : 15998.748275944425
• Rohs Exemption Information : Yes
• Packaging Made With Recycled Cardboard : Yes
• Environmental Disclosure : ENVPEP1604023EN
• Packaging Without Single Use Plastic : Yes
• Scip Number : 113ee97a-ee48-474b-8a47-e855ec6d6d22
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Carbon Footprint Of The Installation Phase [A5] : 1.915562301512323
• Circularity Profile : ENVEOLI1604023EN
• Carbon Footprint Of The Use Phase [B2, B3, B4, B6] : 15894
• Carbon Footprint Of The End-Of-Life Phase [C1 To C4] : 13 kg CO2 eq.
• Carbon Footprint Of The Distribution Phase [A4] : 1 kg CO2 eq.
• Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
• Specifications
• Country of Origin : Indonesia
• Width : 180 mm
• Height : 330 mm
• Weight : 6.9 kg
• Variant : standard version
• Format Of The Drive : compact
• Product Or Component Type : variable speed drive
• Ip Degree Of Protection : IP20
• Communication Port Protocol : Modbus serial || CANopen
• Nominal Output Current : 66.0 A
• Product Specific Application : pumping applications
• Option Card : communication module, Ethernet IP/Modbus TCP
• Range Of Product : Altivar Solar
• Motor Power Kw : 15.0 kW heavy duty
• [Us] Rated Supply Voltage : 200...240 V - 15...10 %
• Mounting Mode : wall mount
• Emc Filter : without EMC filter