TeSys Deca contactor, 4 poles (4NO), for non-inductive load applications up to 60A/440V AC-1. They can be used to create motor starters for almost any type of application. It provides a 24V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror contact), power connection by EverLink BTR screw connectors and control by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (70mm width), DIN-rail mounting or screw fixing. Power contacts have a 60A resistive load rating. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine). Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.76 inches wide and 4.72 inches deep. It weighs 2.40 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards.

• Prop 65
• WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

• Environment
• Product Certifications : GL || LROS (Lloyds register of shipping) || BV || CSA || UL || RINA || CCC || GOST || DNV
• Net Weight : 1.09 kg
• Flame Retardance : V1 conforming to UL 94
• Operating Altitude : 0...9842.52 ft (0...3000 m)
• Width : 70 mm
• Depth : 120 mm
• Permissible Ambient Air Temperature Around The Device : -40-60 °C || 60-70 °C with derating
• Height : 122 mm
• Standards : CSA C22.2 No 14 || EN 60947-4-1 || EN 60947-5-1 || IEC 60947-4-1 || IEC 60947-5-1 || UL 508 || IEC 60335-1
• Climatic Withstand : IACS E10 exposure to damp heat || IEC 60947-1 Annex Q category D exposure to damp heat
• Protective Treatment : THIEC 60068-2-30
• Ip Degree Of Protection : IP20 front face IEC 60529
• Mechanical Robustness : vibrations contactor open 2 Gn, 5...300 Hz) || vibrations contactor closed 4 Gn, 5...300 Hz) || shocks contactor closed 15 Gn for 11 ms) || shocks contactor open 10 Gn for 11 ms)
• Fire Resistance : 850 °C IEC 60695-2-1
• Contractual warranty
• Warranty : 18 months
• Environmental data
• Mercury Free : Yes
• Reach Regulation : Free of Substances of Very High Concern above the threshold
• Reach Free Of Svhc : Yes
• Weee : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• China Rohs Regulation : Pro-active China RoHS declaration (out of China RoHS legal scope)
• Take-Back : No
• Global Warming ; Total Life Cycle​ : 76 kg CO2 eq.
• Carbon Footprint (Kg Co2 Eq, Total Life Cycle) : 75.90994856
• Rohs Exemption Information : Yes
• Environmental Disclosure : ENVPEP1503009EN
• Toxic Heavy Metal Free : Yes
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
• Circularity Profile : ENVEOLI1503009EN
• Pvc Free : Yes
• Eu Rohs Directive : Compliant
• Complementary
• Non-Overlap Time : 1.5 ms on de-energisation between NC and NO contact || 1.5 ms on energisation between NC and NO contact
• Minimum Switching Current : 5 mA for signalling circuit
• Power Dissipation Per Pole : 5.8 W AC-1
• Average Impedance : 1.6 mOhm - Ith 60 A 50 Hz for power circuit
• Auxiliary Contact Composition : 1 NO + 1 NC
• Mounting Support : rail || plate
• Insulation Resistance : > 10 MOhm for signalling circuit
• Inrush Power In Va : 140-140 VA 60 Hz cos phi 0.75 (at 20 °C) || 160-160 VA 50 Hz cos phi 0.75 (at 20 °C)
• [Uimp] Rated Impulse Withstand Voltage : 6 kV IEC 60947
• Pole Contact Composition : 4 NO
• Connections - Terminals : control circuit: screw clamp terminals 2 1-2.5 mm² - cable stiffness: flexible with cable end || control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: flexible without cable end || control circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: flexible without cable end || control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: flexible with cable end || control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: solid without cable end || control circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: solid without cable end || power circuit: EverLink BTR screw connectors 1 1-35 mm² - cable stiffness: flexible without cable end || power circuit: EverLink BTR screw connectors 2 1-25 mm² - cable stiffness: flexible without cable end || power circuit: EverLink BTR screw connectors 1 1-35 mm² - cable stiffness: flexible with cable end || power circuit: EverLink BTR screw connectors 2 1-25 mm² - cable stiffness: flexible with cable end || power circuit: EverLink BTR screw connectors 1 1-35 mm² - cable stiffness: solid without cable end || power circuit: EverLink BTR screw connectors 2 1-25 mm² - cable stiffness: solid without cable end
• Coil Technology : without built-in suppressor module
• Maximum Operating Rate : 3600 cyc/h at 60 °C
• Auxiliary Contacts Type : mechanically linked 1 NO + 1 NC IEC 60947-5-1 || mirror contact 1 NC IEC 60947-4-1
• Hold-In Power Consumption In Va : 13-13 VA 60 Hz cos phi 0.3 (at 20 °C) || 15-15 VA 50 Hz cos phi 0.3 (at 20 °C)
• Overvoltage Category : III
• [Ui] Rated Insulation Voltage : power circuit 600 V CSA || power circuit 600 V UL || signalling circuit 690 V IEC 60947-1 || signalling circuit 600 V CSA || signalling circuit 600 V UL || power circuit 690 V IEC 60947-4-1
• Protective Cover : with
• [Ith] Conventional Free Air Thermal Current : 10 A (at 60 °C) for signalling circuit || 60 A (at 60 °C) for power circuit
• Control Circuit Voltage Limits : 0.3...0.6 Uc (-40-70 °C):drop-out AC 50/60 Hz || 0.8...1.1 Uc (-40-60 °C):operational AC 50 Hz || 0.85...1.1 Uc (-40-60 °C):operational AC 60 Hz || 1...1.1 Uc (60-70 °C):operational AC 50/60 Hz
• Control Circuit Type : AC 50/60 Hz
• Safety Reliability Level : B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
• Pollution Degree : 3
• Rated Breaking Capacity : 800 A at 440 V for power circuit conforming to IEC 60947
• Irms Rated Making Capacity : 140 A AC for signalling circuit conforming to IEC 60947-5-1 || 250 A DC for signalling circuit conforming to IEC 60947-5-1 || 800 A at 440 V for power circuit conforming to IEC 60947
• Associated Fuse Rating : 10 A gG for signalling circuit conforming to IEC 60947-5-1 || 80 A gG at <= 690 V coordination type 1 for power circuit || 80 A gG at <= 690 V coordination type 2 for power circuit
• Operating Time : 4...19 ms opening || 12...26 ms closing
• Minimum Switching Voltage : 17 V for signalling circuit
• Signalling Circuit Frequency : 25...400 Hz
• Tightening Torque : control circuit 1.7 N.m EverLink BTR screw connectors flat Ø 6 mm || control circuit 1.7 N.m EverLink BTR screw connectors Philips No 2 || power circuit 8 N.m EverLink BTR screw connectors 25-35 mm² hexagonal 4 mm || power circuit 5 N.m EverLink BTR screw connectors 1-25 mm² hexagonal 4 mm || control circuit 1.7 N.m EverLink BTR screw connectors pozidriv No 2 || power circuit 2.5 N.m EverLink BTR screw connectors pozidriv No 2
• Electrical Durability : 1.4 Mcycles 60 A AC-1 <= 440 V
• Mechanical Durability : 6 Mcycles
• Compatibility Code : LC1D
• [Icw] Rated Short-Time Withstand Current : 320 A 40 °C - 10 s for power circuit || 720 A 40 °C - 1 s for power circuit || 72 A 40 °C - 10 min for power circuit || 165 A 40 °C - 1 min for power circuit || 100 A - 1 s for signalling circuit || 120 A - 500 ms for signalling circuit || 140 A - 100 ms for signalling circuit
• Heat Dissipation : 4-5 W at 50/60 Hz
• Specifications
• Country of Origin : Indonesia
• Width : 70 mm
• Height : 122 mm
• Weight : 1.09 kg
• [Uc] Control Circuit Voltage : 24 V AC 50/60 Hz
• [Ue] Rated Operational Voltage : power circuit <= 690 V AC 25...400 Hz || power circuit <= 300 V DC
• Contactor Application : resistive load
• Product Or Component Type : contactor
• Utilisation Category : AC-1
• [Ie] Rated Operational Current : 60 A (at <60 °C) at <= 440 V AC AC-1 for power circuit
• Poles Description : 4P
• Range Of Product : TeSys Deca
• Range : TeSys || TeSys Deca
• Device Short Name : LC1D