TeSys Deca contactor, 3 poles (3NO), for motor control applications up to 95A/1000V AC-3/AC-3e (45kW@400V). They can be used to create motor starters for almost any type of application. It provides a 380V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts, power connection by screw terminals and control by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (85mm width), DIN-rail mounting or screw fixing. Contactor is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine). Contactor is supplied with a 380 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 5.12 inches deep. It weighs 3.55 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards.

• Prop 65
• WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

• Environment
• Product Certifications : CCC || UL || CB Scheme || CSA || CE || UKCA || Marine || EAC
• Net Weight : 1.61 kg
• Flame Retardance : V1 conforming to UL 94
• Operating Altitude : 0...9842.52 ft (0...3000 m)
• Width : 85 mm
• Depth : 130 mm
• Permissible Ambient Air Temperature Around The Device : -40-60 °C || 60-70 °C with derating
• Height : 127 mm
• Standards : EN 60947-4-1 || EN 60947-5-1 || IEC 60947-4-1 || IEC 60947-5-1 || CSA C22.2 No 14 || UL 60947-4-1 || IEC 60335-2-40:Annex JJ || UL 60335-2-40:Annex JJ || IEC 60335-1:Clause 30.2
• Climatic Withstand : IACS E10 exposure to damp heat
• Protective Treatment : THIEC 60068-2-30
• Ip Degree Of Protection : IP20 front face IEC 60529
• Mechanical Robustness : vibrations contactor open 2 Gn, 5...300 Hz) || shocks contactor open 8 Gn for 11 ms) || vibrations contactor closed 3 Gn, 5...300 Hz) || shocks contactor closed 10 Gn for 11 ms)
• Fire Resistance : 850 °C IEC 60695-2-1
• Contractual warranty
• Warranty : 18 months
• Environmental data
• Weee : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• Take-Back : No
• Carbon Footprint (Kg Co2 Eq, Total Life Cycle) : 62.35819718857974
• Packaging Made With Recycled Cardboard : Yes
• Environmental Disclosure : ENVPEP110205EN
• Packaging Without Single Use Plastic : Yes
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
• Circularity Profile : N/A
• Pvc Free : Yes
• Complementary
• Non-Overlap Time : 1.5 ms on de-energisation between NC and NO contact || 1.5 ms on energisation between NC and NO contact
• Minimum Switching Current : 5 mA for signalling circuit
• Power Dissipation Per Pole : 12.5 W AC-1 || 7.2 W AC-3 || 7.2 W AC-3e
• Average Impedance : 0.8 mOhm - Ith 125 A 50 Hz for power circuit
• Auxiliary Contact Composition : 1 NO + 1 NC
• Mounting Support : rail || plate
• Insulation Resistance : > 10 MOhm for signalling circuit
• Inrush Power In Va : 245-245 VA 60 Hz cos phi 0.75 (at 20 °C) || 245-245 VA 50 Hz cos phi 0.75 (at 20 °C)
• [Uimp] Rated Impulse Withstand Voltage : 8 kV IEC 60947
• Pole Contact Composition : 3 NO
• Connections - Terminals : control circuit: screw clamp terminals 2 1-2.5 mm² - cable stiffness: flexible with cable end || control circuit: screw clamp terminals 1 1-2.5 mm² - cable stiffness: flexible with cable end || control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: flexible without cable end || control circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: flexible without cable end || control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: solid without cable end || control circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: solid without cable end || power circuit: connector 1 4-50 mm² - cable stiffness: flexible without cable end || power circuit: connector 2 4-25 mm² - cable stiffness: flexible without cable end || power circuit: connector 1 4-50 mm² - cable stiffness: flexible with cable end || power circuit: connector 2 4-16 mm² - cable stiffness: flexible with cable end || power circuit: connector 1 4-50 mm² - cable stiffness: solid without cable end || power circuit: connector 2 4-25 mm² - cable stiffness: solid without cable end
• Coil Technology : without built-in suppressor module
• Maximum Operating Rate : 3600 cyc/h at 60 °C
• Auxiliary Contacts Type : mechanically linked 1 NO + 1 NC IEC 60947-5-1 || mirror contact 1 NC IEC 60947-4-1
• Hold-In Power Consumption In Va : 26-26 VA 60 Hz cos phi 0.3 (at 20 °C) || 26-26 VA 50 Hz cos phi 0.3 (at 20 °C)
• Overvoltage Category : III
• Maximum Horse Power Rating : 7.5 hp at 120 V AC 60 Hz for 1 phase motors || 15 hp at 230/240 V AC 60 Hz for 1 phase motors || 30 hp at 200/208 V AC 60 Hz for 3 phase motors || 30 hp at 230/240 V AC 60 Hz for 3 phase motors || 60 hp at 460/480 V AC 60 Hz for 3 phase motors || 60 hp at 575/600 V AC 60 Hz for 3 phase motors
• Motor Power Kw : 25 kW at 220...230 V AC 50 Hz (AC-3) || 45 kW at 380...400 V AC 50 Hz (AC-3) || 45 kW at 415...440 V AC 50 Hz (AC-3) || 55 kW at 500 V AC 50 Hz (AC-3) || 45 kW at 660...690 V AC 50 Hz (AC-3) || 15 kW at 400 V AC 50 Hz (AC-4) || 25 kW at 220...230 V AC 50 Hz (AC-3e) || 45 kW at 380...400 V AC 50 Hz (AC-3e) || 45 kW at 415...440 V AC 50 Hz (AC-3e) || 55 kW at 500 V AC 50 Hz (AC-3e) || 45 kW at 660...690 V AC 50 Hz (AC-3e)
• [Ui] Rated Insulation Voltage : power circuit 1000 V IEC 60947-4-1 || power circuit 600 V CSA || power circuit 600 V UL || signalling circuit 690 V IEC 60947-1 || signalling circuit 600 V CSA || signalling circuit 600 V UL
• Protective Cover : with
• [Ith] Conventional Free Air Thermal Current : 10 A (at 60 °C) for signalling circuit || 125 A (at 60 °C) for power circuit
• Control Circuit Voltage Limits : 0.8...1.1 Uc (-40-55 °C):operational AC 50 Hz || 0.85...1.1 Uc (-40-55 °C):operational AC 60 Hz || 0.3...0.6 Uc (-40-70 °C):drop-out AC 50/60 Hz || 1...1.1 Uc (55-70 °C):operational AC 50/60 Hz
• Control Circuit Type : AC 50/60 Hz
• Safety Reliability Level : B10d = 1.3 Mcycles contactor with nominal load EN/ISO 13849-1 || B10d = 20 Mcycles contactor with mechanical load EN/ISO 13849-1
• Pollution Degree : 3
• Rated Breaking Capacity : 1100 A at 440 V for power circuit conforming to IEC 60947
• Irms Rated Making Capacity : 1100 A at 440 V AC for power circuit conforming to IEC 60947 || 140 A AC for signalling circuit conforming to IEC 60947-5-1 || 250 A DC for signalling circuit conforming to IEC 60947-5-1
• Associated Fuse Rating : 10 A gG for signalling circuit conforming to IEC 60947-5-1 || 200 A gG at <= 690 V coordination type 1 for power circuit || 160 A gG at <= 690 V coordination type 2 for power circuit
• Operating Time : 20...35 ms closing || 6...20 ms opening
• Minimum Switching Voltage : 17 V for signalling circuit
• Signalling Circuit Frequency : 25...400 Hz
• Tightening Torque : control circuit 1.2 N.m screw clamp terminals flat Ø 6 mm || control circuit 1.2 N.m screw clamp terminals Philips No 2 || power circuit 12 N.m connector flat Ø 6 to Ø 8 mm || power circuit 12 N.m connector hexagonal 4 mm || control circuit 1.2 N.m screw clamp terminals pozidriv No 2
• Electrical Durability : 1.2 Mcycles 95 A AC-3 || 1.3 Mcycles 125 A AC-1 || 1.2 Mcycles 95 A AC-3e
• Mechanical Durability : 4 Mcycles
• Compatibility Code : LC1D
• [Icw] Rated Short-Time Withstand Current : 1100 A 40 °C - 1 s for power circuit || 800 A 40 °C - 10 s for power circuit || 400 A 40 °C - 1 min for power circuit || 135 A 40 °C - 10 min for power circuit || 140 A - 100 ms for signalling circuit || 120 A - 500 ms for signalling circuit || 100 A - 1 s for signalling circuit
• Heat Dissipation : 6-10 W at 50/60 Hz
• Specifications
• Country of Origin : Czechia
• Width : 85 mm
• Height : 127 mm
• Weight : 1.61 kg
• [Uc] Control Circuit Voltage : 380 V AC 50/60 Hz
• [Ue] Rated Operational Voltage : power circuit <= 690 V AC 25...400 Hz
• Contactor Application : resistive load || motor control
• Product Or Component Type : contactor
• Utilisation Category : AC-3 || AC-3e || AC-4 || AC-1
• [Ie] Rated Operational Current : 95 A (at <60 °C) at <= 440 V AC-3 for power circuit || 125 A (at <60 °C) at <= 1000 V AC-1 for power circuit || 95 A (at <60 °C) at <= 440 V AC-3e for power circuit
• Poles Description : 3P
• Range Of Product : TeSys Deca
• Range : TeSys
• Device Short Name : LC1D