This multi-circuit power meter is part of the PowerLogic EM4900 Series. This device is a multi-circuit power meters that make it easy to add many revenue-grade metering points. Without having to purchase, mount, wire and commission individual energy meters. This version measures current, voltage, power and energy consumption of up to 14 3-phase circuits with one board configuration. It offers Modbus RTU communications. Measurement accuracy is plus or minus 1 % with LVCT0xxxx0S split core, or plus or minus 0.5 % with LVCT2xxxx0S split core. The printed board can be installed in a panel. Mechanical dimensions of the base board are 226 mm in width, 146 mm in height and 71 mm in depth.

• Environment
• Ambient Air Temperature For Operation : 0-60 °C
• Standards : IEC 61010 || UL 508
• Net Weight : 1.5 kg
• Pollution Degree : 2
• Mounting Mode : wall mount
• Ambient Air Temperature For Storage : -40-70 °C
• Width : 288 mm
• Depth : 146 mm
• Installation Category : III
• Complementary
• Communication Port Support : RS485 screw block terminal
• Measurement Voltage : 150-480 V AC 50/60 Hz between phases || 90-277 V AC 50/60 Hz between phase and neutral
• Sampling Rate : 256 samples/cycle
• Communication Port Protocol : Modbus RTU 9600, 19200, 38400 bps even/odd or none - 2 or 4 wires
• Communication Service : updating firmware
• Communication Of Data : high current alarm || low current alarm || total energy || high-high current alarm || under voltage alarm || over voltage alarm || low-low current alarm
• Measurement Accuracy : power +/- 0.5 % of the measuring range || energy +/- 0.5 % of the measuring range || current +/- 0.5 % of the measuring range || voltage +/- 0.5 % of the measuring range
• Refresh Time : 2 s Modbus) || 14 s BACnet) || 20 s SNMP)
• Data Recording : maximum of demand active power || maximum of instantaneous current || maximum of demand current
• Analogue Input Type : solid core CT 0.333 V42 x single pole || solid core CT 0.333 V21 x single phase || solid core CT 0.333 V14 x three phase || split core CT 0.333 V42 x single pole || split core CT 0.333 V21 x single phase || split core CT 0.333 V14 x three phase
• Specifications
• Network Frequency : 50 Hz || 60 Hz
• Type Of Measurement : current per phase, rms || current average || phase angle || active power total || active power per phase || apparent power total || apparent power per phase || power factor average || power factor per phase || active energy
• Power Monitoring : basic instrumentation
• Product Or Component Type : multi-circuit energy meter
• Product Name : PowerLogic EM4900
• Range : PowerLogic
• Energy Management : sub billing and cost allocation || billing analysis
• [Us] Rated Supply Voltage : 100...277 V AC 50/60 Hz
• Device Application : sub billing
• Device Short Name : EM4914
• Metering Type : demand power P || demand current I1, I2, I3, peak demand current IM1, IM2, IM3
• Offer Sustainability
• Rohs Exemption Information : Yes
• Mercury Free : Yes
• Reach Regulation : Reference contains Substances of Very High Concern above the threshold
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Weee : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• Eu Rohs Directive : Compliant with Exemptions