VarPlus logic is a simple and efficient Power Controller for a automatic power factor correction equipment to maintain the power factor. It is a simple and intelligent relay which measures,monitor and Controls the reactive energy. It comes with Easy Commisioning , Step Size detection and monitoring along with the variour alarms. VPL12 can be used for 12 steps in a PFC equippment.

• Environmental data
• Packaging Made With Recycled Cardboard : Yes
• Environmental Disclosure : ENVPEP1509016_V1
• Packaging Without Single Use Plastic : Yes
• Weee : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• Minimum Percentage Of Recycled Plastic Content : 0
• Circularity Profile : ENVEOLI1509016_V1
• Take-Back : No
• Carbon Footprint (Kg Co2 Eq, Total Life Cycle) : 238.018629999999
• Complementary
• Number Of Quadrant Operation For Generator Application : 4
• Information Displayed : number of switching cycles per step || individual step size in kVAr || remaining step capacity in %
• [Us] Rated Supply Voltage : 90...550 V AC || <= 999 kV AC with external VT
• Height : 144 mm
• Type Of Alarms : step power loss < 75 %)message and alarm contact + step blocked || step faultymessage and alarm contact + step blocked || high current > 6 A CT)message and alarm contact || hunting (unstable regulation)message and alarm contact + step blocked || low current < 15 mA CT)message and alarm contact || overcompensationmessage and alarm contact || capacitor current overload (Irms/I1) > 130 % I1)message and alarm contact + step switched off || Over Temperature 50 °C)message and alarm contact + step switched off || Over Temperature 30 °C)fan switch || Over Voltage +/- 10 %)message and alarm contact + control stopped || total harmonic distortion > 7 %)message and alarm contact + step switched off
• Measurement Voltage : 90-550 V AC 50/60 Hz
• Input Function : switch 1 x dry contact
• Time Delay Range : 1...6500 s on reconnection) || 1...6500 s on response)
• Type Of Measurement : capacitor current overload Irms/I1 || individual voltage harmonic || power factor || operating time || cos φ || ambient temperature inside the cubicle || tan φ
• Operating Mode : manual or automatic
• Net Weight : 0.6 kg
• Input Type : phase to phase || phase to neutral || insensitive to CT polarity || insensitive to phase rotation polarity || current input CT...X/5 A and X/1 A
• Number Of Step Output Contacts : 12
• Measurement Current : 0-5 A
• Mounting Location : in cabinet
• Current Of Common : 10 A
• Metering Type : power factor and displacement PF (signed, four quadrant) || total current harmonic distortion THD (I) || power factor average over lifetime || temperature maximum || phase current I1, I2, I3 RMS on load || active power P, P1, P2, P3 on load || reactive power Q, Q1, Q2, Q3 on load || apparent power S, S1, S2, S3 on load || voltage U21, U32, U13, V1, V2, V3 on load
• Colour Code : front dark grey RAL 7016
• Output Type : control relay 0.2 A 110 V DC || control relay 1 A 48 V DC || control relay 2 A 400 V AC 50/60 Hz || control relay 1 A 24 V DC || control relay 5 A 250 V AC 50/60 Hz || control relay 5 A 120 V AC 50/60 Hz || fan 5 A 250 V AC 50/60 Hz || fan 1 A 48 V DC || alarm relay 5 A 250 V AC 50/60 Hz || alarm relay 1 A 48 V DC
• Device Connection : communication Modbus RS485
• Function Available : manual programming || automatic initialisation || automatic detection || advanced programming (expert) || any step sequence
• Mounting Mode : flush-mounted
• Settings Operating Mode : automatic || manual
• Cut-Out Dimensions : 138 x 138 mm
• Measurement Accuracy : voltage +/- 1 % || current +/- 1 % || frequency +/- 1 % || energy (P,Q,S) +/- 2 % || cos φ +/- 2 % || total voltage harmonic distortion THD (U) +/- 2 % || individual voltage harmonic +/- 3 % || Temperature +/- 3 °C
• Mechanical Durability : 65000 cycles without maintenance
• Service Life In Hours : 100000 h without maintenance
• Display Size : 56 x 25 mm
• Compatibility Code : VPL 12
• Data Recording : 5 alarms
• Provided Equipment : User Manual
• Width : 144 mm
• Display Type : Backlit LCD
• Depth : 58 mm
• Mounting Support : panel 1-3 mm
• Type Of Setting : choice of stepping programs auto || choice of stepping programs LIFO || choice of stepping programs linear || delay between 2 successive switch on the same step 5...1200 s || step configuration programming auto || step configuration programming off || step configuration programming fixed || target cos phi 0.7 inductive...0.7 capacitive || target cos phi dual cos φ
• Specifications
• Country of Origin : Germany
• Width : 144 mm
• Height : 144 mm
• Weight : 0.6 kg
• Product Or Component Type : power factor controller
• Product Name : PowerLogic PFC Controller
• Range : PowerLogic
• Device Short Name : VPL12
• Environment
• Product Certifications : EAC || NRTL || cNRTL || CE
• Ambient Air Temperature For Operation : -20-60 °C
• Standards : IEC 61000-6-4 || UL 61010-1 || EN 61010-1 || IEC 61000-6-2 || IEC 61326-1
• Ip Degree Of Protection : front face IP41 || rear face IP20
• Ambient Air Temperature For Storage : -40-85 °C
• Operating Altitude : <= 6561.68 ft (2000 m)