Wedge Expansion Anchor

ANCHOR - 1/2X4 1/4 WEDGE

RAW7423 7423 075352074238
1.03 / EA
http://schema.org/OutOfStock
Wedge Expansion Anchor
  • Anchor Size: 1/2 in, 1/4 in
  • Weight: 28 lb
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout-filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
QTY
  • Product Description
  • Features
  • Specifications
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout-filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
  • Head Styles
    • Threaded Stud
    • Rod Hanger
    • Tie-Wire
  • Approvals and Listings
    • Tested in accordance with ASTM E488 and AC01 criteria
    • FM Global (Factory Mutual) - File No. J.I. OK3A9.AH (see ordering information)
    • Underwriters Laboratory (UL Listed) - File No. EX1289 (see ordering information)
    • Federal GSA Specification
    • Meets the descriptive and proof load requirements of CID A-A-1923A, Type 4 (threaded version)
    • CalTrans listing for "Stud Mechanical Expansion Anchors"
  • Guide Specifications
    • CSI Divisions: 03151-Concrete Anchoring, 04081-Masonry Anchorage and 05090-Metal Fastenings. Expansion anchors shall be Power-Stud as supplied by Powers Fasteners, Inc., Brewster, NY.
  • Feature and Benefits
    • Fully threaded, heavy and medium duty all-purpose anchor
    • Nominal drill bit diameter same as anchor diameter (externally threaded version)
    • Length ID stamped on each threaded anchor
    • Anchors can be installed through the fixture, hole spotting not required
    • Chamfered impact section prevents damage to threads
    • Length of holes can be over-drilled or bottomless
    • Clip design prevents spinning during installation
  • General Applications and Uses
    • Lighting Standards and Base Plates
    • Sills and Support Ledgers
    • Structural Anchorage
    • Retrofit Projects and Machinery Anchorage
  • Suitable Base Materials
    • Normal-weight Concrete
    • Structural Lightweight Concrete
    • Grouted Concrete Masonry (CMU)
  • Product Specifications
    • Std. Box : 50
    • Anchor Size : 1/2" x 4 1/2"
    • Wt. /100(lbs.) : 28
    • FM or UL : FM/UL
    • Min. Embed. : 2 1/4"
    • Standard Carton : 200
  • Ordering Information
    • Anchor Materials : Zinc Plated Carbon Steel
    • Anchor Size Range (TYP.) : 1/4" diameter through 1-1/4" diameter