Nail Anchor

ANCHOR -MUSHRM HD 1/4X1-1/4 NA

RAW2842 2842 075352028422
0.30 / EA
http://schema.org/OutOfStock
Nail Anchor
  • Anchor Size: 1 1/4 in, 1 in, 1/4 ft, 1/4 in, 3/4 To 3 in
  • Drill Diameter: 1/4 in
  • Weight: 2.25 lb
The Zamac Hammer-Screw is a unique, one-step nail drive anchor featuring a Phillips type head and a screw thread for use in concrete, block, brick or stone. It is available in 1/4" diameter and lengths ranging from 3/4" to 3". With a body formed from corrosion resistant Zamac alloy and a zinc plated carbon steel or Perma-Seal™ coated drive screw, this anchor has been developed as an improvement over standard nailin anchors. The Zamac Hammer-Screw has been designed to provide a removable anchor with higher tension load capacities compared with traditional nailin when installed in concrete. The anchor is not recommended for overhead, life-safety or sustained tensile loading applications unless special considerations are given to the allowable loads (see performance data section).
QTY
  • Product Description
  • Features
  • Specifications
The Zamac Hammer-Screw is a unique, one-step nail drive anchor featuring a Phillips type head and a screw thread for use in concrete, block, brick or stone. It is available in 1/4" diameter and lengths ranging from 3/4" to 3". With a body formed from corrosion resistant Zamac alloy and a zinc plated carbon steel or Perma-Seal™ coated drive screw, this anchor has been developed as an improvement over standard nailin anchors. The Zamac Hammer-Screw has been designed to provide a removable anchor with higher tension load capacities compared with traditional nailin when installed in concrete. The anchor is not recommended for overhead, life-safety or sustained tensile loading applications unless special considerations are given to the allowable loads (see performance data section).
  • Anchor Materials
    • Zamac Alloy with Carbon Steel Drive
    • Screw or Perma-SealTM Coated
    • Carbon Steel Drive Screw
  • Guide Specifications
    • CSI Divisions: 03151-Concrete Anchoring, 04081-Masonry Anchorage and 05090- Metal Fastenings. Nail Anchors shall be Zamac Hammer-Screw anchors as supplied by Powers Fasteners, Inc., Brewster, NY.
  • Approvals And Listings
    • Federal GSA Specification Meets the proof load requirements of FF-S-325C, Group V, Type 2, Class 3, (superseded) and CID A-A 1925A, Type 1
  • Features And Benefits
    • General purpose anchoring
    • Installs in a variety of base materials
    • Removable anchor when screw is backed out with a Phillips head driver
  • Suitable Base Materials
    • Normal-weight Concrete
    • Hollow Concrete Masonry (CMU)
    • Brick Masonry
    • Stone
  • General Applications And Uses
    • Brick Ties and Masonry Anchorage
    • Electrical Fixtures
    • Signage
    • Drywall track
    • Maintenance
    • Surveillance equipment
  • Ordering Information
    • Anchor Size Range (TYP.) : 1/4" x 3/4" to 1/4" x 3" diameter
  • Product Specifications
    • Std. Box : 100
    • Drill Dia. : 1/4"
    • Anchor Size : 1/4' x 1 1/4"
    • Wt. /100(lbs.) : 2.25
    • Standard Carton : 500