primary_image

8 x 1/2 in. Wafer Head Phillips Sharp Point Drywall Screws - Steel Zinc - 1000qty

8 X 1/2 PHIL WAFER HD DRYWALL

MTLWDW1M WDW1M 639720270341
0.07 / Each
http://schema.org/OutOfStock
  • Country of Origin: MUL
  • Finish: Zinc
  • Height: 5.75 in
  • Length: 3.5 in, 88.9 mm
  • Material: Steel Zinc
  • Weight: 3.91 lb
  • Width: 3.5 in, 88.9 mm
These wafer head drywall screws offer an extra wide head and an extra sharp point used on thin metal less than .050” thick. The head is an integrally formed round washer with a low rounded top that is approximately 75% the diameter of the washer providing low clearance and an extra-large bearing surface. The steel zinc material provides superior corrosion resistance, dramatically increasing the lifespan of the fastener.
QTY
  • Product Description
  • Features
  • Specifications
These wafer head drywall screws offer an extra wide head and an extra sharp point used on thin metal less than .050” thick. The head is an integrally formed round washer with a low rounded top that is approximately 75% the diameter of the washer providing low clearance and an extra-large bearing surface. The steel zinc material provides superior corrosion resistance, dramatically increasing the lifespan of the fastener.
  • Additional Notes
    • Other sizes and quantities available by request | There is no single standard for self-piercing screw dimensions. These values are offered as a guide; deviations from these specifications may occur.
  • Features
    • 8 Diameter, 1/2" Length
    • Steel Zinc Material
    • Wafer Head with Phillips Drive
    • Includes Free Power Bit
    • The head design offers low clearance and an extra large bearing surface.
  • Kit Components
    • Power Bit
  • Specifications
    • Country of Origin : MUL
    • Length : 3.5 in
    • Width : 3.5 in
    • Height : 5.75 in
    • Weight : 3.91 lbs
    • Collection Folder : WDW1M
    • NPD Date Electrical : 01/06/2005 00:00:00
    • MATERIAL : Steel Zinc
    • Thread Type : UNF
    • Division : Electrical H1
    • Field Application : Electrical, Plumbing, Heating and Air Conditioning Industries
    • FINISH : Zinc
    • Sub-Division : Electrical-E H2
    • PRODUCT FAMILY : Electrical Supplies
    • Fastener Head Type : Wafer
    • Pack Type : Box
    • Screw Point Type : Sharp Point
    • Product Weight : 1774 g
    • Product Width : 88.9 MM
    • Product Height : 146.05 MM
    • IGCC : 2756
    • Product Series : WDW
    • Material Standard : AISI 1018 - 1022
    • NEURSPE : https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Wafer_Hd_Phil_Shp_Pt_Self-Pierce_Tap_Dry_Scr.pdf
    • Type : Self-Piercing & Tapping Drywall Screw
    • Order Minimum Imperial : 1000
    • ARRA Compliant : N
    • Order Minimum UOM Imperial : TH
    • Fastener Length : 2-Jan
    • Driver Size : #2
    • Torque : 45 Kg/cm minimum
    • Drive Type : Phillips
    • Fastener Head Height : 0.082 - 0.098 in.
    • Hardness : Rockwell C28-38
    • Language Code : EN
    • Buy American Compliant : No
    • Product Length : 88.9 MM
    • Fastener Head Width : 0.426 - 0.446 in.