primary_image

8 x 1 in. 1/4 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - 100qty

8 X 1 (1/4" HD) HEX WASHER SEL

MTLJTEKD14 JTEKD14 639720803488
0.15 / Each
http://schema.org/OutOfStock
Mayer-DDS-8 x 1 in. 1/4 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - 100qty-1
  • Country of Origin: MUL
  • Finish: Zinc
  • Height: 2.15 in
  • Length: 3 in, 76.2 mm
  • Material: Steel Zinc
  • Weight: 0.54 lb
  • Width: 3 in, 76.2 mm
These indented hex head self-drilling and tapping screws cut their own threads into a material without the use of a pilot hole. The indented head protects the drive area and reduces long-term wear. The steel zinc material provides superior corrosion resistance, dramatically increasing the lifespan of the fastener.
QTY
  • Product Description
  • Features
  • Specifications
These indented hex head self-drilling and tapping screws cut their own threads into a material without the use of a pilot hole. The indented head protects the drive area and reduces long-term wear. The steel zinc material provides superior corrosion resistance, dramatically increasing the lifespan of the fastener.
  • Additional Notes
    • Other sizes and quantities available by request. | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.
  • Features
    • 8 Diameter, 1" Length
    • Steel Zinc Material
    • 1/4 Indented Hex Head with Hex Drive
    • #2 Drill Point
    • Minimum torques are the same for stainless and steel self-drill screws. Drill time is 2.5 seconds for a 1 mm thick plate.
  • Specifications
    • Country of Origin : MUL
    • Length : 3 in
    • Width : 3 in
    • Height : 2.15 in
    • Weight : 0.54 lbs
    • Collection Folder : JTEKD14
    • NPD Date Electrical : 01/04/2005 00:00:00
    • MATERIAL : Steel Zinc
    • Division : Electrical H1
    • Field Application : Electrical, Plumbing, Heating and Air Conditioning Industries
    • FINISH : Zinc
    • Sub-Division : Electrical-E H2
    • PRODUCT FAMILY : Electrical Supplies
    • Fastener Head Type : Indented Hex
    • Pack Type : Jar
    • Screw Point Type : Drill Point
    • Product Weight : 245 g
    • Product Width : 76.2 MM
    • Product Height : 54.61 MM
    • IGCC : 2778
    • Torsional Strength : 42 lb-in minimum
    • Washer OD : 0.322 - 0.348 in.
    • Product Series : JTEKD
    • Material Standard : AISI 1016 - 1024
    • NEURSPE : https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Head_Self-Drill_TS_Indent_Hex_Washer.pdf
    • Type : Type BSD Self-Drilling & Tapping Screw
    • Thread Per Inch : 18
    • Drill Point Size : #2
    • Slot Depth : 0.052 - 0.066
    • Order Minimum Imperial : 100
    • ARRA Compliant : N
    • Order Minimum UOM Imperial : JR
    • Fastener Length : 1
    • Drive Type : Hex
    • Fastener Head Height : 0.096 - 0.11 in.
    • Dimensional Standard : ASME B18.6.3-2010
    • Hardness : Rockwell C32-40
    • Slot Width : 0.045 - 0.054
    • Width Across Corners : 0.272
    • Language Code : EN
    • Remarks : The catalog UPC differ from the tarnsaction daat spreadsheet UPC
    • Buy American Compliant : No
    • Panel Thickness : 0.035 - 0.100 IN
    • Product Length : 76.2 MM
    • Fastener Head Width : 0.244 - 0.25 in.
    • Thread Standard : SAE J78 - 2013
    • Washer Thickness : 0.019 - 0.031 IN