Digital AC/DC Voltage Tester 12 to 240V AC, 1.5 to 24V DC

ELECTRONIC AC/DC VOLTAGE TESTE

KLNET40 ET40 092644691836
25.48 / EA
http://schema.org/OutOfStock
Mayer-DDS-Digital AC/DC Voltage Tester 12 to 240V AC, 1.5 to 24V DC-2
  • Applications: Measures AC/DC Voltage
  • Depth: 5.240 in
  • Display Type: LED
  • Frequency: 50 Hz, 60 Hz
  • Height: 1.110 in
  • Material: PCB, Plastic
  • Voltage: -1.5 V, 12 V, 120 V, 24 V, 240 V, 9 V
  • Weight: 0.268 lb
  • Width: 1.520 in
Klein Tools ET40 is an Electronic AC/DC Voltage Tester. It measures AC voltages from 12V to 240V and DC voltages as low as 1.5V up to 24V. Tester also indicates positive and negative DC polarity.
QTY
  • Product Description
  • Features
  • Specifications
Klein Tools ET40 is an Electronic AC/DC Voltage Tester. It measures AC voltages from 12V to 240V and DC voltages as low as 1.5V up to 24V. Tester also indicates positive and negative DC polarity.
  • Features
    • Voltage Tester for AC voltages from 12V to 240V AC at four useful levels aligned with commonly used residential voltages
    • Tests DC voltages from 1.5V to greater than 17 to 24V at four useful levels aligned with commonly used DC voltages
    • Bright LEDs illuminate to indicate the type and level of voltage detected
    • Built to withstand a 9.8-Foot (3 m) drop
    • Indicates polarity when measuring DC voltages
    • Powers off automatically after approximately 2 minutes of non-use to conserve battery life
    • CAT III 250V, Class 2, Double insulation
    • Ingress protection IP41 dust and water resistant
    • Built-in test lead holders on sides of tester
    • Low battery indicator with easily accessible battery compartment
    • Pocket clip secures tester to pocket for reliable everyday carrying
    • Uses 2 x AAA batteries (included)
    • Identifies and distinguishes between AC or DC voltage
    • DC Polarity Indicators for DC Positive, DC Negative, and Both Illuminated for AC. Tests Low DC Voltage to 1.5V. Built in Test Lead Holders on Sides of Tester.
  • Warnings
    • Read, understand, and follow all instructions, cautions and warnings attached to and/or packed with all test and measurement devices before each use.
    • Before each use, verify tester operation by measuring a known voltage.
    • Never use the tester on a circuit with voltages that exceed the category based rating of this tester.
    • Always adhere to local and national safety codes. Use personal protective equipment to prevent shock and arc blast injury where hazardous live conductors are exposed.
    • Usage of this tester in any way other than that specified by the manufacturer can impair safe operation, resulting in severe injury or death.
  • Specifications
    • Drop Protection : 9.8' (3 m)
    • Ingress Protection : IP41
    • Display : Analog LED
    • Included : Tester, User Manual, Batteries
    • Pollution Degree : 2
    • Integral Lead Storage : Yes
    • Batteries : 2 x AAA
    • Control Type : ON/Off Switch for Power ON/OFF
    • Application : Measures AC/DC voltage
    • Standard : CATIII 250V, CE
    • Case Included : No
    • Material : Plastic Housing, PCB with Electronic Components
    • Frequency : 50/60 Hz
    • Voltage : AC Level Indicators - 12V, 24V, 120V, 240V and DC Indicators -1.5V, 9V, 12V, >17-24V
    • Tests Continuity : No
    • Interchangeable Leads : No
    • Accuracy : Approximately 70 to 100% of Indicated Voltage, Except for 2V DC (84 to 100%) and >17V DC (94 to 100% of 17V)
    • Overall Width (Inch) : 1.11
    • Weight (oz) : 2.3
    • Overall Height (Inch) : 1.52
    • Overall Length (Inch) : 5.24
    • Overall Width (cm) : 2.8
    • Overall Height (cm) : 3.9
    • Overall Length (cm) : 13.3
    • Weight (g) : 65
    • Height : 1.1100 in
    • Width : 1.5200 in
    • Depth : 5.2400 in
    • Weight : 0.2680 lbs