Fluke 1587 FC Insulation Multimeter

Fluke 1587 FC Insulation Multimeter

FLKFLUKE1587FC FLUKE-1587-FC 95969796620
1203.09 / Carton
http://schema.org/OutOfStock
Mayer-DDS-Fluke 1587 FC Insulation Multimeter-1
  • Operating Temperature: -20 To 55 °C, -4 To 131 °F
  • Storage Temperature: -40 To 140 °F, -40 To 60 °C
Troubleshoot advanced problems, perform preventive and predictive maintenance tasks in real time, to identify insulation breakdown using only one simple-to-use tool for years. Developed for commercial and industrial applications, this the only meter that gives you a high-performance DMM, a state-of-the-art insulation tester, and wireless connectivity for sharing and tracking results all in one unit.
QTY
  • Features
  • Specifications
  • Other Useful Features
    • Safety first. Keep yourself out of harm’s way by monitoring your test measurements remotely.
    • Prove your job is done right by quickly seeing and sharing measurement results wirelessly with your smartphone.
    • Quickly find problems by saving and comparing measurements over time on a wireless device.
    • PI/DAR timed ratio tests with TrendIt™ graphs to identify moisture and contaminated insulation problems faster
    • Memory storage through Fluke Connect that saves measurements to your phone or the cloud and eliminates the need to write down results. Reduces errors and saves data for historical tracking over time
    • Temperature compensation to establish accurate baselines and relevant historical comparisons
    • Historical tracking and trending of assets to identify insulation degradation over time and allow real-time decisions to be made in the field with Fluke Connect® Assets (sold separately)
    • Provides memory storage through Fluke Connect Measurements to eliminate the need to write down results
    • Includes live circuit detection to prevent insulation test if voltage >30 V is detected
    • Supports historical tracking and asset trending of assets to identify degradation over time with Fluke Connect® Assets (sold separately)
    • Incorporates VFD low-pass filter for accurate variable frequency motor drive measurements
    • Includes auto-discharge of capacitive voltage for added user protection
    • Measures ac/dc voltage, dc millivolts, ac/dc milliamps, resistance, and continuity
    • Includes capacitance, diode test, temperature, min/max, frequency measurements and insulation test smoothing reading
    • Automatically powers off to save battery power
    • Comes with remote probe, test leads, alligator clips, K-type thermocouple, hard case, and three-year warranty.
  • Product Overview
    • Fluke Connect + Fluke's 1587 FC Insulation Multimeter helps you identify tough problems, fix, and wirelessly communicate your work quickly and easily - all at a safe distance.
    • The Fluke 1587 FC is Fluke Connect-enabled so you can download the free Fluke Connect® Measurements app to your smartphone and gain additional functions, including:
    • Useful resources and rugged tools for Solar professionals
  • Key Features
    • Safety first. Connect the insulation tester then keep yourself out of harm's way by monitoring your test measurements remotely.
    • Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
    • Quickly find problems by saving and comparing measurements over time on a wireless device.
  • Specifications
    • 600.0 mV Resolution : 0.1 mV || 0.1 mV
    • 600.0 mV : Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3) || Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts): ±(2% + 3) || Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3) || Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts): +(2% + 3), -(6% - 3)
    • 6.000 V Resolution : 0.001 V || 0.001 V
    • 6.000 V : Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3) || Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts): ±(2% + 3) || Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3) || Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts): +(2% + 3), -(6% - 3)
    • 60.00 V Resolution : 0.01 V || 0.01 V
    • 60.00 V : Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3) || Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts): ±(2% + 3) || Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3) || Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts): +(2% + 3), -(6% - 3)
    • 600.0 V Resolution : 0.1 V || 0.1 V
    • 600.0 V : Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3) || Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts): ±(2% + 3)¹ || Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3) || Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts): +(2% + 3), -(6% - 3) || V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz: 100.0 V || V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz: - || DC Trigger Levels¹ to 20 kHz²: 12.0 V and 40.0 V
    • 1000 V Resolution : 1 V || 1 V
    • 1000 V : Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(2% + 3) || Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts): ±(2% + 3)¹ || Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(2% + 3) || Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts): +(2% + 3), -(6% - 3)
    • Range Resolution : Accuracy ±(% of Rdg + Counts) || Accuracy ±(% of Rdg + Counts) || Accuracy +(% of Rdg+Counts)¹ || Accuracy ±(% of Rdg+Counts) || Accuracy ±(% of Rdg+Counts) || Accuracy ±(% of Rdg+Counts)¹
    • 6.000 V dc : 0.001 V: ±(0.09% + 2)
    • 60.00 V dc : 0.01 V: ±(0.09% + 2)
    • 600.0 V dc : 0.1 V: ±(0.09% + 2)
    • 1000 V dc : 1 V: ±(0.09% + 2)
    • Input impedance : 10 MΩ (nominal), <100 pF: 10 MΩ (nominal), <100 pF
    • Normal mode rejection ratio : >60 dB @ 50 Hz or 60 Hz: >60 dB @ 50 Hz or 60 Hz
    • Common mode rejection ratio : >120 dB @ dc, 50 Hz or 60 Hz (1 k unbalance): >120 dB @ dc, 50 Hz or 60 Hz (1 k unbalance)
    • 600.0 mVdc : 0.1 mV: ±(0.1% + 1)
    • Range : 400 mA: 400 mA || 60 mA: 60 mA || 400 mA: 400 mA || 60 mA: 60 mA
    • Resolution : 0.1 mA: 0.1 mA || 0.01 mA: 0.01 mA || 0.1 mA: 0.1 mA || 0.01 mA: 0.01 mA
    • Accuracy ±(% of Rdg+Counts) ±(1.5% + 2)¹ : ±(1.5% + 2)¹ || ±(1.5% + 2)¹
    • Burden voltage (Typical) : 2 mV/mA: 2 mV/mA || 2 mV/mA: 2 mV/mA || 2 mV/mA: 2 mV/mA || 2 mV/mA: 2 mV/mA
    • Accuracy ±(% of Rdg+Counts) ±(0.2% + 2) : ±(0.2% + 2) || ±(0.2% + 2)
    • Overload : 600 mA for 2 minutes maximum: 600 mA for 2 minutes maximum
    • Fuse protection for mA input : 0.44 mA, 1000 V, IR 10 kA: 0.44 mA, 1000 V, IR 10 kA || 0.44A, 1000 V, IR 10 kA: 0.44A, 1000 V, IR 10 kA
    • AC conversion : Inputs are ac-coupled and calibrated to the rms value of sine wave input: Inputs are ac-coupled and calibrated to the rms value of sine wave input
    • 600.0 Ω : 0.1 Ω: ±(0.9% + 2)
    • 6.000 kΩ : 0.001 kΩ: ±(0.9% + 2)
    • 60.00 kΩ : 0.01 kΩ: ±(0.9% + 2)
    • 600.0 kΩ : 0.1 KΩ: ±(0.9% + 2)
    • 6.000 MΩ : 0.001 MΩ: ±(0.9% + 2)
    • 50.0 MΩ ² : 0.01 MΩ: ±(1.5% + 3)
    • Overload protection : 1000 V rms or dc: 1000 V rms or dc || 1000 V rms: 1000 V rms
    • Open circuit test voltage : <8.0 V dc: <8.0 V dc
    • Short circuit current : <1.1 mA: <1.1 mA || 1.0 mA typical: 1.0 mA typical
    • Diode test indication : Display voltage drop: 0.6 V at1.0 mA nominal test current:: Display voltage drop: 0.6 V at1.0 mA nominal test current:
    • Accuracy ±(2% + 3) : ±(2% + 3)
    • Continuity indication : Continuous audible tone for testresistance below 25 Ω and off above 100 Ω. Maximum Reading; 1000 Ω: Continuous audible tone for testresistance below 25 Ω and off above 100 Ω. Maximum Reading; 1000 Ω
    • Open circuit voltage : <8.0 V: <8.0 V
    • Response time >1 m sec : >1 m sec
    • 99.99 Hz : 0.01 Hz: ±(0.1% + 1)
    • 999.9 Hz : 0.1 Hz: ±(0.1% + 1)
    • 9.999 kHz : 0.001 kHz: ±(0.1% + 1)
    • 99.99 kHz : 0.01 kHz: ±(0.1% + 1)
    • 600.0 mV ac : V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz: 100.0 mV || V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz: 150.0 mV || DC Trigger Levels¹ to 20 kHz²: NA
    • 6.0 V : V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz: 1.0 V || V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz: 1.5 V || DC Trigger Levels¹ to 20 kHz²: -400.0 mV and 2.5 V
    • 60.0 V : V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz: 10.0 V || V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz: 36.0 V || DC Trigger Levels¹ to 20 kHz²: 1.2 V and 4.0 V
    • 1000.0 V : V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz: 300.0 V || V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz: - || DC Trigger Levels¹ to 20 kHz²: 12.0 V and 40.0 V
    • 1000 nF 1 nF : ±(1.2% + 2)
    • 10.00 μF 0.01 μF : ±(1.2% + 2)
    • 100.0 μF 0.1 μF : ±(1.2% ±90 counts)
    • 9999 μF 1 μF : ±(1.2% ±90 counts)
    • -40 ° C to 537 ° C : 0.1 °C: ±(1% + 10 counts)
    • -40 ° F to 998 ° F : 0.1 °F: ±(1% + 18 counts)
    • Measurement range : 0.01 MΩ to 2 GΩ: 0.01 MΩ to 2 GΩ
    • Test voltages : 50, 100, 250, 500, 1000 V: 50, 100, 250, 500, 1000 V
    • Test voltage accuracy +20%, -0% : +20%, -0%
    • Short-circuit test current : 1 mA nominal: 1 mA nominal
    • Auto discharge Discharge time <0.5 second for C = 1 μF or less : Discharge time <0.5 second for C = 1 μF or less
    • Live circuit detection : Inhibit test if terminal voltage > 30 V prior to initialization of test: Inhibit test if terminal voltage > 30 V prior to initialization of test
    • Maximum capacitive load Operable with up to 1 μF load : Operable with up to 1 μF load
    • 50 V (0% to +20%) Display range : 0.01 to 6.00 MΩ || 6.0 to 50.0 MΩ
    • 50 V (0% to +20%) Resolution : 0.01 MΩ || 0.1 MΩ
    • 50 V (0% to +20%) Test current : 1 mA @ 50 kΩ || 1 mA @ 50 kΩ
    • 50 V (0% to +20%) Resistance accuracy ±(% of Rdg + Counts) : ±(3% + 5 counts) || ±(3% + 5 counts)
    • 100 V (0% to +20%) Display range : 0.01 to 6.00 MΩ || 6.0 to 60.0 MΩ || 60 to 100 MΩ
    • 100 V (0% to +20%) Resolution : 0.01 MΩ || 0.1 MΩ || 1 MΩ
    • 100 V (0% to +20%) Test current : 1 mA @ 100 kΩ || 1 mA @ 100 kΩ || 1 mA @ 100 kΩ
    • 100 V (0% to +20%) Resistance accuracy ±(% of Rdg + Counts) : ±(3% + 5 counts) || ±(3% + 5 counts) || ±(3% + 5 counts)
    • 250 V (0% to +20%) Display range : 0.1 to 60.0 MΩ || 60 to 250 MΩ
    • 250 V (0% to +20%) Resolution : 0.1 MΩ || 1 MΩ
    • 250 V (0% to +20%) Test current : 1 mA @ 250 kΩ || 1 mA @ 250 kΩ
    • 250 V (0% to +20%) Resistance accuracy ±(% of Rdg + Counts) : ±(1.5% + 5 counts) || ±(1.5% + 5 counts)
    • 500 V (0% to +20%) Display range : 0.1 to 60.0 MΩ || 60 to 500 MΩ
    • 500 V (0% to +20%) Resolution : 0.1 MΩ || 1 MΩ
    • 500 V (0% to +20%) Test current : 1 mA @ 500 kΩ || 1 mA @ 500 kΩ
    • 500 V (0% to +20%) Resistance accuracy ±(% of Rdg + Counts) : ±(1.5% + 5 counts) || ±(1.5% + 5 counts)
    • 1000 V (0% to +20%) Display range : 0.1 to 60.0 MΩ || 60 to 600 MΩ || 0.6 to 2.0 GΩ
    • 1000 V (0% to +20%) Resolution : 0.1 MΩ || 1 MΩ || 100 MΩ
    • 1000 V (0% to +20%) Test current : 1 mA @ 1 MΩ || 1 mA @ 1 MΩ || 1 mA @ 1 MΩ
    • 1000 V (0% to +20%) Resistance accuracy ±(% of Rdg + Counts) : ±(1.5% + 5 counts) || ±(1.5% + 5 counts) || ±(10% + 3 counts)
    • Maximum voltage applied to any terminal and common : 1000 V: 1000 V
    • Storage temperature : -40 °C to 60 °C (-40 °F to 140 °F): -40 °C to 60 °C (-40 °F to 140 °F)
    • Operating temperature : -20 °C to 55 °C (-4 °F to 131 °F): -20 °C to 55 °C (-4 °F to 131 °F)
    • Temperature coefficient : 0.05 x (specified accuracy) per °C for temperatures <18 °C or >28 °C (<64 °F or >82 °F): 0.05 x (specified accuracy) per °C for temperatures <18 °C or >28 °C (<64 °F or >82 °F)
    • Relative humidity : Noncondensing: Noncondensing || 0% to 95% @ 10 °C to 30 °C (50 °F to 86 °F): 0% to 95% @ 10 °C to 30 °C (50 °F to 86 °F) || 0% to 75% @ 30 °C to 40 °C (86 °F to 104 °F): 0% to 75% @ 30 °C to 40 °C (86 °F to 104 °F) || 0% to 40% @ 40 °C to 55 °C (104 °F to 131 °F): 0% to 40% @ 40 °C to 55 °C (104 °F to 131 °F)
    • Vibration : Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument: Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument
    • Radio frequency communication : 2.4 GHz ISM Band: 2.4 GHz ISM Band
    • Radio frequency certification FCC: T68-FBLE, IC: 6627A-FBLE : FCC: T68-FBLE, IC: 6627A-FBLE
    • International IEC 61326-1:Portable Electromagnetic Environment; IEC 61326-2-2 CISPR 11: Group 1, Class A : IEC 61326-1:Portable Electromagnetic Environment; IEC 61326-2-2 CISPR 11: Group 1, Class A
    • International : Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself.: Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself. || Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purposes. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances.: Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purposes. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances. || Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object. The equipment may not meet the immunity requirements of this standard when test leads and/or test probes are connected.: Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object. The equipment may not meet the immunity requirements of this standard when test leads and/or test probes are connected.
    • Korea (KCC) : Class A Equipment (Industrial Broadcasting & Communication Equipment): Class A Equipment (Industrial Broadcasting & Communication Equipment) || Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.: Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.
    • USA (FCC) 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103. : 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.
    • Enclosure protection : IEC 60529: IP40 (non-operating): IEC 60529: IP40 (non-operating)
    • IEC 61010-1 Pollution Degree 2 : Pollution Degree 2
    • IEC 61010-2-033 : CAT IV 600 V / CAT III 1000 V: CAT IV 600 V / CAT III 1000 V
    • Batteries Four AA batteries (IEC LR6) : Four AA batteries (IEC LR6)
    • Battery life : Meter use 1000 hours; Insulation test use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.: Meter use 1000 hours; Insulation test use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
    • Size (H x W x L) : 5.0 x 10.0 x 20.3 cm (1.97 x 3.94 x 8.00 in): 5.0 x 10.0 x 20.3 cm (1.97 x 3.94 x 8.00 in)
    • Weight 550 g (1.2 lb) : 550 g (1.2 lb)
    • Altitude : Operating: 2000 m
    • Altitude Storage : 12,000 m
    • Over-range capability 110% of range except for capacitance which is 100% : 110% of range except for capacitance which is 100%
    • Frequency overload protection : <107 V Hz: <107 V Hz