3M Cold Shrink Insulator 8427-12, 250-400 kcmil (125-200 mm²), 10 per case

3M Cold Shrink Insulator 8427-12, 250-400 kcmil (125-200 mm²), 10 per case

MMM842712 8427-12 054007344599
35.89 / Each
Mayer-3M Cold Shrink Insulator 8427-12, 250-400 kcmil (125-200 mm²), 10 per case-1
  • Conductor Size: 250 MCM, 300 MCM, 350 MCM, 400 MCM
  • Length: 12 in, 305 mm
  • Material: EPDM-rubber
  • Number of Conductors: 1
  • Product Type: Splice
  • Splice Type: Cold Shrink
  • Units Per Case: 10
  • Voltage: 1 kV
3M™ Cold Shrink Connector Insulators 8420 and 8430 Series are designed using 3M’s proprietary cold shrink delivery system. Products are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwinding) after positioning the splice allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated EPDM material promotes a permanent, durable environmental seal and insulation, with a typical operating temperature range from -40–194°F (-40–90°C). The 8420 insulator meets requirements of ANSI C119-1 and Western Underground Guide 2.14 for secondary splices rated up to 1 kV. Applications: Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splicing rated to 1000 V. Good for repairs and environmental sealing for communication and other non-electrical applications. Important: Use insulation jacket or connector O.D. for final ordering criteria. * Mastic pads included for cable O.D. build-up. ** Kit contains adapters. *** These sizes are listed for availability only and are not designed to be used as primary insulation. These tubes are for conduit sealing and breakouts. ****Maximum connector length: 5.625” “Point of Purchase” packaging designated by “P”. Example: 8423-6P
  • Features
  • Specifications
  • ANSI Certified and RoHS 2011/65/EU Compliant
  • Accommodates 250 to 400 kcmil conductor sizes
  • Suitable for insulating secondary splices, direct-buried or submersible and dig-in repairs
  • Withstands temperatures of -40 to 194 degrees F (-40 to 90 degrees C)
  • Simple installation which requires no tools
  • 10/case
  • Insulates cable or connectors within a diameter range of 0.67 - 1.38 in (16,8 - 35,1 mm)
  • Made of EPDM rubber which contains no chlorides or sulfur
  • Environmental sealing for communication and other non-electrical applications
  • Specially designed for primary insulation of solid dielectric insulated wires and cable splicing rated to 1000 volts
  • 3M™ 8420 Connector Insulator is designed for use on all solid dielectric insulated wires and cable splices. This cold shrink insulator offers moisture-tight sealing while maintaining its prolonged resiliency and pressure. It is ideal for insulating secondary splices, direct-buried or submersible, dig-in repairs and physical protection of high-voltage, air-insulated connectors or lugs. ANSI Certified and RoHS 2011/65/EU Compliant.
  • 3M™ 8420 Cold Shrink Connector Insulator is an open-ended, tubular sleeve that provides ozone, acids and alkalis resistance. This environmental sealing insulator offers primary electrical insulation for 1 kV-rated applications. The tough, durable, EPDM rubber construction makes the insulator withstand operating temperatures of -40 to 194 degrees F (-40 to 90 degrees C).
  • Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
  • Manufacturing Origin: USA
  • The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
  • Product Type : Splice
  • Trademark : 3M
  • Inner Diameter After Heat-Shrink : 16.8 mm
  • Maximum Connector Length : 8.0 in
  • Case Quantity : 10
  • Cable Type : Non-Shieled, Solid Dielectric Power Cable
  • Inner Diameter Before Heat-Shrink : 35.1 mm
  • RoHS 2011/65/EU Compliant : RoHS 2011/65/EU Compliant, Yes
  • Applications : Insulation, mechanical protection, repair
  • Material : EPDM-rubber
  • Color : Black
  • Conductor Material : Aluminum, Copper
  • Splice Type : Cold Shrink
  • Maximum Connector Length (metric) : 203.2 mm
  • Length : 12 Inch
  • Voltage : 1 kV
  • Length (Metric) : 305 mm
  • Voltage Application : Low Voltage
  • 3M ID : 80610134035
  • Number of Conductors : 1
  • RoHS EU Comments : RoHS 2011/65/EU compliant without exemption
  • Shielding Type : Non-shielded, Tape Shield, UniShield®, Wire Shield
  • Conductor Sizes : 250 kcmil, 300 kcmil, 350 kcmil, 400 kcmil
  • Brand : 3M