3M Cold Shrink Insulator 8426-9, 2/0 AWG-250 kcmil (70-125 mm²), 10 per case

3M Cold Shrink Insulator 8426-9, 2/0 AWG-250 kcmil (70-125 mm²), 10 per case

MMM84269 8426-9 054007344575
24.05 / Each
  • Conductor Size: 2/0 AWG, 250 MCM, 3/0 AWG, 4/0 AWG
  • Number of Conductors: 1
  • Product Type: Splice
  • Splice Type: Cold Shrink
  • Units Per Case: 10
  • Voltage: 1 kV
3M™ Cold Shrink Connector Insulators 8420 and 8430 Series are designed using 3M’s proprietary cold shrink delivery system. Products are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwinding) after positioning the splice allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated EPDM material promotes a permanent, durable environmental seal and insulation, with a typical operating temperature range from -40–194°F (-40–90°C). The 8420 insulator meets requirements of ANSI C119-1 and Western Underground Guide 2.14 for secondary splices rated up to 1 kV. Applications: Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splicing rated to 1000 V. Good for repairs and environmental sealing for communication and other non-electrical applications. Important: Use insulation jacket or connector O.D. for final ordering criteria. * Mastic pads included for cable O.D. build-up. ** Kit contains adapters. *** These sizes are listed for availability only and are not designed to be used as primary insulation. These tubes are for conduit sealing and breakouts. ****Maximum connector length: 5.625” “Point of Purchase” packaging designated by “P”. Example: 8423-6P
  • Features
  • Specifications
  • Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
  • The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
  • Manufacturing Origin: USA
  • 3M™ 8420 Connector Insulator is designed for use on all solid dielectric insulated wires and cable splices. This cold shrink insulator offers moisture-tight sealing while maintaining its prolonged resiliency and pressure. It is ideal for insulating secondary splices, direct-buried or submersible, dig-in repairs and physical protection of high-voltage, air-insulated connectors or lugs. ANSI Certified and RoHS 2011/65/EU Compliant.
  • Accommodates 2/0 AWG to 250 kcmil conductor sizes
  • Specially designed for primary insulation of solid dielectric insulated wires and cable splicing rated to 1000 volts
  • Withstands temperatures of -40 to 194 degrees F (-40 to 90 degrees C)
  • Insulates cable or connectors within a diameter range of 0.55 - 1.18 in (13,9 - 30,1 mm)
  • Suitable for insulating secondary splices, direct-buried or submersible and dig-in repairs
  • 10/case
  • ANSI Certified and RoHS 2011/65/EU Compliant
  • Simple installation which requires no tools
  • Made of EPDM rubber which contains no chlorides or sulfur
  • Environmental sealing for communication and other non-electrical applications
  • 3M™ 8420 Cold Shrink Connector Insulator is an open-ended, tubular sleeve that provides ozone, acids and alkalis resistance. This environmental sealing insulator offers primary electrical insulation for 1 kV-rated applications. The tough, durable, EPDM rubber construction makes the insulator withstand operating temperatures of -40 to 194 degrees F (-40 to 90 degrees C).
  • Voltage : 1 kV
  • RoHS EU Comments : RoHS 2011/65/EU compliant without exemption
  • 3M ID : 80610927669
  • Maximum Connector Length (metric) : 127.0 mm
  • Product Type : Splice
  • Shielding Type : Non-shielded, Tape Shield, UniShield®, Wire Shield
  • RoHS 2011/65/EU Compliant : RoHS 2011/65/EU Compliant, Yes
  • Inner Diameter After Heat-Shrink : 13.9 mm
  • Trademark : 3M
  • Cable Type : Power Cable
  • Brand : 3M
  • Conductor Sizes : 2/0 AWG, 250 kcmil, 3/0 AWG, 4/0 AWG
  • Splice Type : Cold Shrink
  • Conductor Material : Aluminum, Copper
  • Number of Conductors : 1
  • Inner Diameter Before Heat-Shrink : 30.1 mm
  • Maximum Connector Length : 5.0 in
  • Case Quantity : 10