integrated drive ILS with stepper motor - 24..36V- pulse/direction w/o RS422- 5A

integrated drive ILS with stepper motor - 24..36V- pulse/direction w/o RS422- 5A

SQDILS1V852PB1A0 ILS1V852PB1A0 3389119227759
1381.98 / EA
http://schema.org/OutOfStock
  • Country of Origin: Germany
  • Length: 6.72 in
  • Motor Type: 3-phase Stepper Motor
  • Shaft Diameter: 12 mm
  • Shaft End: Untapped
  • Shaft Length: 30 mm
  • Warranty Length: 18 mth
This product is part of the Lexium ILA, ILE, ILS range, an offer of integrated drives for motion control. This is an integrated drive with a stepper motor, without gearbox, without holding brake. The feedback is given by an index pulse. Its nominal speed
QTY
  • Product Description
  • Features
  • Specifications
This product is part of the Lexium ILA, ILE, ILS range, an offer of integrated drives for motion control. This is an integrated drive with a stepper motor, without gearbox, without holding brake. The feedback is given by an index pulse. Its nominal speed
  • Supply Voltage Description
    • single phase 24 V DC
    • single phase 36 V DC
  • Communication Interface
    • pulse/direction 5 V without RS422, Integrated
  • Current Consumption
    • 5000 mA maximum continuous
  • Nominal Speed
    • 100 rpm 24 V
    • 200 rpm 36 V
  • Discrete Input Current
    • 10-10 mA at 24 V safety input
  • Speed Feedback Resolution
    • 1.8°, 0.9°, 0.72°, 0.36°, 0.18°, 0.09°, 0.072°, 0.036°
    • 200, 400, 500, 1000, 2000, 4000, 5000, 10000 steps
  • Prop 65
    • WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • Standards
    • IEC 50347
    • IEC 61800-3
    • IEC 50178
    • EN 61800-3 : 2001-02
    • EN 61800-3:2001, second environment
    • IEC 60072-1
    • IEC 61800-3, Ed 2
  • Ip Degree Of Protection
    • IP41 shaft bushing: conforming to IEC 60034-5
    • IP54 total except shaft bushing: conforming to IEC 60034-5
    • IP54 total except shaft bushing: conforming to IEC 60034-
  • Maximum Switching Current
    • 100 mA per output
    • 200 mA total
  • Protection Type
    • overload of output voltage
    • short circuit of the output voltage
    • safe torque off
  • Accessories
    • VW3L10000N10
    • VW3L10100N2
  • Vibration Resistance
    • 20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
  • Relative Humidity
    • 15-85 % without condensation
  • Us Rated Supply Voltage
    • 36 V
    • 24 V
  • Service Life In Hours
    • 20000 h bearing
  • Maximum Axial Force Fa
    • 170 N tensile force)
    • 30 N force pressure)
  • Operating Altitude
    • <= 3280.84 ft (1000 m) without derating
  • Shock Resistance
    • 150 m/s² 1000 shocks IEC 60068-2-29
  • Ambient Air Temperature For Operation
    • 50-65 °C (with power derating of 2 % per °C)
    • 0-50 °C (without derating)
  • Permissible Ambient Air Temperature Around The Device
    • 105 °C power amplifier
    • 110 °C motor
  • Product Certifications
    • UL
    • cUL
    • TÜV
  • Physical Attributes
    • Motor Flange Size : 85 mm
    • Shaft Length : 30 mm
  • Complementary Attributes
    • Maximum Mechanical Speed : 1500 rpm
    • Maximum Radial Force Fr : 100 N
  • Important Information Attributes
    • Local Data Status : Publishable
    • Local Publishable Date : 7/10/2025
    • Device Type : Motion - integrated drive
    • Serviceability : Yes
    • Traceability : Yes
    • Field Service Division : IDIBS
    • Average Life Duration : 15 year(s)
    • Legacy WEEE Scope : In
    • WEEE Product Category : 5
    • Scope Perimeter : At least in Europe
    • EOLI Availability Display : Yes
    • End Of Life Doc Ref : ENVEOLI1411002EN
    • Reach Full Compliance Status : Reference contains Substances of Very High Concern above the threshold
    • Reach Full Compliance Status Id : CONTAINS_SVHC
    • Reach Compliance Directive : Reference contains Substances of Very High Concern above the threshold
    • ROHS Eur In Scope : No
    • ROHS Eur Status : Compliant with Exemptions
    • ROHS Eur Conformity Date : 1907
    • ROHS Eur Full Compliance Status : Pro-active compliance (Product out of EU RoHS legal scope)
    • ROHS Eur Full Compliance Status Id : PRO_ACTIVE_COMPLIANCE
    • China ROHS In Scope : Yes
    • China ROHS Label : 5
    • With Recycled Cardboard : Yes
    • Without Single Use Plastic : No
    • Product Contributes To Saved And Avoided Emissions : No
    • Return Indicator : N
    • WD Status : 5 - INITIALIZED WITH DataSCAN OK (Migration)
    • Associated Fuse Rating : 10:00 AM
    • Centring Collar Diameter : 60 mm
    • Circle Diameter Of The Mounting Holes : 99 mm
    • Coefficient 1 0 : 50.236 N.m
    • Coefficient 1 1 : -42.97 N.m/rpm
    • Coefficient 1 2 : 12.355 N.m/rpm²
    • Coefficient 1 3 : -1.19 N.m/rpm3
    • Coefficient 2 0 : 14.141 N.m
    • Coefficient 2 1 : 1.322 N.m/rpm
    • Coefficient 2 2 : -4.065 N.m/rpm²
    • Coefficient 2 3 : 0.719 N.m/rpm3
    • Compatibility Code : ILS
    • Continuous Stall Torque : 4 N.m
    • Curve Type : semilog
    • Device Short Name : ILS
    • Electrical Connection : printed circuit board connector
    • Feedback Type : index pulse
    • Gear Box Type : without
    • Holding Brake : without
    • Holding Torque : 4 N.m
    • Marking : CE
    • Motor Type : 3-phase stepper motor
    • Mounting Holes Diameter : 6.5 mm
    • Mounting Support : flange
    • Network Number Of Phases : 1
    • Network Type : DC
    • Nominal Torque : 4 N.m
    • Number Of Motor Poles : 6
    • Number Of Motor Stacks : 2
    • Number Of Mounting Holes : 4
    • Package Weight Lbs : 4.0 kg
    • Peak Stall Torque : 4 N.m
    • Phase : single phase
    • Product Availability : Non-Stock - Not normally stocked in distribution facility
    • Product Or Component Type : motion integrated drive
    • Range Of Product : Lexium integrated drive
    • Returnability : No
    • Rotor Inertia : 2.2 kg.cm²
    • Second Shaft : without second shaft end
    • Shaft Diameter : 12 mm
    • Shaft End : untapped
    • Sizing Reference : ILS1_852P
    • Supply Voltage Limits : 18-40 V
    • Sustainable Packaging : No
    • Type Of Cooling : natural convection
    • Voltage 1 : 24 V
    • Voltage 1 Speed 1 : 105.87 rpm
    • Voltage 1 Speed 1 Max : 105.87 rpm
    • Voltage 2 : 36 V
    • Voltage 2 Speed 2 : 235.918 rpm
    • Voltage 2 Speed 2 Max : 235.918 rpm
    • Voltage State 0 Guaranteed : -3...4.5 V
    • Voltage State 1 Guaranteed : 15...30 V
    • Weee Label : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    • Winding Type : medium speed of rotation and medium torque
    • Relationshiptype : Compatible relationship
  • General Attributes
    • Phase : single phase
    • Product Or Component Type : motion integrated drive
    • Range Of Product : Lexium integrated drive
  • Output Attributes
    • Discrete Output Voltage : 23...25 V
  • Environment Attributes
    • ROHS Exemption Information : Yes
    • China ROHS Url : https://checkaproduct.se.com/DistantRequestDispatcher.aspx?action=exportPdfRoHSChina&pid=792860&lang=en-us
    • Take Back : No
    • Recycled Metal Content At Cr Level : 0%
    • China ROHS Regulation : X
    • Mercury Free : Yes
    • Ambient Air Temperature For Storage : -25-70 °C
    • Circularity Profile : ENVEOLI1411002EN
    • Environmental Disclosure : ENVPEP1411002EN
    • Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
    • Packaging Made With Recycled Cardboard : Yes
    • Packaging Without Single Use Plastic : No
    • Reach Regulation : Reference contains Substances of Very High Concern above the threshold
  • Contractual Warranty Attributes
    • Warranty Period : 18 months
    • Warranty : 18 months
  • Input Attributes
    • Input Output Type : 4 signals (each be used as input or output)
  • Specifications
    • Country of Origin : Germany
    • Length : 6.72 in