This design 18 single mode (polarised reflex system) photo-electric sensor has a PBT case. It has a supply voltage of 12V to 24V DC. This mono-mode cylindrical photoelectric sensor has a plastic body, is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts. It has VALOX® PBT high strength case ideal for high temperature environments and PMMA scratch-resistant lens for maximum sensor durability. 1 LED display allows to identify status of the sensor. IP65, IP67 and IP69K protection makes this product ready for the harshest environments. It can operate in very cold (-25°C) and hot environments (+55°C). It has a standard M12 connector, compatible with all existing market sensor cabling. It provides double insulation for better people and system protection from electrical shocks. It is CSA and UL certified.

• Specifications
• Electrical Connection : 1 male connector M12, 4 pins
• Discrete Output Type : NPN
• Discrete Output Function : 1 NO
• Type Of Output Signal : discrete
• Range Of Product : Telemecanique Photoelectric sensors XU
• Emission : red polarised reflex
• Line Of Sight Type : axial
• Sensor Name : XUB
• Material : plastic
• Wiring Technique : 3-wire
• Series Name : general purpose single mode
• Detection System : polarised reflex
• Sensor Design : cylindrical M18
• Supply Circuit Type : DC
• Electronic Sensor Type : photo-electric sensor
• [Sn] Nominal Sensing Distance : 2-2 m polarised reflex need reflector XUZC50
• Contractual warranty
• Warranty : 18 months
• Complementary
• Current Consumption : 35 mA no-load
• Switching Frequency : <= 500 Hz
• Maximum Delay Response : 1 ms
• Diameter : 18 mm
• Status Led : 1 LED yellow)output state
• Setting-Up : without sensitivity adjustment
• Lens Material : PMMA
• Maximum Voltage Drop : <1.5 V closed state)
• Length : 62 mm
• Net Weight : 0.04 kg
• Maximum Delay Recovery : 1 ms
• Maximum Delay First Up : 15 ms
• Maximum Sensing Distance : 3 m polarised reflex
• Supply Voltage Limits : 10-36 V DC
• Switching Capacity In Ma : <= 100 mA overload and short-circuit protection)
• Wire Insulation Material : PvR
• Enclosure Material : PBT
• Output Type : solid state
• Add On Output : without
• [Us] Rated Supply Voltage : 12...24 V DC reverse polarity protection
• Offer Sustainability
• Rohs Exemption Information : Yes
• Mercury Free : Yes
• Environmental Disclosure : ENVPEP111230EN
• Sustainable Offer Status : Green Premium product
• Reach Regulation : Reference contains Substances of Very High Concern above the threshold
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Circularity Profile : ENVEOLI111208EN
• Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
• Environment
• Product Certifications : CE || UL || CSA
• Vibration Resistance : 7 gn +/- 1.5 mm 10-55 Hz) IEC 60068-2-6
• Ambient Air Temperature For Operation : -25-55 °C
• Shock Resistance : 30 gn 11 ms) IEC 60068-2-27
• Ambient Air Temperature For Storage : -40-70 °C
• Ip Degree Of Protection : IP67 double insulation IEC 60529 || IP65 double insulation IEC 60529 || IP69K double insulation DIN 40050