This design 18 multi mode photo-electric sensor has a PBT case. It has a supply voltage of 12V to 24V DC. This multi-mode cylindrical photoelectric sensor has a plastic body, is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts. It has VALOX® PBT high strength case ideal for high temperature environments and PMMA scratch-resistant lens for maximum sensor durability. 3 LED display allows to identify status of the sensor and troubleshoot issues. IP65, IP67 and IP69K protection makes this product ready for the harshest environments. It can operate in very cold (-25°C) and hot environments (+55°C). It has a standard M12 connector, compatible with all existing market sensor cabling. It provides double insulation for better people and system protection from electrical shocks. It is CSA and UL certified.

• Specifications
• Electrical Connection : 1 male connector M12, 4 pins
• Discrete Output Type : NPN
• Discrete Output Function : 1 NO or 1 NC programmable
• Type Of Output Signal : discrete
• Range Of Product : Telemecanique Photoelectric sensors XU
• Emission : infrared diffuse || infrared diffuse with background suppression || infrared thru beam || red polarised reflex
• Line Of Sight Type : axial
• Sensor Name : XUB
• Material : plastic
• Wiring Technique : 3-wire
• Series Name : general purpose multimode
• Detection System : multimode
• Sensor Design : cylindrical M18
• Supply Circuit Type : DC
• Electronic Sensor Type : photo-electric sensor
• [Sn] Nominal Sensing Distance : 3-3 m polarised reflex need reflector XUZC50 || 20-20 m thru beam need a transmitter XUB0AKSNM12T || 0.12-0.12 m diffuse with background suppression || 0.3-0.3 m diffuse
• Contractual warranty
• Warranty : 18 months
• Complementary
• Current Consumption : 35 mA no-load
• Switching Frequency : <= 250 Hz
• Maximum Delay Response : 2 ms
• Diameter : 18 mm
• Status Led : 1 LED green)supply || 1 LED red)instability || 1 LED yellow)output state
• Setting-Up : self-teaching
• Lens Material : PMMA
• Maximum Voltage Drop : <1.5 V closed state)
• Length : 78 mm
• Net Weight : 0.045 kg
• Maximum Delay Recovery : 2 ms
• Maximum Delay First Up : 200 ms
• Maximum Sensing Distance : 0.12 m diffuse with background suppression || 0.4 m diffuse || 30 m thru beam || 4.5 m polarised reflex
• Supply Voltage Limits : 10-36 V DC
• Switching Capacity In Ma : <= 100 mA overload and short-circuit protection)
• Enclosure Material : PBT
• Output Type : solid state
• Add On Output : without
• [Us] Rated Supply Voltage : 12...24 V DC reverse polarity protection
• Offer Sustainability
• Rohs Exemption Information : Yes
• Mercury Free : Yes
• Environmental Disclosure : ENVPEP111230EN
• Sustainable Offer Status : Green Premium product
• Reach Regulation : Reference contains Substances of Very High Concern above the threshold
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Circularity Profile : ENVEOLI111208EN
• Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
• Environment
• Product Certifications : CSA || CE || UL
• Ambient Air Temperature For Operation : -25-55 °C
• Vibration Resistance : 7 gn +/- 1.5 mm 10-55 Hz) IEC 60068-2-6
• Shock Resistance : 30 gn 11 ms) IEC 60068-2-27
• Ambient Air Temperature For Storage : -40-70 °C
• Ip Degree Of Protection : IP65 double insulation IEC 60529 || IP67 double insulation IEC 60529 || IP69K double insulation DIN 40050