This XS cylindrical (M8 thread) inductive proximity sensor has a PPS sensing face and a stainless steel grade 303 case. It has a supply voltage of 12V to 48V DC. This general purpose threaded cylindrical inductive proximity sensor is flush mountable and has an increased sensing range. It is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts. Non-magnetic 303 stainless steel provides magnetic shielding to the sensor, better accuracy and immunity to magnetic disturbance. It has 4 LED viewports for easy sensor status viewing, setup and troubleshooting. IP65 and IP67 protection makes this product ready for the harshest environments. It can operate in very cold (-25°C) and hot environments (+70°C). It has a standard M12 connector, compatible with all existing market sensor cabling. It is CSA, UL certified.

• Specifications
• Electrical Connection : male connector M12, 4 pins
• [Us] Rated Supply Voltage : 12...48 V DC reverse polarity protection
• Discrete Output Type : NPN
• Discrete Output Function : 1 NO
• Type Of Output Signal : discrete
• Range Of Product : Telemecanique Inductive proximity sensors XS
• Sensor Name : XS6
• Material : stainless steel
• Size : 62 mm
• Wiring Technique : 3-wire
• Ip Degree Of Protection : IP67 conforming to IEC 60529
• Series Name : general purpose
• Body Type : fixed
• [Sn] Nominal Sensing Distance : 2.5 mm
• Sensor Type : inductive proximity sensor
• Detector Flush Mounting Acceptance : flush mountable
• Switching Capacity In Ma : <= 200 mA DC overload and short-circuit protection
• Sensor Design : cylindrical M8
• Output Circuit Type : DC
• Contractual warranty
• Warranty : 18 months
• Complementary
• Current Consumption : <= 10 mA no-load
• Maximum Delay Response : 0.2 ms
• Status Led : output state 1 LED yellow)
• Operating Zone : 0-2 mm
• Maximum Voltage Drop : <2 V closed)
• Threaded Length : 40 mm
• Marking : CE
• Length : 62 mm
• Net Weight : 0.015 kg
• Switching Frequency : <= 2500 Hz
• Thread Type : M8 x 1
• Sensing Range : > 0...0.1 in (> 0...2.5 mm)
• Differential Travel : 1...15% of Sr
• Maximum Delay Recovery : 0.2 ms
• Maximum Delay First Up : 10 ms
• Supply Voltage Limits : 10-58 V DC
• Detection Face : frontal
• Enclosure Material : stainless steel 303
• Front Material : PPS
• Offer Sustainability
• Rohs Exemption Information : Yes
• Mercury Free : Yes
• Environmental Disclosure : ENVPEP111006EN
• Sustainable Offer Status : Green Premium product
• Reach Regulation : Reference contains Substances of Very High Concern above the threshold
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Circularity Profile : ENVEOLI1110045
• Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
• Environment
• Product Certifications : CSA || UL
• Ambient Air Temperature For Operation : -25-70 °C
• Vibration Resistance : 25 gn +/- 2 mm 10-55 Hz)IEC 60068-2-6
• Shock Resistance : 50 gn 11 ms IEC 60068-2-27
• Ambient Air Temperature For Storage : -40-85 °C