This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. It has additional solid-state output for communication with PLCs about safety status of your process.

• Environment
• Product Certifications : CSA || TÜV || UL
• Ambient Air Temperature For Operation : -10-55 °C
• Standards : EN/ISO 13850 || EN/IEC 60947-5-1 || EN 60204-1 || EN 1088/ISO 14119
• Ip Degree Of Protection : IP20 terminals)EN/IEC 60529 || IP40 enclosure)EN/IEC 60529
• Ambient Air Temperature For Storage : -25-85 °C
• Contractual warranty
• Warranty : 18 months
• Offer Sustainability
• Rohs Exemption Information : Yes
• Mercury Free : Yes
• Environmental Disclosure : ENVPEP1406024EN
• Sustainable Offer Status : Green Premium product
• Pvc Free : Yes
• Reach Regulation : Reference contains Substances of Very High Concern above the threshold
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Weee : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• China Rohs Regulation : X
• Circularity Profile : ENVEOLI1406024EN
• Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
• Complementary
• [Uc] Control Circuit Voltage : 115 V
• Mounting Support : 35 mm symmetrical DIN rail
• Output Thermal Current : 6 A per relay relay output
• Minimum Output Voltage : 16 V relay output
• Current Consumption : 60 mA 115 V AC on power supply
• Minimum Output Current : 10 mA relay output
• [Ith] Conventional Free Air Thermal Current : 10.5 A
• Associated Fuse Rating : 4 A gG or gL relay output EN/IEC 60947-5-1, DIN VDE 0660 part 200 || 6 A fast blow relay output EN/IEC 60947-5-1, DIN VDE 0660 part 200
• [Uimp] Rated Impulse Withstand Voltage : 4 kV III IEC 60947-5-1 || 4 kV III DIN VDE 0110 part 1
• Net Weight : 0.21 kg
• [Ui] Rated Insulation Voltage : 300 V 2)IEC 60947-5-1 || 300 V 2)DIN VDE 0110 part 1
• Local Signalling : 2 LEDs
• Breaking Capacity : 1.5 A 24 V DC-13)50 ms relay output
• Maximum Power Consumption In Va : 7 VA AC
• Supply Frequency : 50/60 Hz
• Maximum Response Time On Input Open : 100 ms
• Breaking Capacity : 180 VA holding AC-15 C300 relay output || 1800 VA inrush AC-15 C300 relay output
• Specifications
• [Us] Rated Supply Voltage : 115 V AC - 15...15 %
• Range Of Product : Preventa Safety automation
• Product Or Component Type : Preventa safety module
• Safety Module Name : XPSAC
• Type Of Start : unmonitored
• Output Type : relay instantaneous opening, 3 NO, volt-free
• Connections - Terminals : captive screw clamp terminals, 1 x 0.14...1 x 2.5 mm² flexible with cable end, with double bezel || captive screw clamp terminals, 1 x 0.14...1 x 2.5 mm² solid with cable end, with double bezel || captive screw clamp terminals, 1 x 0.25...1 x 1.5 mm² flexible with cable end, with double bezel || captive screw clamp terminals, 1 x 0.25...1 x 2.5 mm² flexible with cable end, with double bezel || captive screw clamp terminals, 2 x 0.14...2 x 0.75 mm² flexible with cable end, with double bezel || captive screw clamp terminals, 2 x 0.14...2 x 0.75 mm² solid with cable end, with double bezel || captive screw clamp terminals, 2 x 0.25...2 x 1 mm² flexible with cable end, with double bezel || captive screw clamp terminals, 2 x 0.5...2 x 1.5 mm² flexible with cable end, with double bezel
• Number Of Additional Circuits : 1 solid state output
• Safety Module Application : for emergency stop and switch monitoring
• Safety Reliability Data : MTTFd = 210.4 years EN/ISO 13849-1 || DC > 99 % EN/ISO 13849-1 || PFHd = 3.56E-9 1/h EN/IEC 62061
• Function Of Module : switch monitoring || emergency stop
• Safety Level : can reach PL e/category 4 EN/ISO 13849-1 || can reach SILCL 3 EN/IEC 62061