This XPSCM safety module is for monitoring of single-beam photo-electric sensors and has a built-in "muting" function. It meets the requirements of PL c/Category 2 conforming to EN/ISO 13849-1.and SILCL1 conforming to EN/IEC 61508 and EN/IEC 62061. Used in conjunction with XU2S single-beam photo-electric sensors (periodically tested), it establishes a category 2 light curtain conforming to IEC/EN 61496 parts 1 and 2.

• Environment
• Ambient Air Temperature For Operation : -10-55 °C
• Ip Degree Of Protection : IP20 IEC 60529 terminals) || IP40 IEC 60529 enclosure)
• Ambient Air Temperature For Storage : -25-85 °C
• Contractual warranty
• Warranty : 18 months
• Offer Sustainability
• Rohs Exemption Information : Yes
• Mercury Free : Yes
• Environmental Disclosure : ENVPEP1406024EN
• Sustainable Offer Status : Green Premium product
• Pvc Free : Yes
• Reach Regulation : Reference contains Substances of Very High Concern above the threshold
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Weee : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• China Rohs Regulation : X
• Circularity Profile : ENVEOLI1406024EN
• Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
• Complementary
• Muting Maximum Duration : 60 s - 10...30 %)
• Output Thermal Current : 5.6 A per relay || 11 A maximum
• Power Consumption In W : 15 W
• Minimum Output Voltage : 17 V relay output
• Minimum Output Current : 10 mA relay output
• Input Current : 200 mA muting function
• Associated Fuse Rating : 4 A gG relay output DIN VDE 0660 part 200 || 4 A gG relay output EN/IEC 60947-5-1 || 6 A fast blow relay output DIN VDE 0660 part 200 || 6 A fast blow relay output EN/IEC 60947-5-1
• [Uimp] Rated Impulse Withstand Voltage : 4 kV III DIN VDE 0110 parts 1 and 2 || 4 kV III EN/IEC 60947-5-1
• Local Signalling : 1 LED electronic internal fuse status || 1 LED restarting || 1 LED safety outputs closed || 1 LED safety outputs open || 1 incandescent lamp muting 4-6.5 W
• [Ui] Rated Insulation Voltage : 300 V 2)DIN VDE 0110 parts 1 and 2 || 300 V 2)EN/IEC 60947-5-1
• Sensor Power Supply : U+, U- 24-24 V DC
• Maximum Line Resistance : 10 Ohm sensor power supply
• Maximum Supply Current For Sensors : 200 mA
• Protection Type : electronic internal fuse
• Synchronisation Time Between Inputs : 3 s +/- 20 %) for the activation of the MA/MB muting signal
• Breaking Capacity : 20 mA 24 V solid state output || 1.5 A 24 V DC-13)50 ms relay output
• Maximum Response Time On Input Open : 25 ms
• Breaking Capacity : 180 VA holding AC-15 C300 relay output || 1800 VA inrush AC-15 C300 relay output
• Specifications
• [Us] Rated Supply Voltage : 24 V DC - 20...20 %
• Range Of Product : Telemecanique Safety light curtains XUSL
• Product Or Component Type : safety module
• Number Of Inputs : 2 MA, MB)muting function || 4 Z1, Z2, Z3, Z4)sensor
• Safety Module Name : XPSCM
• Output Type : relay 2 NO 13-14, 23-24), volt-free
• Connections - Terminals : captive screw clamp terminals, 1 x 0.14...1 x 2.5 mm² solid or flexible without cable end || captive screw clamp terminals, 1 x 0.25...1 x 1.5 mm² flexible with cable end, with bezel || captive screw clamp terminals, 1 x 0.25...1 x 2.5 mm² flexible with cable end, without bezel || captive screw clamp terminals, 2 x 0.14...2 x 0.75 mm² solid or flexible without cable end || captive screw clamp terminals, 2 x 0.25...2 x 1 mm² flexible with cable end, without bezel || captive screw clamp terminals, 2 x 0.5...2 x 1.5 mm² flexible with cable end, with double bezel
• Input Compatibility : XC limit switch muting function || XU2M18PP340... muting function || XU2S18PP340... (infrared) sensor || XU9M18PP340... muting function
• Number Of Additional Circuits : 0
• Input Voltage : 24 V DCsensor || 24 V DC U+, U-)muting function
• Safety Module Application : for monitoring of single beam photo-electric sensor
• Safety Reliability Data : MTTFd = 16.6 years EN/ISO 13849-1 || DC = 95.5 % EN/ISO 13849-1 || PFH = 3.12E-7 1/h EN/IEC 61508 || PFHd = 3.12E-7 1/h EN/IEC 62061
• Function Of Module : built-in muting
• Safety Level : can reach category 2 with the appropriate control system and correctly wired EN/ISO 13849-1 || can reach SILCL 1 with the appropriate control system and correctly wired EN/IEC 62061 || can reach PL = c with the appropriate control system and correctly wired EN/ISO 13849-1