This 3-phase control relay belongs to the Schneider Electric Harmony Control relays range. This 3-phase control relay is integrated with NFC technology which brings in digital operation instead of analog operation. This is a 8A multifunction 3-phase control relay which monitors 3-phase or 3-phase with Neutral network and has an adjustable time delay of 0.1s to 60min. With Harmony NFC App, different alarms can be combined using AND, OR and NOT logic to form unique monitoring combinations for the two relay outputs which are individually configurable. NFC 3-phase control relay is a single reference supporting 7 functions namely Phase loss, Phase sequence, Asymmetry, Undervoltage, Overvoltage, Under-frequency, and Over-frequency. The 3-phase control relay is IP20 (terminals), IP40 (housing), and IP40(front panel) protected. Furthermore, the 4 digit password enhances security by preventing unauthorized change of settings. This RMNF22 dimensions are 22.5mm (width) x 90mm (height) x 99mm (depth) and weighs 0.125Kg. 0 0 It conforms to international standard EN/IEC 60255-1 and certifications like UL, CSA, CE, CCC, EAC, and RCM. 0 It is sold as a single unit. 0 Monitoring and testing are now intuitive as exact fault conditions can be identified through front LEDs and analyze data with Harmony NFC App. This saves time and boosts efficiency. 0 0 0 0 0

• Prop 65
• WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

• Communications & Management Attributes
• Alarm Threshold : 166...576 V adjustable overvoltage and undervoltage detection (line to line);96...332 V adjustable overvoltage and undervoltage detection (line to neutral);5...150 V adjustable asymmetry;45...66 Hz adjustable overfrequency or underfrequency;
• Complementary Attributes
• Line Rated Current : 8 A
• Maximum Measuring Cycle : 150 ms measurement cycle as true rms value
• Maximum Operating Frequency : 13.56 MHz
• Maximum Switching Current : 8 A AC
• Maximum Switching Voltage : 250 V AC
• Minimum Switching Current : 10 mA 12 V DC
• Important Information Attributes
• Persona Type Ids : BM9, EU, LC, OM, OM8, PB, SC, SI, VR
• Persona Type Names : Charge Point Operator, End User, Contractor, Original Equipment Manufacturer, OEM - Control Panelbuilder, Panel Builder, Electrician, System Integrator, IT Channel Partner
• Market Segmentation Id : COMMERCIAL, INDUSTRIAL
• Market Segmentation : Commercial, Industrial
• Electromagnetic Compatibility : immunity for industrial environments conforming to IEC 61000-6-2, surge immunity test - test level: 2 kV level 4 (differential mode) conforming to IEC 61000-4-5immunity for residential, commercial and light-industrial environments conforming to IEC 61000-6-1emission standard for industrial environments conforming to IEC 61000-6-4surge immunity test - test level: 4 kV level 4 (common mode) conforming to IEC 61000-4-5
• Insulation Resistance : > 100 MOhm 500 V DC IEC 60255-27, > 100 MOhm 500 V DC IEC 60255-27, > 100 MOhm 500 V DC IEC 60255-27, > 100 MOhm 500 V DC IEC 60255-27> 100 MOhm 500 V DC IEC 60255-27, > 100 MOhm 500 V DC IEC 60255-27, > 100 MOhm 500 V DC IEC 60255-27, > 100 MOhm 500 V DC IEC 60255-27
• Local Signalling : R2, amber LED blinking)timing in progress, Un, green LED steady)power ON, R1, amber LED steady)relay energisedR1, amber LED blinking)timing in progress, R2, amber LED steady)relay energised, PL, red LED steady)alarm phase failure triggeredPS, red LED blinking)alarm phase sequence failure triggeredUV, red LED steady)alarm undervoltage failure triggeredOV, red LED blinking)alarm overvoltage failure triggeredUF, red LED steady)alarm underfrequency failure triggeredOF, red LED blinking)alarm overfrequency failure triggeredASYM, red LED steady)alarm asymmentry failure triggered
• Marking : WEEE, China, ROHS
• Measurement Error : +/- 0.05 %/°C with temperature variation, +/- 0.05 %/°C with temperature variation, +/- 0.05 %/Hz with frequency variation, +/- 0.05 %/Hz with frequency variation+/- 0.05 %/°C with temperature variation, +/- 0.05 %/°C with temperature variation, +/- 0.05 %/Hz with frequency variation, +/- 0.05 %/Hz with frequency variation
• Overvoltage Category : III conforming to IEC 60664-1, III conforming to UL 508
• Relay Monitored Parameters : asymmetry, phase sequence, phase failure detection, overvoltage detection, undervoltage detection, overfrequency and underfrequency, asymmetry
• Repeat Accuracy : +/- 0.5 % input and measurement circuit, +/- 0.5 % input and measurement circuit, +/- 3 % time delay, +/- 3 % time delay+/- 0.5 % input and measurement circuit, +/- 0.5 % input and measurement circuit, +/- 3 % time delay, +/- 3 % time delay
• Response Time : <= 300 ms (in the event of a fault), <= 300 ms (in the event of a fault)<= 300 ms (in the event of a fault), <= 300 ms (in the event of a fault)
• Setting Accuracy Of Time Delay : +/- 3 % 10 s...60 min, +/- 3 % 10 s...60 min, +/- 300 ms 0...10 s, +/- 300 ms 0...10 s+/- 3 % 10 s...60 min, +/- 3 % 10 s...60 min, +/- 300 ms 0...10 s, +/- 300 ms 0...10 s
• Tightening Torque : 0.6-1 N.m IEC 60947-1, 5.3-8.9 lbf.in
• Utilisation Category : AC-15 250-250 V AC 3-3 A conforming to IEC 60947-5-1DC-13 24-24 V DC 2-2 A conforming to IEC 60947-5-1, AC-1 250-250 V AC 8-8 A conforming to IEC 60947-4-1DC-1 24-24 V DC 5-5 A conforming to IEC 60947-4-1
• Certificate Agency : CE, UL, CSA, CCC, EAC, RCM, UKCA
• [Uc] Control Circuit Voltage : 208...480 V, 120...277 V
• [Us] Rated Supply Voltage : 208...480 V AC 50/60 Hz, non self-powered, 120...277 V AC 50/60 Hz, non self-powered
• Connections - Terminals : screw terminals, 2 x 0.5...2 x 2.5 mm² 20 AWG...14 AWG) solid without cable endscrew terminals, 2 x 0.2...2 x 1.5 mm² 24 AWG...16 AWG) flexible with cable endscrew terminals, 1 x 0.5...1 x 4 mm² 20 AWG...12 AWG) solid without cable endscrew terminals, 1 x 0.2...1 x 2.5 mm² 24 AWG...14 AWG) flexible with cable end, screw connectors
• Carbon Footprint Of The Distribution Phase [A4] : 0.0175464727, 0 kg CO2 eq.
• Carbon Footprint Of The End-of-life Phase [C1 To C4] : 0.0790258909, 0.1 kg CO2 eq.
• Carbon Footprint Of The Installation Phase [A5] : 0 kg CO2 eq., 0.0006785287
• Carbon Footprint Of The Manufacturing Phase [A1 To A3] : 3 kg CO2 eq., 2.7954181818
• Carbon Footprint Of The Use Phase [B2 B3 B4 B6] : 55 kg CO2 eq., 54.9367466667
• Local Data Status : Publishable
• Local Publishable Date : 2026-03-26
• Return Indicator : Y
• Stocking Flag : N
• Stock Policy : 2
• Service Catalog Item : Finished good
• Weee Scope : In
• Weee Product Category : 5
• Scope Perimeter : At least in Europe
• Eoli Availability Display : Yes
• End Of Life Doc Ref : ENVEOLI2506028EN
• Reach Full Compliance Status : Reference contains Substances of Very High Concern above the threshold
• Reach Full Compliance Status Id : CONTAINS_SVHC
• Reach Compliance Directive : Reference contains Substances of Very High Concern above the threshold
• Rohs Eur In Scope : No
• Rohs Eur Status : Compliant By Exemption
• Rohs Eur Conformity Date : 1930
• Rohs Eur Full Compliance Status : Compliant By Exemption
• China Rohs In Scope : Yes
• China Rohs Label : 5
• With Recycled Cardboard : Yes
• Without Single Use Plastic : Yes
• Product Contributes To Saved And Avoided Emissions : No
• Tier Id : 1
• Tier : 1
• Function Option Id : STANDARD
• Function Option : Standard
• Product Kit Identifier : N
• Adjustment Of Asymmetry Threshold : 2...20 % of Un selected
• Control Type : without Diagnostic button
• Dielectric Test Voltage : 2.5 kV AC 50 Hz, 1 min IEC 60255-27
• Electrical Durability : 100000 cycles
• Housing Material : polycarbonate
• Hysteresis : 3-3 % fixed at nominal voltage phase failure detection
• Immunity To Microbreaks : 10 ms less than or equal
• Measurement Range : 208...480 V AC
• Mechanical Durability : 10000000 cycles
• Mounting Support : 35 mm symmetrical DIN rail conforming to IEC 60715
• Nominal Power : 0.0002 mW
• Operating Position : any position without derating
• Operating System : Androidversion >= V7.0iOSversion >= V14.5
• Power Consumption In Va : 4-4 VA 480 V AC 60 Hz
• Product Availability : Stock - Normally stocked in distribution facility
• Range Of Product : Harmony Control Relays
• Relay Name : RMNF22
• Relay Type : NFC control relay
• Reset Time : 1500 ms at maximum rated voltage
• Returnability : Yes
• Safety Reliability Data : MTTF = 128.5 years
• Setting Accuracy Of The Switching Threshold : +/- (1.5 % + 1 V)+/- (1.5 % + 1 V)
• Shock Resistance : 15 gn 11 ms) not in operation IEC 60068-2-275 gn 11 ms) in operation IEC 60068-2-27
• Software Designation : Ecostruxure Industrial Device downloadable from Google Play store or Apple Store)
• Software Version : EIME v5.8.1
• Supply Frequency : 50...60 Hz +/- 10 %
• Supply Voltage Limits : 166.4-576 V AC line to line96-332.4 V AC line to neutral
• Sustainable Packaging : Yes
• Switching Capacity In Va : 2000 VA
• Threshold Adjustment Voltage : 2...20 % of Un selected
• Time Delay Type : adjustable 0.1 s...60 min Tt- time delay upon fault
• Total Lifecycle Carbon Footprint : 58 kg CO2 eq.
• Vibration Resistance : 0.075 mm 10-58.1 Hz) not in operation IEC 60068-2-61 gn 58.1-150 Hz) not in operation IEC 60068-2-60.035 mm 10-60.1 Hz) in operation IEC 60068-2-60.5 gn 60.1-150 Hz) in operation IEC 60068-2-6
• Weee Label : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• Measurement Range 4 : 208...480 V AC
• Pep Code : ENVPEP2506028EN
• Database Version : 2016-11
• Pep Verification Date : 2019-05-01
• Pcr Version : PCR-ed3-EN-2015 04 02
• Psr Version : PSR-0005-ed2-EN-2016 03 29
• Type Of Verification For The Pep : Independent internal review
• Data Source : extrapolated product
• Functional-unit Description : To switch ON/OFF electrical contacts when the abnormal operating conditions is detected during 10 years and a 100% use rate.
• Functional-unit Quantity : 1
• Functional-unit Unit : unité (unit)
• Reference Lifetime In Y : 10
• Energy Consumption On Product Lifetime In Kwh : 112.128
• Energy Model - Manufacturing [A1-a3] : Energy model used: Indonesia
• Energy Model - Installation [A5] : Electricity mix; AC; <lt/> 1kV; EU-27
• Energy Model - Use [B6] : Electricity mix; AC; <lt/> 1kV; EU-27
• Energy Model - End Of Life [C1-c4] : Electricity mix; AC; <lt/> 1kV; EU-27
• Height Nominal : 90 mm
• Height Useful : 90 mm
• Width Nominal : 22.5 mm
• Width Real : 22.5 mm
• [Ui] Rated Insulation Voltage : 400 V IEC 60664-1
• [Uimp] Rated Impulse Withstand Voltage : 4 kV IEC 60664-1
• Run-up Delay At Power-up : 650 ms
• Nbr. Of Units In Pkg. : 1
• Package Weight(Lbs) : 138.000 g
• Take-back : No
• Warranty (In Months) : 18
• Net Use Of Fresh Water (M3) Operational Energy Use [B6] : 199.1936
• Non-hazardous Waste Disposed Of (Kg) Operational Energy Use [B6] : 204.8256
• Total Use Of Non-renewable Primary Energy Resources (Primary Energy And Primary Energy Resources Used As Raw Materials) (Mj) Operational Energy Use [B6] : 957.696
• Total Use Of Primary Energy During The Life Cycle (Mj) Operational Energy Use [B6] : 1097.216
• Total Use Of Renewable Primary Energy Resources (Primary Energy And Primary Energy Resources Used As Raw Materials) (Mj) Operational Energy Use [B6] : 139.52
• Use Of Non-renewable Primary Energy Excluding Non-renewable Primary Energy Resources Used As Raw Materials (Mj) Operational Energy Use [B6] : 957.696
• Use Of Renewable Primary Energy Excluding Renewable Primary Energy Resources Used As Raw Materials (Mj) Operational Energy Use [B6] : 139.52
• Water Pollution (M3) Operational Energy Use [B6] : 2266.88
• Customs Code : 8536490080
• Environment Attributes Main
• Ambient Air Temperature For Operation : -30-60 °C, -22-140 °F-30-60 °C, -22-140 °F
• Ambient Air Temperature For Storage : -40-70 °C, -40-158 °F, -40-70 °C, -40-158 °F
• Directives : 2014/30/EU - electromagnetic compatibility, 2014/35/EU - low voltage directive, 2014/53/EU - radio equipment directive
• Ip Degree Of Protection : IP20 IEC 60529 terminals)IP40 IEC 60529 housing), IP40 IEC 60529 front panel)
• Relative Humidity : 93-97 % 25-55 °C IEC 60068-2-30, 77-131 °F
• Take Back : No
• Recycled Metal Content At Cr Level : 0 %
• China Rohs Regulation : X
• Mercury Free : Yes
• Carbon Footprint : 57.8294157408
• Circularity Profile : ENVEOLI2506028EN
• Environmental Disclosure : ENVPEP2506028EN
• Eu Rohs Directive : Compliant By Exemption
• Packaging Made With Recycled Cardboard : Yes
• Packaging Without Single Use Plastic : Yes
• Product Compatibility : NFC enabled mobile device
• Reach Regulation : Reference contains Substances of Very High Concern above the threshold
• Pep Code : ENVPEP2506028EN
• Pep Verification Date : 2019-05-01
• Pcr Version : PCR-ed3-EN-2015 04 02
• Psr Version : PSR-0005-ed2-EN-2016 03 29
• Type Of Verification For The Pep : Independent internal review
• General Attributes
• Range Of Product : Harmony Control Relays
• ETIM
• ETIM 8 : EC001441
• ETIM 9 : EC001441
• Output Attributes
• Nominal Output Current : 8 A
• Output Contacts : 2 C/O
• Specifications
• Height : 3.54 in
• Width : 0.89 in
• Country of Origin : Brazil, France, Indonesia, United States