Power quality meter, PowerLogic PM8000, Advanced, transducer, 512MB, 512s/c

Name: Power quality meter, PowerLogic PM8000, Advanced, transducer, 512MB, 512s/c
Brand: Mayer Electric Supply
SKU: SQDMETSEPM8343
Price: 22637.48 USD
Availability: OutOfStock

Power quality meter, PowerLogi

SQDMETSEPM8343 METSEPM8343 3606486874769

22637.48 / EA

http://schema.org/OutOfStock

Mayer-DDS-Power quality meter, PowerLogic PM8000, Advanced, transducer, 512MB, 512s/c-1

Country of Origin: Canada
Depth: 90.8 mm
Number of Outputs: 1 Pulse

QTY

Specifications

Communications & Management Attributes

Communication Port Protocol : Modbus RTU 115 kbauds - 2-wire, ION 115 kbauds - 2-wire, DNP3, IEC 61850, Modbus TCP/IPEthernet Modbus TCP/IP daisy chain 10/100 Mbit/s, RSTP 801.1d 2004
Communication Service : SMTP e-mail notification, DHCP, RSTP support, NTP time synchronization, PTP time synchronization
Communication Network Type : IPv6 (internet protocol)
Communication Port Support : ETHERNETscrew terminal block RS485

Complementary Attributes

Line Rated Current : 1 A, 10 A, 5 A

Important Information Attributes

Cybersecurity : password protection, port hardening, enable/disable communication ports, robust security logs, Syslog protocol support
Data Recording : harmonics logs, sag and swell logs, GPS synchronisation, time stamping, data logs, trending/forecasting, waveform logs, alarm logs, sequence of event recording, min/max of instantaneous values, event logs, 64 data recorders
Device Application : WAGES metering, power monitoring
Electromagnetic Compatibility : electrostatic discharge conforming to IEC 61000-4-2radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3electrical fast transient/burst immunity test conforming to IEC 61000-4-4surge immunity test conforming to IEC 61000-4-5conducted RF disturbances conforming to IEC 61000-4-6magnetic field at power frequency conforming to IEC 61000-4-8voltage dips and interruptions immunity test conforming to IEC 61000-4-11immunity to impulse waves conforming to IEC 61000-4-12conducted and radiated emissions conforming to EN 55022, conducted and radiated emissions conforming to EN 55011, conducted and radiated emissions conforming to FCC part 15, conducted and radiated emissions conforming to ICES-003conducted RF disturbances (2...150 Hz) conforming to CLC/TR 50579surge withstand (2...150 Hz) conforming to IEEE C37.90.1
Information Displayed : voltage, current, frequency, power, energy consumption, harmonic distortion
Isolation Voltage : III400-690 V conforming to IEC 61010-1:ed. 3, III400-690 V conforming to EN 61010-1:ed. 3III347-600 V conforming to UL 61010-1:ed. 3, III347-600 V conforming to CSA C22.2 No 61010-1:ed. 3
Market Segment : buildings large building network management: main incomerbuildings large building network management: sub feederbuildings multi-site network management: sub feederdata center large building network management: sub feeder, healthcare network management: sub feederindustry network management: sub feeder, buildings large building cost management: billing: sub feeder, buildings small building network management: main incomer, buildings medium building network management: main incomer, buildings multi-site network management: main incomer, data center medium building network management: main incomer, healthcare multi-site network management: main incomer, industry network management: main incomer, utility network management: sub feeder
Measurement Accuracy : current +/- 0.1 %, voltage +/- 0.1 %active energy +/- 0.2 %
Network Frequency : 50 Hz, 60 Hz
Number Of Poles : 1P + N, + N, 3P
Power Quality Analysis : EN 50160 2010 compliance reportIEEE 519 2014 compliance report, IEC 61000-4-30 class A power quality measurementIEC 61000-4-15 up to the 63rd harmonic, harmonic distortion, waveform capture, voltage sag and swell detection, IEEE 519 2014 programmablity (logic and math functions)IEC 62586 power quality monitoring, disturbance direction detection, IEC 61000-4-15 flicker, rapid voltage change
Type Of Measurement : active and reactive power per phase, rmsapparent power per phase, rmspower factor per phase, rms, current per phase, rms, voltagefrequency total, active and reactive power total, apparent power total, power factor total
Web Services : customizable home page, file upload/download via FTP, file upload/download via SFTP, web server, alarm notification by e-mail, viewing of captured waveform (FTP), viewing of captured waveform (web), HTTPS server
Certificate Agency : CE, cULus, N998
Carbon Footprint Of The Distribution Phase [A4] : 0.5737616077149312, 0.6 kg CO2 eq.
Carbon Footprint Of The End-of-life Phase [C1 To C4] : 2 kg CO2 eq., 1.530093881154107
Carbon Footprint Of The Installation Phase [A5] : 0.45060626220352684, 0.5 kg CO2 eq.
Carbon Footprint Of The Manufacturing Phase [A1 To A3] : 32 kg CO2 eq., 32.04606541588121
Carbon Footprint Of The Use Phase [B2 B3 B4 B6] : 203 kg CO2 eq., 202.64310837690203
Local Data Status : Publishable
Local Publishable Date : 2025-12-02
Return Indicator : Y
Stocking Flag : Y
Device Type : Relay, Control & Measurement - measuring, monitoring device
Serviceability : No
Weee Scope : In
Weee Product Category : 5
Scope Perimeter : At least in Europe
Eoli Availability Display : Yes
End Of Life Doc Ref : ENVEOLI1406022EN
Reach Full Compliance Status : Reference contains Substances of Very High Concern above the threshold
Reach Full Compliance Status Id : CONTAINS_SVHC
Reach Compliance Directive : Reference contains Substances of Very High Concern above the threshold
Rohs Eur In Scope : Yes
Rohs Eur Status : Compliant By Exemption
Rohs Eur Conformity Date : 2345
Rohs Eur Full Compliance Status : Compliant By Exemption
China Rohs In Scope : Yes
China Rohs Label : 7
With Recycled Cardboard : No
Without Single Use Plastic : No
Product Contributes To Saved And Avoided Emissions : No
Dangerous Goods Code : LITHIUM METAL BATTERIES IN EQUIP. BUTTON CELL-BAT EXEMPT
Product Kit Identifier : N
Compatibility Code : PM8243
Device Short Name : PM8343
Display Type : Without Display
Energy Efficiency Optimized : False
Frequency Measurement Range : 42-69 Hz
Installation Category : III
Measurement Current : 50-10000 mA
Measurement Voltage : 57-400 V AC 42...69 Hz between phase and neutral100-690 V AC 42...69 Hz between phases
Memory Capacity : 512 MB
Mounting Mode : clip-on
Mounting Support : DIN rail
Power Consumption In Va : 16 VA 230 V AC
Product Availability : Non-Stock - Not normally stocked in distribution facility
Product Name : PowerLogic PM8000
Product Or Component Type : power meter
Range : PowerLogic
Returnability : Yes
Sampling Rate : 512 samples/cycle
Software Version : v6.3.2-2
Sustainable Packaging : No
Total Lifecycle Carbon Footprint : 237 kg CO2 eq.
Weee Label : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Pep Code : ENVPEP1406022_V2
Database Version : 2025-04
Pep Verification Date : 2025-11-28
Pcr Version : PEP-PCR-ed4-2021 09 06
Psr Version : PSR-0005-ed3.1-EN-2023 12 08
Type Of Verification For The Pep : Independent external review
Data Source : extrapolated product
Functional-unit Description : The functional unit of the PowerLogic PM8000 series is a high-precision power and energy meter designed for advanced monitoring and analysis. It operates with a low power consumption of 4.7 W in active mode and supports 100% runtime, with a total energy consumption of 411.72 kWh for active components for 10 years. It features robust cybersecurity with secure protocols (HTTPS, SFTP), Syslog support, and 50 configurable user accounts. With 512 MB memory, it supports 50 data logs, waveform captures, alarms, energy trends, and custom web pages. It offers precise event timestamping to ±1 ms using PTP, NTP, IRIG-B, GPS, and network time sync. The device includes 3 digital inputs, 1 digital output, and supports up to 4 I/O modules (relays, analog/digital I/Os). It operates in harsh environments (-25 to +70°C, 5–95% humidity, up to 3000 m altitude) and mounts via DIN rail with optional remote display.
Functional-unit Quantity : 1
Functional-unit Unit : unit
Reference Lifetime In Y : 10
Energy Consumption On Product Lifetime In Kwh : 411.72
Energy Model - Manufacturing [A1-a3] : Electricity Mix; Low voltage; 2020; Canada, CA
Energy Model - Installation [A5] : No energy used
Energy Model - Use [B6] : Electricity Mix; Low voltage; 2020; United States, US
Energy Model - End Of Life [C1-c4] : Global, European and French datasets are used.
Recyclability Potential In % : 12
Height Nominal : 90.5 mm
Width Nominal : 90.5 mm
[Us] Rated Supply Voltage : 90...415 V AC 45...65 Hz +/- 10 %110...415 V DC +/- 10 %
Nbr. Of Units In Pkg. : 1
Package Weight(Lbs) : 854.000 g
Take-back : No
Warranty (In Months) : 18
Use Of Renewable Primary Energy Resources Used As Raw Materials (Mj) Benefits/Loads Beyond System Boundaries [D] : 2.6586
Customs Code : 9028300000
Other Technical Guide Name : PLSED310058EN

Environment Attributes Main

Ambient Air Temperature For Storage : -40-85 °C, -40-85 °C
Take Back : No
Recycled Metal Content At Cr Level : 0 %
China Rohs Regulation : X
Carbon Footprint : 237.2436355438558
Ambient Air Temperature For Operation : -25-70 °C-25-70 °C
Circularity Profile : ENVEOLI1406022EN
Environmental Disclosure : ENVPEP1406022_V2
Eu Rohs Directive : Compliant By Exemption
Ip Degree Of Protection : IP30 conforming to IEC 60529
Operating Altitude : 9842.52 ft (3000 m)
Packaging Made With Recycled Cardboard : No
Packaging Without Single Use Plastic : No
Reach Regulation : Reference contains Substances of Very High Concern above the threshold
Relative Humidity : 5-95 %
Pep Code : ENVPEP1406022_V2
Pep Verification Date : 2025-11-28
Pcr Version : PEP-PCR-ed4-2021 09 06
Psr Version : PSR-0005-ed3.1-EN-2023 12 08
Type Of Verification For The Pep : Independent external review

General Attributes

Product Or Component Type : power meter

ETIM

ETIM 8 : EC002301
ETIM 9 : EC002301

Output Attributes

Number Of Outputs : 1 pulse

Input Attributes

Analogue Input Type : voltage (impedance 5 MOhm)current (impedance 0.3 mOhm)
Number Of Inputs : 3 digital 30 V AC3 digital 60 V DC

Specifications

Country of Origin : Canada
Depth : 90.8 mm

Power quality meter, PowerLogic PM8000, Advanced, transducer, 512MB, 512s/c

Power quality meter, PowerLogi

characters left.