This product is part of the Lexium SD3 range, an offer of 3phase stepper drives and stepper motors. This is a stepper motor drives with pulse/direction interface. It is equipped with an oscillator mode. Its supply voltage varies from 24VDC to 48VDC. The drive is for 3 phase stepper motors equipped with control electronics with a pulse/direction interface. Its supply voltage limits are 19V to 60 V. Its maximum motor phase current is 10A. It measures 117mm wide, 74.5mm deep, and 23.5 mm high. It weighs 0.25kg. It is designed to drive motion in such applications as folding or finishing machines, small numerical control machines, sewing machines, embroidery machines. This product is certified by CE, CUL, and UL. It meets EN/IEC 50178, EN/IEC 61800-5-1, EN/IEC 61800-3 environment 1/2, and EN/IEC 61800-3 standards. It is compatible with BRS364H, BRS366H, BRS368H, BRS397H, BRS39AH, and BRS39BH stepper motors. It can be mounted directly via the narrow or wide mounting surface with two M4 screws, and optionally be snapped onto a standard TH35 rail. The SD3 is an universally applicable stepper motor drive. Stepper drives and stepper motors are for motion control with high accuracy and high torque at low rotation speeds.

• Prop 65
• WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

• Environment
• Product Certifications : UL || cUL
• Standards : IEC 61800-3 environment 1 || IEC 61800-3 || IEC 50178 || IEC 61800-5-1 || EN/IEC 61800-3 environment 2
• Pollution Degree : level 2
• Electromagnetic Compatibility : electrostatic discharge level 3 conforming to IEC 61000-4-2 || immunity to electrical transients level 4 conforming to IEC 61000-4-4 || immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 || voltage/current impulse level 3 conforming to IEC 61000-4-5
• Marking : CE
• Ambient Air Temperature For Operation : 0-50 °C
• Vibration Resistance : 1 gn (f= 13-150 Hz) conforming to IEC 60068-2-6 || 1.5 mm (f= 3-13 Hz) conforming to IEC 60068-2-6
• Ambient Air Temperature For Storage : -25-70 °C
• Relative Humidity : 5-85 % without condensation
• Ip Degree Of Protection : IP20
• Operating Altitude : <= 3280.84 ft (1000 m) without derating || > 3280.84...< 6561.68 ft (> 1000...< 2000 m) without derating maximum ambient temperature 40°C, lateral distance of > 20 mm)
• Contractual warranty
• Warranty : 18 months
• Environmental data
• Rohs Exemption Information : Yes
• Packaging Made With Recycled Cardboard : Yes
• Mercury Free : Yes
• Environmental Disclosure : ENVPEP111115EN
• Packaging Without Single Use Plastic : No
• Scip Number : 19ee4950-c76c-48d9-8353-203688a9f056
• Reach Regulation : Reference contains Substances of Very High Concern above the threshold
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Minimum Percentage Of Recycled Plastic Content : 0
• Circularity Profile : ENVEOLI111103EN
• Take-Back : No
• Pvc Free : Yes
• Global Warming ; Total Life Cycle​ : 205 kg CO2 eq.
• Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
• Carbon Footprint (Kg Co2 Eq, Total Life Cycle) : 205.1677761962
• Complementary
• [Us] Rated Supply Voltage : 24...48 V - 15...10 %
• Height : 117 mm
• Maximum Switching Current : 200 mA readiness signal output) || 50 mA pulse/direction output signal) || 20 mA output signal)
• Physical Interface : RS422 - pulse/direction interface with oscillator
• Maximum Motor Phase Current : 10 A
• Maximum Voltage Drop : <1 V 50 mA load readiness signal output || <0.5 V pulse/direction output signal
• Format Of The Drive : block
• Shock Resistance : 15 gn 11 ms IEC 60068-2-27
• Supply Voltage Type : DC
• Input Current : 25 mA 5 V optocoupler input signals || 7 mA 24 V optocoupler input signals
• Current Consumption : <= 7.5 mA
• Residual Ripple : < 5 % 24 V control voltage)
• Phase : single phase
• Net Weight : 0.25 kg
• Maximum Leakage Current : 30 mA
• Voltage State 0 Guaranteed : <= 5 V 24 V optocoupler input signals || <= 0.4 V 5 V optocoupler input signals
• Maximum Switching Voltage : 30 V DC readiness signal output) || 30 V pulse/direction output signal) || 10 V DC output signal)
• Communication Interface : pulse/direction, Integrated
• Local Signalling : 1 LED - ERR || 1 LED - RUN
• Voltage State 1 Guaranteed : 15...30 V 24 V optocoupler input signals || 2.5...5.25 V 5 V optocoupler input signals
• Associated Fuse Rating : 10 A
• Maximum Input Frequency : 200 kHz 24 V optocoupler input signals || 200 kHz 5 V optocoupler input signals
• Type Of Cooling : natural convection
• Resistance : 10 kOhm external potentiometer)
• Analogue Input Type : voltage 0...10 V 10 bits 50 kOhm
• Width : 74.5 mm
• Overvoltage Category : III
• Depth : 23.5 mm
• Power Losses : <= 7 W
• Input Voltage : < 30 V
• Specifications
• Country of Origin : Germany
• Width : 74.5 mm
• Height : 117 mm
• Weight : 0.25 kg
• Range Of Product : Lexium SD3
• Product Or Component Type : motion stepper drive
• Supply Voltage Limits : 19-60 V
• Device Short Name : SD315