This Altivar 340 variable speed drive can feed 3-phase synchronous and asynchronous motors in open and closed loop control. Altivar Machine ATV340 drives are sized heavy duty as standard. It works at a rated power up to 1.5kW / 2hp and a rated voltage from 380V to 480V AC. ATV340 has been designed to meet the needs of applications for harsh environments, such as vibration, shock and non-conductive dust and where high temperature resistance up to 60 °C is needed. This product integrates Modbus serial line communication protocols as standard. This drive features multi-protocol Ethernet embedded, it consists of Ethernet IP and Modbus TCP communication interfaces. it weighs 1.7kg and its dimensions are, 85mm wide, 270mm high, 232.5mm deep. ATV340 incorporates functions and features suitable for the most common applications, including packaging, material handling, material working, hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions), IEC 60721-3, IEC 61508, IEC 13849-1. It is also CE, UL, CSA, and TÜV certified. Accessories and options (encoder interface modules, I/O expansion modules, communication modules, braking resistors, line chokes, additional EMC filters) are available with Altivar Machine ATV340 drives, depending on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV340 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).

• Prop 65
• WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

• Complementary
• Prospective Line Isc : 5 kA
• Power Dissipation In W : natural convection 46 W 380 V 4 kHz heavy duty) || forced convection 46 W 380 V 4 kHz heavy duty) || natural convection 59 W 380 V 4 kHz normal duty) || forced convection 59 W 380 V 4 kHz normal duty)
• Line Current : 6 A 380 V without line choke heavy duty) || 4.9 A 480 V without line choke heavy duty) || 5.1 A 380 V with external line choke normal duty) || 4.1 A 480 V with external line choke normal duty) || 3.5 A 380 V with external line choke heavy duty) || 2.8 A 480 V with external line choke heavy duty)
• Analogue Output Type : software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1 0...20 mA 500 Ohm 10 bits
• Discrete Output Type : programmable output DQ1, DQ2 30 V DC 100 mA
• Asynchronous Motor Control Profile : constant torque standard || optimized torque mode || variable torque standard
• Maximum Switching Current : relay output R1C resistive, cos phi = 1 3 A 250 V AC || relay output R1C resistive, cos phi = 1 3 A 30 V DC || relay output R1C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1C inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R2C resistive, cos phi = 1 5 A 250 V AC || relay output R2C resistive, cos phi = 1 5 A 30 V DC || relay output R2C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R2C inductive, cos phi = 0.4 7 ms 2 A 30 V DC
• 4 Quadrant Operation Possible : true
• Apparent Power : 3.8 kVA 480 V normal duty) || 4.1 kVA 480 V heavy duty)
• Net Weight : 1.7 kg
• With Safety Function Safe Direction (Sdi) : false
• Type Of Polarization : no impedance
• Relay Output Type : relay outputs R1A || relay outputs R1C 100000 cycles || relay outputs R2A || relay outputs R2C 100000 cycles
• Switching Frequency : 2...16 kHz adjustable || 8...16 kHz with derating factor
• Maximum Transient Current : 6.2 A 60 s normal duty) || 6 A 60 s heavy duty) || 7.6 A 2 s normal duty) || 7.2 A 2 s heavy duty)
• Analogue Input Number : 2
• Motor Slip Compensation : adjustable || not available in permanent magnet motor law || can be suppressed || automatic whatever the load
• Discrete Output Number : 2.0
• With Safety Function Safe Position (Sp) : false
• Method Of Access : slave Modbus RTU || slave Modbus TCP
• With Safety Function Safely Limited Position (Slp) : false
• With Safety Function Safe Operating Stop (Sos) : false
• Number Of Addresses : 1-247
• Discrete Input Number : 5
• With Sft Fct Safe Stop 2 (Ss2) : false
• With Safety Function Safe Stop 1 (Ss1) : true
• Width : 85.0 mm
• Transmission Rate : 4.8 kbit/s || 9.6 kbit/s || 19.2 kbit/s || 38.4 kbit/s
• Depth : 232.5 mm
• Analogue Input Type : AI1 software-configurable current 0...20 mA 250 Ohm 12 bits || AI1 software-configurable temperature probe or water level sensor || AI1 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bits || AI2 software-configurable voltage - 10...10 V DC 31.5 kOhm 12 bits
• Electrical Connection : line side screw terminal 1.5...4 mm² AWG 14...AWG 12 || DC bus screw terminal 4...6 mm² AWG 12...AWG 10 || motor screw terminal 1.5...4 mm² AWG 14...AWG 12 || control screw terminal 0.2...2.5 mm² AWG 24...AWG 12
• Maximum Output Frequency : 0.599 kHz
• With Safety Function Safe Brake Management (Sbc/Sbt) : true
• Height : 270.0 mm
• Acceleration And Deceleration Ramps : linear adjustable separately from 0.01...9999 s || S, U or customized
• Maximum Output Voltage : 480 V
• Base Load Current At High Overload : 4.0 A
• Transmission Frame : RTU
• With Safety Function Safe Speed Monitor (Ssm) : false
• Relay Output Number : 2
• With Safety Function Safe Torque Off (Sto) : true
• Data Format : 8 bits, configurable odd, even or no parity
• Base Load Current At Low Overload : 5.6 A
• Connector Type : 3 RJ45
• Pollution Degree : 2 IEC 61800-5-1
• Analogue Output Number : 1
• Physical Interface : 2-wire RS 485
• Minimum Switching Current : relay output R1B 5 mA 24 V DC || relay output R2C 5 mA 24 V DC
• Discrete Input Logic : 16 preset speeds
• Continuous Output Current : 5.6 A 4 kHz normal duty || 4 A 4 kHz heavy duty
• With Safety Function Safe Programmable Logic : false
• Brake Chopper Integrated : true
• Output Voltage : <= power supply voltage
• Nominal Switching Frequency : 4 kHz
• Braking To Standstill : by DC injection
• Discrete Input Type : PTI programmable as pulse input 0-30 kHz, 24 V DC 30 V) || DI1...DI5 safe torque off, 24 V DC 30 V)3.5 kOhm || programmable
• Protection Type : thermal protection motor || safe torque off motor || motor phase loss motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent drive || output overcurrent between motor phase and earth drive || output overcurrent between motor phases drive || short-circuit between motor phase and earth drive || short-circuit between motor phases drive || motor phase loss drive || DC Bus overvoltage drive || line supply overvoltage drive || line supply undervoltage drive || input supply loss drive || exceeding limit speed drive || break on the control circuit drive
• With Safety Function Safely Limited Speed (Sls) : true
• Synchronous Motor Control Profile : permanent magnet motor || reluctance motor
• Specifications
• Country of Origin : Indonesia
• Width : 85.0 mm
• Height : 270.0 mm
• Weight : 1.7 kg
• Variant : standard version
• Product Or Component Type : variable speed drive
• Ip Degree Of Protection : IP20
• Phase : 3 phase
• Communication Port Protocol : Modbus serial || EtherNet/IP || Modbus TCP
• Nominal Output Current : 4.0 A
• Product Specific Application : machine
• Maximum Horse Power Rating : 3 hp normal duty || 2 hp heavy duty
• Supply Frequency : 50...60 Hz +/- 5 %
• Range Of Product : Altivar Machine ATV340
• Motor Power Kw : 2.2 kW normal duty || 1.5 kW heavy duty
• [Us] Rated Supply Voltage : 380...480 V - 15...10 %
• Mounting Mode : cabinet mount
• Emc Filter : class C3 EMC filter integrated
• Environmental data
• Product Contributes To Saved And Avoided Emissions : Yes
• Mercury Free : Yes
• Reach Regulation : Reference contains Substances of Very High Concern above the threshold
• Weee : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• Minimum Percentage Of Recycled Plastic Content : 0
• Take-Back : No
• Global Warming ; Total Life Cycle​ : 1 738 kg CO2 eq.
• Carbon Footprint (Kg Co2 Eq, Total Life Cycle) : 1738.1881784697225
• Rohs Exemption Information : Yes
• Packaging Made With Recycled Cardboard : Yes
• Environmental Disclosure : ENVPEP2311030EN
• Packaging Without Single Use Plastic : Yes
• Scip Number : 81d6792e-d307-4115-9475-2db3f34c93af
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Circularity Profile : ENVEOLI2311030EN
• Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
• Environment
• Product Certifications : UL || CSA || TÜV || EAC || CTick
• Maximum Deflection Under Vibratory Load (During Operation) : 1.5 mm at 2...9 Hz
• Standards : IEC 61800-3 || IEC 61800-5-1 || IEC 60721-3 || IEC 61508 || IEC 13849-1 || UL 618000-5-1 || UL 508C
• Regulation Loop : adjustable PID regulator
• Permitted Relative Humidity (During Operation) : class 3K5 according to EN 60721-3
• Operating Altitude : <= 9842.52 ft (3000 m) with current derating above 1000m
• Overvoltage Category : class III
• Environmental Class (During Operation) : class 3C3 according to IEC 60721-3-3 || class 3S3 according to IEC 60721-3-3
• Maximum Acceleration Under Shock Impact (During Operation) : 70 m/s² at 22 ms
• Pollution Degree : 2
• Electromagnetic Compatibility : electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 || conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
• Ambient Air Temperature For Operation : -15-50 °C without derating vertical position) || 50-60 °C with derating factor vertical position)
• Volume Of Cooling Air : 18.0 m3/h
• Marking : CE
• Maximum Acceleration Under Vibrational Stress (During Operation) : 5 m/s² at 9...200 Hz
• Noise Level : 55.4 dB
• Ambient Air Temperature For Storage : -40-70 °C
• Type Of Cooling : forced convection
• Isolation : between power and control terminals
• Assembly Style : with heat sink
• Operating Position : vertical +/- 10 degree
• Ambient Air Transport Temperature : -40-70 °C