SQUARE D

3-phase stepper motor - 4.8 Nm - shaft Ø 12 mm - L=98 mm - w/o brake - term box

3-PHASE STEPPER MOTOR - 4.8 NM

SQDBRS39AH360ABA BRS39AH360ABA 3606485152820
618.07 / EA
http://schema.org/OutOfStock
Mayer-DDS-3-phase stepper motor - 4.8 Nm - shaft Ø 12 mm - L=98 mm - w/o brake - term box-1
  • Motor Type: 3-phase Stepper Motor
  • Shaft Diameter: 12 mm
  • Shaft End: Smooth Shaft
  • Shaft Length: 30 mm
  • Warranty Length: 18 mth
This product is part of the Lexium SD3 range, an offer of 3phase stepper drives and stepper motors. This is a 3phase stepper motor that features a maximum mechanical speed of 3000RPM, a smooth shaft end (diameter 12mm), without holding brake. It has one angled connector for electrical wiring. It carries out precise step-by-step movements that are predefined by a stepper motor drive. Its stepper capacity is 200 steps per 1.8 degrees, 400 per 0.9, 500 per 0.72, 1000 per 0.36, 2000 per 0.18, 4000 per 0.09, 5000 per 0.072, and 10000 per 0.036. Supply voltage limits are 34VAC, 48VDC, rated current is 5.8A, nominal torque is 4Nm, time constant is 9ms, degree of protection is IP56, shaft end IP41. The motor flange size is 85mm, fixed by 4x 6.5mm holes. The circle diameter of the mounting holes is 98.99mm. It weighs 3.2kg. This stepper motor is designed for Lexium SD3 drives. This product is certified by CE, CUL, and UL. It meets EN/IEC 50178, EN/IEC 61800-5-1, EN/IEC 61800-3 environment 1/2, and EN/IEC 61800-3 standards. It is compatible with SD315 stepper drives. Those mounting positions are allowed per IEC 60034-7 as IM B5 shaft horizontal, IM V1 shaft vertical, shaft end down, IM V3 shaft vertical, shaft end up. The SD3 is an universally applicable stepper motor drive. Stepper drives and stepper motors are for motion control with high accuracy and high torque at low rotation speeds.
QTY
  • Features
  • Specifications
  • Prop 65
    • WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • Physical Attributes
    • Motor Flange Size : 85 mm
    • Shaft Length : 30 mm
  • Conformance Attributes
    • Standards : IEC 50347, IEC 60072-1
  • Complementary Attributes
    • Maximum Axial Force Fa : 175 N tensile force), 30 N force pressure)
    • Maximum Radial Force Fr : 110 N first shaft end), 50 N second shaft end)
    • Line Rated Current : 5.8 A
    • Maximum Mechanical Speed : 3000 rpm
    • Maximum Starting Frequency : 5.3 kHz
  • Important Information Attributes
    • Resolution : 1.8 °, 0.9 °, 0.72 °, 0.36 °, 0.18 °, 0.09 °, 0.072 °, 0.036 ° step angle, 200, 400, 500, 1000, 2000, 4000, 5000, 10000 steps number of full steps per revolution
    • Supply Voltage Limits : 34-34 V AC, 48-48 V DC
    • Vibration Resistance : 20 m/s² maximum, A IEC 60034-14
    • Carbon Footprint Of The Distribution Phase A4 : 0.5225397953, 0.5 kg CO2 eq.
    • Carbon Footprint Of The End Of Life Phase C1 To C4 : 0.4 kg CO2 eq., 0.3870255827
    • Carbon Footprint Of The Installation Phase A5 : 0, 0 kg CO2 eq.
    • Carbon Footprint Of The Manufacturing Phase A1 To A3 : 15 kg CO2 eq., 14.8300454804
    • Carbon Footprint Of The Use Phase B2 B3 B4 B6 : 1 272 kg CO2 eq., 1271.8216767123
    • Medium Desc : 3-phase stepper motor - 4.8 Nm - shaft Ø 12 mm - L=98 mm - w/o brake - term box
    • Local Data Status : Publishable
    • Local Publishable Date : 2026-01-12
    • Global Commercial Status : Commercialised
    • Return Indicator : N
    • Stocking Flag : Y
    • Device Type : Motion - drive & motor
    • Serviceability : Yes
    • Traceability : Yes
    • Field Service Division : IDIBS
    • Average Life Duration : 15 year(s)
    • Legacy Weee Scope : In
    • Scope Perimeter : At least in Europe
    • Eoli Availability Display : No need of specific recycling operations
    • Reach Full Compliance Status : Reference contains Substances of Very High Concern above the threshold
    • Reach Full Compliance Status Id : CONTAINS_SVHC
    • Reach Compliance Directive : Reference contains Substances of Very High Concern above the threshold
    • Rohs Eur In Scope : No
    • Rohs Eur Status : Compliant By Exemption
    • Rohs Eur Full Compliance Status : Compliant By Exemption
    • China Rohs In Scope : Yes
    • With Recycled Cardboard : Yes
    • Without Single Use Plastic : No
    • Product Contributes To Saved And Avoided Emissions : No
    • Product Kit Identifier : N
    • Centring Collar Diameter : 60 mm
    • Circle Diameter Of The Mounting Holes : 98.99 mm
    • Device Short Name : BRS3
    • Electrical Connection : terminal box
    • Holding Brake : without
    • Holding Torque : 4.8 N.m
    • Motor Type : 3-phase stepper motor
    • Mounting Holes Diameter : 6.5 mm
    • Mounting Support : flange
    • Nominal Torque : 4 N.m
    • Product Availability : Non-Stock - Not normally stocked in distribution facility
    • Product Or Component Type : motion control motor
    • Resistance : 0.55 Ohm winding)
    • Returnability : No
    • Rotor Inertia : 2.2 kg.cm²
    • Second Shaft : without second shaft end
    • Service Life In Hours : 20000 h bearing)
    • Shaft Diameter : 12 mm
    • Shaft End : smooth shaft
    • Software Version : EIME v5.8.1
    • Sustainable Packaging : No
    • Temperature Class : F winding IEC 60034-1
    • Time Constant : 9 ms
    • Total Lifecycle Carbon Footprint : 1 288 kg CO2 eq.
    • Type Of Cooling : natural convection
    • Weee Label : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    • Pep Code : ENVPEP1111001EN
    • Database Version : 2016-11
    • Pep Verification Date : 2020-07-01
    • Pcr Version : PCR-ed3-EN-2015 04 02
    • Type Of Verification For The Pep : Independent internal review
    • Data Source : extrapolated product
    • Functional Unit Description : Coordinate and synchronize motion control up to 80W during 10 years and a 70% use rate.
    • Functional Unit Unit : unit
    • Energy Model Manufacturing A1 A3 2 : Energy model used: Germany
    • Energy Model Installation A5 2 : Electricity mix; AC; < 1kV; EU-27
    • Energy Model Use B6 2 : Electricity mix; AC; < 1kV; EU-27
    • Energy Model End Of Life C1 C4 2 : Electricity mix; AC; < 1kV; EU-27
    • Length Total : 141 mm
  • Environment Attributes Main
    • Ip Degree Of Protection : IP56 total except shaft bushing: conforming to IEC 60034-5, IP41 shaft bushing without shaft seal ring: conforming to IEC 60034-5
    • Operating Altitude : <= 3280.84 ft (1000 m) without power derating, <= 3280.84 ft (1000 m) without power derating, <= 3280.84 ft (1000 m) without power derating, <= 3280.84 ft (1000 m) without power derating
    • Take Back : Nej
    • Recycled Metal Content At Cr Level : 0 %
    • China Rohs Regulation : X
    • Mercury Free : Yes
    • Carbon Footprint : 1287.5612875708
    • Ambient Air Temperature For Operation : -25-40 °C
    • Ambient Air Temperature For Storage : -25-70 °C
    • Environmental Disclosure : ENVPEP1111001EN
    • Eu Rohs Directive : Compliant By Exemption
    • Packaging Made With Recycled Cardboard : Yes
    • Packaging Without Single Use Plastic : No
    • Reach Regulation : Reference contains Substances of Very High Concern above the threshold
    • Relative Humidity : 15-85 % without condensation
    • Pep Code : ENVPEP1111001EN
    • Pep Verification Date : 2020-07-01
    • Pcr Version : PCR-ed3-EN-2015 04 02
    • Type Of Verification For The Pep : Independent internal review
  • General Attributes
    • Product Or Component Type : motion control motor
  • ETIM
    • ETIM 8 : EC001851
    • ETIM 9 : EC001851
  • Contractual Warranty Attributes
    • Warranty Period : 18 months
    • Warranty : 18 months