This harmony hub wireless/serial line gateway provides an ergonomic interface for controlling your machines It is impact resistant, dust resistant and vibration resistant thanks to its IP20, making it ideal for operation in harsh environments It is easily installed and replaced on compatible complete push-button units and contact blocks via snap-fit assembly High performance International standards & certifications (IP65)

• Prop 65
• WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

• Specifications
• Country of Origin : Indonesia
• Width : 122 mm
• Height : 90 mm
• Weight : 0.27 kg
• Antenna Type : integrated
• Range Of Product : Harmony
• Product Or Component Type : Harmony Hub wireless/Serial Line gateway
• Communication Port Protocol : Modbus client application
• Product Specific Application : Wireless Schneider Electric devices ecosystem
• Function Of Module : Zigbee green power concentrator
• Device Short Name : ZBRN2
• Transmission Frequency : 2405-2480 MHz
• Environment
• Product Certifications : GOST || CE || UL || C-tick || CSA || CCC
• Standards : CSA C22.2 No 14 || IEC 62311 || IEC 61131-2 || ETSI EN 300 440-2 || ETSI EN 300 328 || IEC 60950-1 || UL 508
• Storage Altitude : 0-3000 m
• Electromagnetic Compatibility : 1.2/50 µs shock waves immunity test - test level: 1 kV (differential mode) conforming to IEC 61000-4-5 || 1.2/50 µs shock waves immunity test - test level: 2 kV (common mode) conforming to IEC 61000-4-5 || immunity to microbreaks and voltage drops - test level: 10 ms conforming to IEC 61000-4-11
• Shock Resistance : 10 gn 16 ms) 6000 shocks IEC 60068-2-27
• Vibration Resistance : +/- 3.5 mm 5-14 Hz) IEC 60068-2-6 || 1 gn 5-150 Hz) on panel mounting IEC 60068-2-6 || 2 gn 8-150 Hz) on DIN rail IEC 60068-2-6
• Ip Degree Of Protection : IP20 IEC 60529 casing) || IP20 terminals)
• Pollution Degree : 2 IEC 60664-1
• Directives : 2006/95/EC - low voltage directive || 2004/108/EC - electromagnetic compatibility || 1999/5/EC - R&TTE directive
• Ambient Air Temperature For Storage : -40-70 °C
• Relative Humidity : 90-90 % -25-55 °C, without condensation ETSI EN 300 440-1
• Radio Agreement : ANATEL, type III ETSI EN 301 489-3 || FCC, category 2 ETSI EN 300 440-1 || ICASA || RSS, category 1 ETSI EN 300 440-1 || SRRC
• Operating Altitude : 0...6561.68 ft (0...2000 m)
• Dielectric Strength : 3000 V between input and output AC || 4250 V between input and output DC || 1500 V between input and ground AC || 2150 V between input and ground DC
• Complementary
• Electrical Connection : 1 conductor cable 0.2-4 mm² - AWG 24...AWG 12 - solid - without cable end IEC 60947-1 || 2 conductors cable 0.2-1.5 mm² - AWG 24...AWG 16 - solid - without cable end IEC 60947-1 || 1 conductor cable 0.2-0.75 mm² - AWG 24...AWG 14 - flexible - with cable end IEC 60947-1 || 2 conductors cable 0.2-2.5 mm² - AWG 24...AWG 18 - flexible - with cable end IEC 60947-1
• [Us] Rated Supply Voltage : 24...240 V AC/DC 50/60 Hz - 10...10 %
• Height : 90 mm
• Short-Circuit Protection : 16 A GB2 circuit breaker
• [Uimp] Rated Impulse Withstand Voltage : 4 kV
• Integrated Connection Type : 1 isolated serial link 2 x RJ45 in parallel Modbus Serial line slave Modbus slave RTU asynchronous in baseband RS485, half duplex, 1.2...115.2 kbauds, 2 twisted shielded pairs
• Status Led : 1 LED Green power ON || 1 LED Yellow communication network || 5 LEDs Red function mode || 1 LED green and yellow reception signal
• Channels Utilisation : <= 60 devices
• Immunity To Microbreaks : 10 ms
• Response Time : < 30 ms
• Data Format : 7 or 8 bits, 1 or 2 stop bits
• Operating Position : any position
• Antenna Gain : 0 dBi
• Net Weight : 0.27 kg
• Topology : devices linked by daisy-chaining or tap junctions
• Surge Withstand : 1 kV differential mode IEC 61000-4-5 || 2 kV common mode IEC 61000-4-5
• Rated Short-Duration Power Frequency Withstand Voltage : 1.5 kV 50 Hz IEC 60947-5-1
• Maximum Sensing Distance : 100 m in free field || 250 m if a relay antenna is located between the transmitter and Harmony Hub || 60 m if an external antenna is connected to Harmony Hub || 25 m with Harmony Hub installed in a metal housing or in a closed metal enclosure
• Mounting Support : 35 mm symmetrical DIN rail conforming to IEC 60715 || mounting plate
• Housing Material : self-extinguishing plastic
• Breaking Capacity : 750 VA
• Control Circuit Frequency : 50...60 Hz +/- 10 %
• Width : 122 mm
• Depth : 60 mm
• Tightening Torque : 0.35-0.4 N.m IEC 60947-1 || 3.09-3.54 lbf.in IEC 60947-1
• Maximum Power Consumption In W : 4 W AC/DC
• Parity : no || even || odd
• Data Storage Equipment : SD card
• Environmental data
• Packaging Made With Recycled Cardboard : Yes
• Environmental Disclosure : ENVPEP101106EN
• Packaging Without Single Use Plastic : Yes
• Scip Number : 25b7f895-3732-43c8-9910-ef6005058640
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Weee : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• Minimum Percentage Of Recycled Plastic Content : 0
• Circularity Profile : ENVEOLI1103010EN
• Take-Back : No
• Carbon Footprint (Kg Co2 Eq, Total Life Cycle) : 34.0667301968