This product is part of the Lexium SD3 and motors an offer of 3-phase stepper drives and stepper motors. The 6-pole stepper motor features 8mm smooth shaft, centring collar of 38mm, without holding brake and second shaft end. It provides a high holding torque, that makes it an optimum solution in applications such pick and place, etc. It is a 3-phase stepper motor with a rated current of 0.9A, a mechanical speed of 3000RPM and a supply voltage of 230V AC, 325V DC. It is furnished with connector for electrical connection. The shaft dimensions are 8mm (Diameter) x 21mm (Length). It offers service life of about 20000h (bearing). It is an IP41 and IP56 rated product. Its dimensions are 116mm (Length) x 57.2mm (Width), centring collar dimensions are 1.6mm (Depth) x 38mm (Diameter) with 66.6mm circle diameter of the mounting hole. It weighs 2kg. This stepper motor is particularly suitable for short-distance positioning, such as labelling. It meets EN 50347 and IEC 60072-1 standards. This stepper motor is compatible with Lexium SD3 stepper drives. It supports 57.2mm flange mount with a natural convection cooling system. 4 mounting holes with 5.2mm diameter. The SD3 is an universally applicable stepper motor drive. The package is ready for operation within a very short period of time. Connect the stepper motor to the drive, set the current and step resolution. The 3-phase stepper motor with a very high-power density. It carries out precise step-by-step movements that are controlled by a drive. The 3-phase stepper motor is accurate, powerful and sturdy and excel with a high-power density.
- Environment
- Ambient Air Temperature For Operation : -25-40 °C
- Standards : IEC 50347 || IEC 60072-1
- Temperature Class : F winding IEC 60034-1
- Vibration Resistance : 20 m/s² maximum || A IEC 60034-14
- Ambient Air Temperature For Storage : -25-70 °C
- Type Of Cooling : natural convection
- Relative Humidity : 15-85 % without condensation
- Ip Degree Of Protection : IP41 shaft bushing: conforming to IEC 60034-5 || IP56 total except shaft bushing: conforming to IEC 60034-5
- Operating Altitude : <= 3280.84 ft (1000 m) without power derating
- Contractual warranty
- Offer Sustainability
- Rohs Exemption Information : Yes
- Mercury Free : Yes
- Environmental Disclosure : ENVPEP111101EN
- Sustainable Offer Status : Green Premium product
- Pvc Free : Yes
- Reach Regulation : Reference contains Substances of Very High Concern above the threshold
- California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Weee : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- China Rohs Regulation : X
- Circularity Profile : N/A
- Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
- Complementary
- Circle Diameter Of The Mounting Holes : 66.6 mm
- Maximum Radial Force Fr : 25 N second shaft end) || 50 N first shaft end)
- Nominal Torque : 1.5 N.m
- Rotor Inertia : 0.38 kg.cm²
- Continuous Stall Torque : 1.53 N.m
- Centring Collar Depth : 1.6 mm
- Holding Brake : without
- Second Shaft : without second shaft end
- Shaft Length : 21 mm
- Net Weight : 2 kg
- Resolution : 1.8 °, 0.9 °, 0.72 °, 0.36 °, 0.18 °, 0.09 °, 0.072 °, 0.036 ° step angle || 200, 400, 500, 1000, 2000, 4000, 5000, 10000 steps number of full steps per revolution
- Angular Acceleration : 200000 rad/s²
- Maximum Starting Frequency : 8.5 kHz
- Time Constant : 4.6 ms
- Peak Stall Torque : 1.53 N.m
- Number Of Mounting Holes : 4
- Holding Torque : 1.7 N.m
- Shaft Diameter : 8 mm
- Mounting Holes Diameter : 5.2 mm
- Service Life In Hours : 20000 h bearing)
- Resistance : 25 Ohm winding)
- Shaft End : smooth shaft
- Electrical Connection : connector
- Line Rated Current : 0.9 A
- Accuracy Error : +/- 6 arc min
- Maximum Axial Force Fa : 100 N tensile force) || 8.4 N force pressure)
- Specifications
- Country of Origin : Germany
- Weight : 2 kg
- Maximum Mechanical Speed : 3000 rpm
- Mounting Support : flange
- Number Of Motor Poles : 6
- Product Or Component Type : motion control motor
- Length : 116 mm
- Centring Collar Diameter : 38 mm
- Motor Flange Size : 57.2 mm
- Motor Type : 3-phase stepper motor
- Supply Voltage Limits : 230-230 V AC || 325-325 V DC
- Range Compatibility : Lexium SD3
- Device Short Name : BRS3