USB Digital Meter, USB-A and USB-C

USB DIGITAL METER USB TYPE A A

KLNET920 ET920 092644691669
41.17 / EA
http://schema.org/OutOfStock
Mayer-DDS-USB Digital Meter, USB-A and USB-C-2
  • Display Type: LCD
  • Height: 0.6 in, 1.5 cm
  • Material: Polymer
  • Overall Length: 2.96 in, 7.5 cm
  • Weight: 0.107 lb
  • Width: 1.96 in, 5 cm
The Klein Tools ET920 is a USB digital meter for Type-A and Type-C ports. It accurately and reliably measures and displays the USB port voltage, current, capacity, energy, and resistance simultaneously. It can function with any USB-A and most USB-C ports, including Qualcomm Quick Charge® ports that have the ability to deliver power. It requires NO batteries as it draws power from the power source to function.
QTY
  • Product Description
  • Features
  • Specifications
The Klein Tools ET920 is a USB digital meter for Type-A and Type-C ports. It accurately and reliably measures and displays the USB port voltage, current, capacity, energy, and resistance simultaneously. It can function with any USB-A and most USB-C ports, including Qualcomm Quick Charge® ports that have the ability to deliver power. It requires NO batteries as it draws power from the power source to function.
  • Warnings
    • To ensure safe operation and service of this meter, follow all instructions. Failure to observe warnings can result in severe injury or death.
    • This meter will NOT display current below 50 milliamperes, even if it is allowing this to pass through. NOTE: The display will show zero current.
    • Do NOT use with ports that operate outside of the rated voltage and current. NEVER use on a circuit with voltage or current that exceeds the maximums specified for this device.
    • Do NOT use during electrical storms or in wet weather. Do NOT use if meter appears damaged. Use caution when working with voltages above 25V RMS or 24V DC. Such voltages pose a shock hazard.
  • Features
    • 3 to 20V DC; Current - 0.05 to 3A (USB-A); 3 to 20V DC; Current - 0.05 to 5A (USB-C)
    • Continuously monitor up to 1000 hours of voltage, current, capacity/charge delivered, energy, and resistance (calculated)
    • Tests most common standard USB-A or USB-C ports, including Qualcomm Quick Charge® ports
    • Store and recall up to 10 readings
    • Voltage and current overload detection
    • Hi-resolution LCD for clear visibility in environments with low ambient lighting
    • Device must be used in line between source being measured and power source
    • Rugged, pocket-sized, and light weight Klein industrial design stands up to jobsite demands
    • Built to withstand a 6.6-Foot (2m) drop
    • No batteries needed; powered by the USB port being tested
    • Fits Any USB-A and USB-C Ports
  • Specifications
    • Elapsed Time : Up to 999 Hours, 59 Min, 59 Secs
    • Capacity Used : 99,999mAh Maximum
    • Current : USB-A - 0.05 to 3A; USB-C - 0.05-5A
    • USB Compatibility : USB-A, USB-C; Qualcomm Quick Charge® Compatible
    • Drop Protection : 2 m (6.6')
    • Energy Delivered : 999Wh Maximum
    • Voltage : 3 to 20V DC
    • Ingress Protection : IP20
    • Display : LCD
    • Overall Height : 0.6" (1.5 cm)
    • Overall Width : 1.96" (5 cm)
    • Application : USB Port Voltage, Current, Capacity, Energy and Resistance (Calculated)
    • Type : USB-A (Type A) and USB-C (Type C)
    • Material : Polymer
    • Resistance : 400 ohms Maximum
    • Overall Length : 2.96" (7.5 cm)
    • Height : 0.5300 in
    • Width : 1.9500 in
    • Depth : 9.0400 in
    • Weight : 0.1070 lbs