Flexcor® Support Grips Standard Duty, Closed Mesh, Single-Eye Grip, Cable Diameter 0.62 - 0.74 in.

SNG SUP GRP .62" CBL SNG EYE

PSSFC062U FC062-U 785007980677
54.10 / EACH
http://schema.org/OutOfStock
Mayer-DDS-Flexcor® Support Grips Standard Duty, Closed Mesh, Single-Eye Grip, Cable Diameter 0.62 - 0.74 in.-1
  • Applications: Industrial
  • Construction: Support And Strain Relief Grips, Various Types Of Pulling
  • Country of Origin: Mexico
  • Indoor/Outdoor: Indoor, Outdoor
  • Length: 10 in
  • Type: Support Grip
  • Width: 0.74 in
FC062U: Standard Duty, Closed Mesh, Single-Eye Grip, Cable Diameter 0.62 - 0.74 inches, Bale Length 8-in, Mesh Length 11-in, Break Strength 960 lbs.
QTY
  • Product Description
  • Features
  • Specifications
FC062U: Standard Duty, Closed Mesh, Single-Eye Grip, Cable Diameter 0.62 - 0.74 inches, Bale Length 8-in, Mesh Length 11-in, Break Strength 960 lbs.
  • Features
    • Closed mesh support grips are used when the end of the cable is accessible.
    • Standard duty closed mesh support grips are designed for loads up to 600 lbs.
    • Vertical runs of no more than 100 ft.
    • They are available in a variety of eye styles and cable ranges for supporting electrical and fiber optic cable, metal rods, and tubing.
    • Support grips are woven of corrosion-resistant tinned-stainless steel wire.
    • Most Flexcor products have UL and/or CSA approvals. Please contact factory for approval information.
    • Bale Length: 8: Mesh Length: 11
  • Certifications
    • CSA Listed
  • Specifications
    • Length : 10.0 in
    • Product Line : Pass & Seymour
    • Width : 0.74 in
    • Eye Style : Single
    • Country of Origin : Mexico
    • Mesh Type : Closed
    • Type : Support Grip
    • Indoor/Outdoor : Both
    • Mesh Length : 10.0 in
    • Maximum Cable Range : 0.62 in
    • Minimum Cable Range : 0.74 in
    • Application Sector : Industrial
    • Approximate Break Strength : 890.0 lb
    • Cable Diameter Range : 0.630-0.740 in
    • Capacity : Various Cable Diameter Ranges
    • Standard : UL/CSA Approval (consult factory)
    • Mounting : Consult the Factory for Mounting Recommendations
    • Construction : Support and Strain Relief Grips, Various Types of Pulling
    • Special Features : Standard closed mesh support grips are designed for loads up to 600 lbs. and vertical runs of no more than 100 ft. They are available in a variety of eye styles and cable ranges for supporting electrical and fiber optic cable, metal rods, and tubing. Closed mesh support grips are used when the end of the cable is accessible. Support grips are woven of corrosion-resistant tinned-bronze wire.